Top

Journal of Coatings Technology and Research

Published in:

21-07-2021

Synthesis of UV-curable polyesters with lateral double bonds by ring-opening polymerization and their properties

Authors: Yumei Zhou, Shujie Ming, Liuyan Tang, Jinqing Qu

Published in: Journal of Coatings Technology and Research | Issue 6/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

UV-curable coatings have been receiving more and more attention for their high performance and environmentally friendly advantages, which meet the “5 E” requirements of coating development. Vinyl oligomer is the main factor affecting the performance of UV-curable coating, but it is difficult to meet the requirements of high-end UV curing technology due to its high viscosity, low vinyl functionality, and high cost. Herein, polyesters with lateral double bonds were prepared by ring-opening polymerization of acid anhydride and glycidyl methacrylate. The epoxy compound without vinyl groups was used to participate in the polymerization reaction to adjust the viscosity and vinyl functionality of the resin. Furthermore, the molecular structure and molecular weight of the polyesters were characterized by FTIR, ¹H NMR, and GPC. The effects of the categories and proportions of acid anhydride and glycidyl ether on the viscosity and hardness of the coating films were studied. The results indicated that the use of acid anhydrides containing phenyl rigid groups could significantly increase the hardness of the paint film, and the long-chain tertiary glycidyl carbonate (E10P) had the best viscosity reduction effect. When the molar ratio of acid anhydride, GMA and E10P was 4:1:3, the viscosity of the prepared vinyl polyester was low to 2755 mPa·s. In this case, the hardness of the paint film was as high as H, and it also exhibited excellent water resistance and alcohol resistance.

previous article Polymerizable allyl anionic and nonionic emulsifier: synthesis and properties of its emulsion for architectural coating

next article Simplification of interior latex paint using biopolymer to replace rheological additives and calcium carbonate extender

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Yang, X, Liu, J, Wu, Y, Cheng, F, Jiao, X, Lai, G, “Fabrication of UV-Curable Solvent-Free Epoxy Modified Silicone Resin Coating with High Transparency and Low Volume Shrinkage.” Prog. Org. Coat., 129 96–100 (2019)CrossRef

Liu, J-M, Wang, S-S, Su, Q-P, He, J-J, Li, Y, Xie, J, Yi, G-B, “Synthesis of a Novel Hyperbranched Polyester with Carboxyl End Groups Applied to UV-Curable Waterborne Coating.” J. Coat. Technol. Res., 147 1–11 (2020)

Ge, H-W, Zhang, J-F, Yuan, Y, Liu, R, Liu, X, “Preparation of Organic–Inorganic Hybrid Silica Nanoparticles with Contact Antibacterial Properties and Their Application in UV-Curable Coatings.” Prog. Org. Coat., 106 20–26 (2017)CrossRef

Rawat, R-S, Chouhan, N, Talwar, M, Diwan, R-K, Tyagi, A-K, “UV Coatings for Wooden Surfaces.” Prog. Org. Coat., 135 490–495 (2019)CrossRef

Dehmen, O-G, Onen, H-A, Yildiz, Z, Gungor, A, “Chemical, Mechanical, and Thermal Properties of UV-Curable Cellulose Acetate Butyrate-Based Oligomers and Their Electrospun Fibrous Mats.” J. Coat. Technol. Res., 17 (4) 1043–1052 (2020)CrossRef

Wei, G, Xu, H, Chen, L, Li, Z, Liu, R, “Isosorbide-Based High Performance UV-Curable Reactive Diluents.” Prog. Org. Coat., 126 162–167 (2019)CrossRef

Xu, Y, Luo, J, Liu, X, Liu, R, “Polyurethane Modified Epoxy Acrylate Resins Containing ε-Caprolactone Unit.” Prog. Org. Coat., 141 105543 (2020)CrossRef

Gao, F, Cao, C-G, Wang, Q-B, Liu, R, Zhang S, Liu G-C, Liu, X-Y, “Properties of UV-Cured Self-Healing Coatings Prepared with PCDL-Based Polyurethane Containing Multiple H-Bonds.” Prog. Org. Coat., 113 160–167 (2017)CrossRef

Yan, Z, Liu, W, Gao, N, Ma, Z, Han, M, “Synthesis and Characterization of a Novel Difunctional Fluorinated Acrylic Oligomer Used for UV-Cured Coatings.” J. Fluor. Chem., 147 49–55 (2013)CrossRef

10.

Deng, L, Tang, L, Qu, J-Q, “Synthesis and Photopolymerization of Novel UV-Curable Macro-Photoinitiators.” Prog. Org. Coat., 141 105546 (2020)CrossRef

11.

Şabani, S, Önen, A-H, Güngör, A, “Preparation of Hyperbranched Polyester Polyol-Based Urethane Acrylates and Applications on UV-Curable Wood Coatings.” J. Coat. Technol. Res., 9 (6) 703–716 (2012)CrossRef

12.

