Skip to main content
Top
Published in: Journal of Coatings Technology and Research 4/2011

01-07-2011

The evolution of surface texture in automotive coatings

Authors: Cindy A. Peters, Mark E. Nichols, Kevin R. J. Ellwood

Published in: Journal of Coatings Technology and Research | Issue 4/2011

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The curing behavior and texture development of automotive clearcoats was studied by noncontacting profilometry and dynamic viscosity measurements during solvent evaporation and thermal curing. The changing surface texture was shown to be a strong function of temperature and solvent content. Leveling occurred during the initial heating of the clearcoats, while smaller wavelength roughness was observed to appear during cooling after curing. The dynamic viscosity was shown to be a strong function of catalyst loading. Numerical simulations were conducted to calculate the apparent viscosity during the leveling process. Calculated viscosity profiles matched theoretical predictions for the behavior of these clearcoats.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Wicks, Z, Jones, F, Papas, S, Organic Coatings: Science and Technology, 2nd ed. Wiley-Interscience, New York (1999) Wicks, Z, Jones, F, Papas, S, Organic Coatings: Science and Technology, 2nd ed. Wiley-Interscience, New York (1999)
2.
go back to reference Cheever, D, Ngo, P, “Effect of Substrate and Paint Layers on the Roughness and Appearance of a Silver Base Coat/Clear Coat System.” J. Coat. Technol., 61 (770) 65–71 (1989) Cheever, D, Ngo, P, “Effect of Substrate and Paint Layers on the Roughness and Appearance of a Silver Base Coat/Clear Coat System.” J. Coat. Technol., 61 (770) 65–71 (1989)
3.
go back to reference Tachi, K, Okuda, C, Yamada, K, “Gloss of Coatings Applied by Electrostatic Rotary-Bell Spraying.” J. Coat. Technol., 62 (791) 19 (1990) Tachi, K, Okuda, C, Yamada, K, “Gloss of Coatings Applied by Electrostatic Rotary-Bell Spraying.” J. Coat. Technol., 62 (791) 19 (1990)
4.
go back to reference Orchard, S, “On Surface Levelling in Viscous Liquids and Gels.” Appl. Sci. Res., 11A 451–464 (1962) Orchard, S, “On Surface Levelling in Viscous Liquids and Gels.” Appl. Sci. Res., 11A 451–464 (1962)
5.
go back to reference Overdiep, W, “The Levelling of Paints.” Prog. Org. Coat., 14 159–175 (1986)CrossRef Overdiep, W, “The Levelling of Paints.” Prog. Org. Coat., 14 159–175 (1986)CrossRef
6.
go back to reference Wilson, S, “The Derivation and Analysis of a Model of the Drying Process of a Paint Film.” Surf. Coat. Int., 4 162 (1997)CrossRef Wilson, S, “The Derivation and Analysis of a Model of the Drying Process of a Paint Film.” Surf. Coat. Int., 4 162 (1997)CrossRef
7.
go back to reference Cohu, O, Magnin, A, “The Levelling of Thixotropic Coatings.” Prog. Org. Coat., 28 89–96 (1996)CrossRef Cohu, O, Magnin, A, “The Levelling of Thixotropic Coatings.” Prog. Org. Coat., 28 89–96 (1996)CrossRef
8.
go back to reference Bosma, M, Brinkhuis, R, Coopmans, J, Reuvers, B, “The Role of Sag Control Agents in Optimizing the Sag/Leveling Balance and a New Powerful Tool to Study This.” Prog. Org. Coat., 55 97 (2006)CrossRef Bosma, M, Brinkhuis, R, Coopmans, J, Reuvers, B, “The Role of Sag Control Agents in Optimizing the Sag/Leveling Balance and a New Powerful Tool to Study This.” Prog. Org. Coat., 55 97 (2006)CrossRef
9.
go back to reference Eley, R, “Interaction of Rheology, Geometry, and Process in Coating Flows.” J. Coat. Technol., 74 (932) 43–53 (2002)CrossRef Eley, R, “Interaction of Rheology, Geometry, and Process in Coating Flows.” J. Coat. Technol., 74 (932) 43–53 (2002)CrossRef
10.
