Top

Journal of Materials Engineering and Performance

Published in:

14-12-2018

The Effect of Bainite Type on the Evolution of Carbide Constituent During an Accelerated Aging in Cr-Mo-V Steel

Authors: Yongtao Zhang, Peng Luo, Haitao Yan, Hanqian Zhang, Jinfu Li

Published in: Journal of Materials Engineering and Performance | Issue 1/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This paper aims to understand the effect of the type of bainite (i.e., the lower, the upper and the granular, developed by bainitic hardening at 550, 650 and 750 °C, respectively) on the evolution of carbide constituent due to a subsequent aging (at 700 °C for up to 500 h). The secondary carbides were identified by x-ray diffraction in the configurations of M₃C, M₇C₃, M₂₃C₆, M₂C, M₆C and MC (M=Fe, Cr, Mo, Mn and V), which varied with the time of aging. Despite that the three types of bainites shared similar constituent of carbides after the aging for 2-100 h, the constituent of the upper bainite (M₇C₃ + M₂₃C₆ + MC) was different from that of granular bainite and lower bainite (M₇C₃ + M₂₃C₆ + MC + M₆C) after the aging for 500 h. The concentration of the enrichment of alloying elements in ferrite matrix plays a dominant role in governing the precipitation of carbides in the aged steel.

previous article Impact of Hot Bending on the High-Temperature Performance and Hydrogen Damage of 2.25Cr-1Mo-0.25V Steel

next article Effect of Cold Deformation and Heat Treatment on the Microstructure and Mechanical Behavior of High Entropy Alloy CuCrFeNi2Al0.5

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Y. Wang, G. Cheng, M. Qin, Q. Li, Z. Zhang, K. Chen, Y. Li, H. Hu, W. Wu, and J. Zhang, Effect of High Temperature Deformation on the Microstructure, Mechanical Properties and Hydrogen Embrittlement of 2.25Cr-1Mo-0.25 V Steel, Int. J. Hydrogen Energy, 2017, 42(38), p 24549–24559CrossRef

V. Dudko, A. Belyakov, D. Molodov, and R. Kaibyshev, Microstructure Evolution and Pinning of Boundaries by Precipitates in a 9 pct Cr Heat Resistant Steel During Creep, Metall. Mater. Trans. A, 2011, 44(1), p 162–172

P.J. Ennis, A. Zielinska-Lipiec, O. Wachter, and A. Czyrska-Filemonowicz, Microstructural Stability and Creep Rupture Strength of the Martensitic Steel P92 for Advanced Power Plant, Acta Mater., 1997, 45(12), p 4901–4907CrossRef

T.H. Chen, K.L. Weng, and J.R. Yang, The Effect of High-Temperature Exposure on the Microstructural Stability and Toughness Property in a 2205 Duplex Stainless Steel, Mater. Sci. Eng. A, 2002, 338(1), p 259–270CrossRef

X. Wang, Y. Li, H. Li, S. Lin, and Y. Ren, Effect of Long-Term Aging on the Microstructure and Mechanical Properties of T23 Steel Weld Metal Without Post-Weld Heat treatment, J. Mater. Process. Technol., 2018, 252, p 618–627CrossRef

A. Zieliński, G. Golański, and M. Sroka, Influence of Long-Term Ageing on the Microstructure and Mechanical Properties of T24 Steel, Mater. Sci. Eng. A, 2017, 682, p 664–672CrossRef

J. Janovec, M. Svoboda, A. Výrostková, and A. Kroupa, Time-Temperature-Precipitation Diagrams of Carbide Evolution in Low Alloy Steels, Mater. Sci. Eng. A, 2005, 402(1–2), p 288–293CrossRef

B.A. Senior, A Critical Review of Precipitation Behaviour in 1 Cr-Mo-V Rotor Steels, Mater. Sci. Eng. A, 1988, 103(2), p 263–271CrossRef

R.G. Baker and J. Nutting, The Tempering of 2.25Cr-1Mo Steel After Quenching and Normalizing, J. Iron. Steel Inst., 1959, 192, p 257–268

10.