Li, X, Liu, Z, Hong, P, “Synthesis of Organic and Inorganic Hybrid Nanoparticles as Multifunctional Photoinitiator and Its Application in UV-Curable Epoxy Acrylate-Based Coating Systems.” Prog. Org. Coat., 141 105565 (2020)CrossRef

13.

Cheong, M-Y, Ooi, T-L, Ahmad, S, Md, W, Yunus, Z-W, Kuang, D, “Synthesis and Characterization of Palm-Based Resin for UV Coating.” J. Appl. Polym. Sci., 111 (5) 2353–2361 (2009)CrossRef

14.

Chittavanich, P, Miller, K, Soucek, M-D, “A Photo-Curing Study of a Pigmented UV-Curable Alkyd.” Prog. Org. Coat., 73 392–400 (2012)CrossRef

15.

Shi, H, Liu, W, Liu, C, Wang, Z, “UV-Curable Waterborne Epoxy Acrylate Coating Modified by Monomethacryloyloxy-Terminated Fluorinated Oligomer.” J. Coat. Technol. Res., 16 (5) 1305–1316 (2019)CrossRef

16.

Wu, J, Zhang, R, Li, P, Ma, G, Hou, C, Zhang, H, “Synthesis of Fluorinated Polyacrylic Acrylate Oligomer for the UV-Curable Coatings.” J. Coat. Technol. Res., 16(3) 681–688 (2019)CrossRef

17.

Wei, D-D, Huang, X-M, Zeng, J-J, Deng, S-L, Xu, J-H, “Facile Synthesis of a Castor Oil-Based Hyperbranched Acrylate Oligomer and Its Application in UV-Curable Coatings.” J. Appl. Polym. Sci., 137 e49054 (2020)CrossRef

18.

Mousaa, I-M, “Synthesis and Performance of Bio-Based Unsaturated Oligomer and Containing Gum Arabic as a Novel Protective Steel Coating Under UV Irradiation.” Prog. Org. Coat., 139 105400 (2020)CrossRef

19.

Liu, F, Ying, W, Xue, X, He, Y, “Temperature Dependence of the Viscosity of Epoxy Acrylate-Tripropylene Glycol Diacrylate Binary Mixtures.” e-Polymers, 15 447–450 (2015)CrossRef

20.

Lv, C-H, Hu, L, Yang, Y, Li, H-B, “Waterborne UV-Curable Polyurethane Acrylate/Silica Nanocomposites for Thermochromic Coatings.” RSC Adv., 5 25730–25737 (2015)CrossRef

21.

Park, J-M, Jeon, J-H, Lee, Y-H, Lee, D-J, Park, H, Kim, H-D, “Synthesis and Properties of UV-Curable Polyurethane Acrylates Containing Fluorinated Acrylic Monomer/Vinyltrimethoxysilane.” Polym. Bull., 72 1921–1936 (2015)CrossRef

22.

Yan, R, Yang, D-L, Zhang, N-N, Zhao, Q, Liu, B-J, Xiang, W, Sun, Z-Y, Xu, R, Zhang, M-Y, Hu, W, “Performance of UV Curable Lignin Based Epoxy Acrylate Coatings.” Prog. Org. Coat., 116 83–89 (2018)CrossRef

23.

Wang, Q, Chen, G, Cui, Y, Tian, J, He, M, Yang, J, “Castor Oil Based Biothiol as a Highly Stable and Self-Initiated Oligomer for Photoinitiator-Free UV Coatings.” ACS Sustain. Chem. Eng., 5 376–381 (2017)CrossRef

24.

Ghomi, E-R, Neisiany, R-E, Khorasani, N, Dinari, S-M, Ataei, S, Koochaki, M-S, Ramakrishna, S, “Development of an Epoxy Self-Healing Coating Through the Incorporation of Acrylic Acid-Co-Acrylamide Copolymeric Gel.” Prog. Org. Coat., 149 105948 (2020)CrossRef

25.

Norouzi, S, Mohseni, M, Yahyaei, H, “Preparation and Characterization of an Acrylic Acid Modified Polyhedral Oligomeric Silsesquioxane and Investigating Its Effect in a UV Curable Coating.” Prog. Org. Coat., 99 1–10 (2016)CrossRef

26.

Deflorian, F, Fedel, M, Dirèa, S, Tagliazuccaa, V, Bongiovanni, R, Vescovo, L, Minelli, M, Angelis, M-G, “Study of the Effect of Organically Functionalized Silica Nanoparticles on the Properties of UV Curable Acrylic Coatings.” Prog. Org. Coat., 72 44–51 (2011)CrossRef

27.

Choi, J-S, Seo, J, Khanc, S-B, Janga, E-S, Hana, H, “Effect of Acrylic Acid on the Physical Properties of UV-Cured Poly(Urethane Acrylate-Co-Acrylic Acid) Films for Metal Coating.” Prog. Org. Coat., 71 110–116 (2011)CrossRef

28.