go back to reference Weidner, D, Schwartz, L, Eley, R, “Role of Surface Tension Gradients in Correcting Coating Defects in Corners.” J. Colloid Interface Sci., 179 66–75 (1996)CrossRef Weidner, D, Schwartz, L, Eley, R, “Role of Surface Tension Gradients in Correcting Coating Defects in Corners.” J. Colloid Interface Sci., 179 66–75 (1996)CrossRef
11.
go back to reference Bhattacharya, D, Seo, K, Germinario, L, Clark, M, McCreight, K, Williams, C, “Novel Techniques to Investigate the Impact of Cellulose Esters on the Rheological Properties and Appearance in Automotive Basecoat Systems.” J. Coat. Technol. Res., 4 139–150 (2007)CrossRef Bhattacharya, D, Seo, K, Germinario, L, Clark, M, McCreight, K, Williams, C, “Novel Techniques to Investigate the Impact of Cellulose Esters on the Rheological Properties and Appearance in Automotive Basecoat Systems.” J. Coat. Technol. Res., 4 139–150 (2007)CrossRef
12.
go back to reference Nichols, M, Ellwood, K, Peters, C, “Texture Evolution During Curing of Automotive Coatings.” PMSE Prepints, 99 187 (2008) Nichols, M, Ellwood, K, Peters, C, “Texture Evolution During Curing of Automotive Coatings.” PMSE Prepints, 99 187 (2008)
13.
go back to reference Oosterlinck, F, Steenwinkel, P, Tennebroek, R, Steeman, P, “Waterborne Coatings—Body Building Studied.” Eur. Coat. J., 3 96–119 (2009) Oosterlinck, F, Steenwinkel, P, Tennebroek, R, Steeman, P, “Waterborne Coatings—Body Building Studied.” Eur. Coat. J., 3 96–119 (2009)
14.
go back to reference Mori, J, Kubota, H, Shigenaga, T, Yamane, T, Kanda, T, Ohzeki, T, Ikeda, A, Tsuneoka, T, “Development of High Quality Appearance Basecoat.” Rev. Auto. Eng., 29 97 (2008) Mori, J, Kubota, H, Shigenaga, T, Yamane, T, Kanda, T, Ohzeki, T, Ikeda, A, Tsuneoka, T, “Development of High Quality Appearance Basecoat.” Rev. Auto. Eng., 29 97 (2008)
15.
go back to reference Bird, RB, Armstrong, RC, Hassager, O, Dynamics of Polymeric Liquids: Fluid Mechanics. Wiley, New York (1987) Bird, RB, Armstrong, RC, Hassager, O, Dynamics of Polymeric Liquids: Fluid Mechanics. Wiley, New York (1987)
16.
go back to reference Ellwood, KRJ, The Mechanics and Stability of Liquid Jets and Films. PhD thesis, The University of Michigan (1991) Ellwood, KRJ, The Mechanics and Stability of Liquid Jets and Films. PhD thesis, The University of Michigan (1991)
17.
go back to reference Kistler, SF, Scriven, LE, “Coating Flow Theory by Finite-Element and Asymptotic Analysis of the Navier–Stokes System.” Int. J. Numer. Methods Fluids, 4 207–229 (1984)CrossRef Kistler, SF, Scriven, LE, “Coating Flow Theory by Finite-Element and Asymptotic Analysis of the Navier–Stokes System.” Int. J. Numer. Methods Fluids, 4 207–229 (1984)CrossRef
18.
go back to reference Bauer, D, Briggs, L, “Rheological Models for Predicting Flow in High Solids Coatings.” J. Coat. Technol., 56 (716) 87 (1984) Bauer, D, Briggs, L, “Rheological Models for Predicting Flow in High Solids Coatings.” J. Coat. Technol., 56 (716) 87 (1984)
19.
go back to reference Basu, S, Francis, L, McCormick, A, Scriven, L, “Pattern Generation by Wrinkling in a Two-Layer Coating.” PMSE Preprint, 97 146 (2007) Basu, S, Francis, L, McCormick, A, Scriven, L, “Pattern Generation by Wrinkling in a Two-Layer Coating.” PMSE Preprint, 97 146 (2007)
Metadata
Title
The evolution of surface texture in automotive coatings
Authors
Cindy A. Peters
Mark E. Nichols
Kevin R. J. Ellwood
Publication date
01-07-2011
Publisher
Springer US
Published in
Journal of Coatings Technology and Research / Issue 4/2011
Print ISSN: 1547-0091
Electronic ISSN: 1935-3804
DOI
https://doi.org/10.1007/s11998-011-9333-2

Other articles of this Issue 4/2011

Journal of Coatings Technology and Research 4/2011 Go to the issue

Premium Partners