P. Maugis, F. Danoix, M. Dumont, S. Curelea, S. Cazottes, H. Zapolsky, and M. Gouné, Carbon Diffusivity and Kinetics of Spinodal Decomposition of Martensite in a Model Fe-Ni-C Alloy, Mater. Lett., 2018, 214, p 213–216CrossRef

11.

Z. Qiao, Y. Liu, L. Yu, and Z. Gao, Formation Mechanism of Granular Bainite in a 30CrNi3MoV Steel, J. Alloys Compd., 2009, 475(1–2), p 560–564

12.

Z.K. Liu and J. Agren, Morphology of Cementite Decomposition in an Fe-Cr-C Alloy, Metall. Mater. Trans. A, 1991, 22(8), p 1753–1759CrossRef

13.

G. Ghosh and G.B. Olson, Precipitation of Paraequilibrium Cementite: Experiments, and Thermodynamic and Kinetic Modeling, Acta Mater., 2002, 50(8), p 2099–2119CrossRef

14.

A. Joarder, Effects of Long-Term Service Exposure on Microstructure and Properties of a Cr-Mo-V Steel Turbine Rotor Steel, Metall. Mater. Trans. A, 1991, 22(8), p 1811–1820CrossRef

15.

K.W. Andrews, H. Hughes, and D.J. Dyson, Constitution Diagrams For Cr-Mo-V Steels, J. Iron. Steel Inst., 1972, 210, p 337–350

16.

K. Kuo, Alloy Carbides Precipitated During the Fourth Stage of Tempering, J. Iron. Steel Inst., 1956, 184, p 258–268

17.

Y.T. Zhang, H.B. Han, L.D. Miao, H.Q. Zhang, and J.F. Li, Quantitative Carbide Analysis Using the Rietveld Method for 2.25Cr-1Mo-0.25 V Steel, Mater. Charact., 2009, 60(9), p 953–956CrossRef

18.

A. Inoue and T. Masumoto, Carbide Reactions (M₃C → M₇C₃ → M₂₃C₆ → M₆C) During Tempering of Rapidly Solidified High Carbon Cr-W and Cr-Mo Steels, Metall. Trans. A, 1980, 11(5), p 739–747CrossRef

19.

J. Janovec, M. Svoboda, A. Kroupa, and A. Vyrostková, Thermal-Induced Evolution of Secondary Phases in Cr-Mo-V Low Alloy Steels, J. Mater. Sci., 2006, 41(11), p 3425–3433CrossRef

20.

S. Saroja, P. Parameswaran, M. Vijayalakshmi, and V.S. Raghunathan, Prediction of Microstructural States in Cr-Mo Steels Using Phase Evolution Diagrams, Acta Metall. Mater., 1995, 43(8), p 2985–3000CrossRef

21.

H.T. Yang and S.T. Kim, A Study on the Mechanical Strength Change by Thermal Aging of 2.25Cr-1Mo Steel, Mater. Sci. Eng. A, 2001, 319–321, p 316–320CrossRef

Title: The Effect of Bainite Type on the Evolution of Carbide Constituent During an Accelerated Aging in Cr-Mo-V Steel
Authors: Yongtao Zhang
Peng Luo
Haitao Yan
Hanqian Zhang
Jinfu Li
Publication date: 14-12-2018
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 1/2019
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-018-3808-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1/2019

Design and Development of Galvannealed Dual-Phase Steel: Microstructure, Mechanical Properties and Weldability

Study on the Deformation Homogeneity and Electrical Conductivity in Co-Cr-Ni-Mo Wires Drawn with Different Drawing Practices

Workability Characteristics and Deformation Mechanisms of Die-Cast AM60 and AZ91 Magnesium Alloys: Correlation with Processing Maps

Effect of Sintering Atmosphere on the Synthesis Process, Electrical and Mechanical Properties of NiFe2O4/Nano-TiN Ceramics

Microstructure Evolution and Mechanical Property of Low-Alloy Steel Used for Armor Layer of Flexible Pipe During Thermomechanical Process and Hot Rolling Process

Influence of Bias Voltage and CH4/N2 Gas Ratio on the Structure and Mechanical Properties of TiCN Coatings Deposited by Cathodic Arc Deposition Method

Premium Partners