Claesson, H, Malmström, E, Johansson, M, Hult, A, Doyle, M, Månson, J-E, “Rheological Behaviour During UV-Curing of a Star-Branched Polyester.” Prog. Org. Coat., 44 63–67 (2002)CrossRef

29.

Zheng, Y, Li, S, Weng, Z, Gao, C, “Hyperbranched Polymers: Advances from Synthesis to Applications.” Chem. Soc. Rev., 44 4091–4130 (2015)CrossRef

30.

Dzunuzovic, E, Tasic, S, Boz, B, Jeremic, K, Dunjic, B, “Photoreactive Hyperbranched Urethane Acrylates Modified with a Branched Saturated Fatty Acid.” React. Funct. Polym., 66 1097–1105 (2006)CrossRef

31.

Dong, R, Zhou, Y, Zhu, X, “Supramolecular Dendritic Polymers: From Synthesis to Applications.” Acc. Chem. Res., 47 2006–2016 (2014)CrossRef

32.

Huang, S, Xiao, J, Zhu, Y-A, Qu, J-Q, “Synthesis and Properties of Spray-Applied High Solid Content Two Component Polyurethane Coatings Based on Polycaprolactone Polyols.” Prog. Org. Coat., 106 60–68 (2017)CrossRef

33.

Ryu, H-K, Bae, D-Y, Lim, H, Lee, E, Son, S-K, “Ring-Opening Copolymerization of Cyclic Epoxide and Anhydride Using a Five-Coordinate Chromium Complex with a Sterically Demanding Amino Triphenolate Ligand.” Polymers, 11 3756 (2020)

34.

Fieser, M-E, Sanford, M-J, Mitchell, L-A, Dunbar, C-R, Mandal, M, Zee, V, Nathan, J, Urness, D-M, Cramer, C-J, Coates, G-W, Tolman, W-B, “Mechanistic Insights into the Alternating Copolymerization of Epoxides and Cyclic Anhydrides Using a (Salph)AlCl and Iminium Salt Catalytic System.” J. Am. Chem. Soc., 139 (42) 163 (2017)CrossRef

35.

Zhang, B, Li, H, Luo, H, Zhao, J, “Ring-Opening Alternating Copolymerization of Epichlorohydrin and Cyclic Anhydrides Using Single- and Two-Component Metal-Free Catalysts.” Eur. Polym. J., 134 109820 (2020)CrossRef

36.

Di Ciccio, A-M, Coates, G-W, “Ring-Opening Copolymerization of Maleic Anhydride with Epoxides: A Chain-Growth Approach to Unsaturated Polyesters.” J. Am. Chem. Soc., 133 10724–10727 (2011)CrossRef

37.

Zhang, T, Wu, W, Wang, X, Mu, Y, “Effect of Average Functionality on Properties of UV-Curable Waterborne Polyurethane-Acrylate.” Prog. Org. Coat., 68 201–207 (2010)CrossRef

38.

Mishra, V, Desai, J, Patel, K-I, “High-Performance Waterborne UV-Curable Polyurethane Dispersion Based on Thiol-Acrylate/Thiol-Epoxy Hybrid Networks.” J. Coat. Technol. Res., 14 (5) 1–13 (2017)CrossRef

39.

Arnaud, S-P, Hashemi, P, Mischnick, P, Robert, T, “Optimized Synthesis of Highly Reactive UV-Curable Hyperbranched Polyester Acrylates.” J. Coat. Technol. Res., 17 (3) 127–143 (2020)CrossRef

40.

Theophanides, T, “Applications of FTIR on Epoxy Resins—Identification, Monitoring the Curing Process, Phase Separation and Water Uptake.” Mater. Sci. Eng. https://doi.org/10.5772/2055 (2012)CrossRef

41.

Jiao, Z, Yang, Q, Wang, X, Wang, C, “UV-Curable Hyperbranched Urethane Acrylate Oligomers Modified with Different Fatty Acids.” Polym Bull., 74 5049–5063 (2017)CrossRef

Title: Synthesis of UV-curable polyesters with lateral double bonds by ring-opening polymerization and their properties
Authors: Yumei Zhou
Shujie Ming
Liuyan Tang
Jinqing Qu
Publication date: 21-07-2021
Publisher: Springer US
Published in: Journal of Coatings Technology and Research / Issue 6/2021
Print ISSN: 1547-0091
Electronic ISSN: 1935-3804
DOI: https://doi.org/10.1007/s11998-021-00513-w

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 6/2021

Halloysite nanotubes-based nanocomposites for the hydrophobization of hydraulic mortar

Simplification of interior latex paint using biopolymer to replace rheological additives and calcium carbonate extender

Polymerizable allyl anionic and nonionic emulsifier: synthesis and properties of its emulsion for architectural coating

Influence of iron and nickel on the microwave absorption and other functional properties of nanographite-based nanocomposite paints

The influence of methacrylic acid and urethane methacrylate on the film properties of hybrid urethane–acrylic latexes

Polyimide–polyester hybrid UV-curable powder coating

Premium Partners