Top

Polymer Science, Series D

Published in:

01-06-2022

The Effect of Reinforcing Fillers of Different Types on Properties of VK-51 Adhesive

Authors: A. P. Petrova, N. F. Lukina, A. Yu. Isaev

Published in: Polymer Science, Series D | Issue 2/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The properties of a VK-51 high-strength epoxy film adhesive containing different reinforcing fabric fillers are given. The effect of reinforcing fillers—fabrics based on a mixture of lavsan and viscose fibers (90 : 10%) and BNK-40 latex or based on 100% lavsan fiber (VK-51A adhesive), a T-10-80 fiberglass (VK-51 AS adhesive), and an A3(S)-type fiberglass mesh (VK-51MA adhesive)—on the properties of the adhesive and adhesive joints on its basis is shown.

previous article Studying Low-Temperature Properties of Bitumen Materials

next article Investigation of the Chemical Composition of Aminoformadehyde Materials by the IR Fourier Spectrometric Method

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

L. A. Dement’eva, L. I. Bocharova, N. F. Lukina, and A. P. Petrova, “High-strength film adhesives VK-51 and VK-51A,” Klei. Germetiki, Tekhnol., No. 4, 17–19 (2015).

Aviation Materials: Handbook, Vol. 10: Adhesives, Sealants, Rubbers, and Hydraulic Fluids, Part 1: Adhesives and Adhesive Prepregs, Ed. by E. N. Kablov, 7th ed. (All-Russian Scientific Research Institute of Aviation Materials, Moscow, 2019) [in Russian].

A. P. Petrova, N. F. Lukina, E. V. Rubtsova, and A. Yu. Isaev, “Influence of reinforcement of epoxy film adhesive VK-51 with non-woven fibrous material on its properties,” Tr. Vseross. Nauchno-Issled. Inst. Aviats. Mater., No. 9, 5 (2019). https://doi.org/10.18577/2307-6046-2018-0-9-47-56

E. N. Kablov, “Innovative developments of the All-Russian Scientific Research Institute of Aviation Materials within the project “Strategic development of materials and technologies of their recycling until 2030,” Aviats. Mater. Tekhnol., No. 1, 3–33 (2015). https://doi.org/10.18577/2071-9140-2015-0-1-3-33

E. N. Kablov, “Russia in the market of intellectual resources,” Ekspert, No. 28 (951), 48–51 (2015).

E. N. Kablov, “Advanced materials: creation and recycling as a basis for innovations,” Kryl’ya Rodiny, No. 5, 8–18 (2016).

E. N. Kablov, “Aerospace materials science,” Vse Mater., No. 3, 2–14 (2008).

Gluing in Machine Enineering: Handbook, Ed. by G. V. Malysheva (Nauka i Tekhnologiya, Moscow, 2005), Vol. 1, pp. 435–445.

M. Ya. Gofin and A. A. Ivanov, Mechanics of Honeycomb Constructions: Handbook, Vol. 1: Design and Development of Honeycomb Constructions. Experimental Studies (Mir, Moscow, 2010) [in Russian].

10.

A. P. Petrova and A.A. Donskoii, Adhesive Materials. Sealants (Professional, St. Petersburg, 2008) [in Russian].

11.

A. P. Petrova and G. V. Malysheva, Adhesives, Adhesive Binders and Adhesive Prepregs: Manual, Ed. by E. N. Kablov (All-Russian Scientific Research Institute of Aviation Materials, Moscow, 2017) [in Russian].

12.

V. T. Minakov, V. I. Postnov, N. I. Shvets, O. B. Zastrogina, V. I. Petukhov, and K. V. Makrushin, “Specific manufacture of three-layer honeycomb panels with hot curing polymer filler,” Aviats. Mater. Tekhnol., No. 3, 6–9 (2009).

13.

A. B. Laptev, S. L. Barbot’ko, and E. V. Nikolaev, “The persistence of material properties under the influence of climatic and operational factors,” Aviats. Mater. Tekhnol., Suppl., 547–561 (2017). https://doi.org/10.18577/2071-9140-2017-0-S-547-561

14.

I. A. Sharova, “National and foreign experience in the development of cold curing epoxy adhesives,” Tr. Vseross. Nauchno-Issled. Inst. Aviats. Mater., No. 7, 5 (2014). https://doi.org/10.18577/2307-6046-2014-0-7-5-5

Title: The Effect of Reinforcing Fillers of Different Types on Properties of VK-51 Adhesive
Authors: A. P. Petrova
N. F. Lukina
A. Yu. Isaev
Publication date: 01-06-2022
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 2/2022
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421222020204

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2022

The Influence of Filler on the Properties of Resin–Metal Compounds

Thermally Stable Polyimide Structural Adhesives

Sorption Interactions in the Hydroxyapatite–CuSO4 Aqueous Solution System

As Study of the Effect of 3D-Printing Process Parameters on the Antiadhesive Properties of the Surfaces of Master Models

Chitosan–Melanin Polymer Complex: A Promising Ingredient in Emulsion Compositions

Properties of Block Polyetheretherketones

Premium Partners