Skip to main content
Top
Published in: Metallurgical and Materials Transactions B 5/2016

27-07-2016

Thermodynamics Behavior of Germanium During Equilibrium Reactions between FeOx-CaO-SiO2-MgO Slag and Molten Copper

Authors: M. A. H. Shuva, M. A. Rhamdhani, G. A. Brooks, S. Masood, M. A. Reuter

Published in: Metallurgical and Materials Transactions B | Issue 5/2016

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The distribution ratio of germanium (Ge), \( L_{\text{Ge}}^{s/m} \) during equilibrium reactions between magnesia-saturated FeOx-CaO-SiO2 (FCS) slag and molten copper has been measured under oxygen partial pressures from 10−10 to 10−7 atm and at temperatures 1473 to 1623 K (1200 to 1350 °C). It was observed that the Ge distribution ratio increases with increasing oxygen partial pressure, and with decreasing temperature. It was also observed that the distribution ratio is strongly dependent on slag basicity. The distribution ratio was observed to increase with increasing optical basicity. At fixed CaO concentration in the slag, the distribution ratio was found to increase with increasing Fe/SiO2 ratio, tending to a plateau at \( L_{\text{Ge}}^{s/m} \) = 0.8. This behavior is consistent with the assessment of ionic bond fraction carried out in this study, and suggested the acidic nature of germanium oxide (GeO2) in the slag system studied. The characterisation results of the quenched slag suggested that Ge is present in the FeOx-CaO-SiO2-MgO slag predominantly as GeO2. At 1573 K (1300 °C) and \( p_{{{\text{O}}_{2} }} \) = 10−8 atm, the activity coefficient of GeO2 in the slag was calculated to be in the range of 0.24 to 1.50. The results from the current study suggested that less-basic slag, high operating temperature, and low oxygen partial pressure promote a low Ge distribution ratio. These conditions are desired for maximizing Ge recovery, for example, during pyrometallurgical processing of Ge-containing e-waste through secondary copper smelting. Overall, the thermodynamics data generated from this study can be used for process modeling purposes for improving recovery of Ge in primary and secondary copper smelting processes.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference J. Scoyer, G. Helian and H.U. Wolf: Ullmann’s Encyclopaedia of Industrial Chemistry, Wiley-VCH, Weinheim, Germany, 2001, pp. 351–363. J. Scoyer, G. Helian and H.U. Wolf: Ullmann’s Encyclopaedia of Industrial Chemistry, Wiley-VCH, Weinheim, Germany, 2001, pp. 351–363.
3.
go back to reference R. Holl, M. Kling, and E. Schroll: Ore Geology Review, 2007, vol. 30, pp. 145-80.CrossRef R. Holl, M. Kling, and E. Schroll: Ore Geology Review, 2007, vol. 30, pp. 145-80.CrossRef
4.
go back to reference L. Berstein: Geochim. Cosmochim. Acta, 1985, vol. 49 (11), pp. 2409 – 22.CrossRef L. Berstein: Geochim. Cosmochim. Acta, 1985, vol. 49 (11), pp. 2409 – 22.CrossRef
5.
go back to reference D.E. Guberman: USGS Mineral Commodity Profile-Germanium, Open File Report 2004-1218, USGS, 2015. D.E. Guberman: USGS Mineral Commodity Profile-Germanium, Open File Report 2004-1218, USGS, 2015.
6.
go back to reference A. Anindya, D.R. Swinbourne, M.A. Reuter, and R.W. Matusewicz: Miner. Process. Extr. Metall., 2013, vol. 122 (3), pp. 165-73.CrossRef A. Anindya, D.R. Swinbourne, M.A. Reuter, and R.W. Matusewicz: Miner. Process. Extr. Metall., 2013, vol. 122 (3), pp. 165-73.CrossRef
7.
go back to reference A. Anindya, D.R. Swinbourne, M.A. Reuter, and R.W. Matusewicz: Miner. Process. Extr. Metall., 2013, vol. 123(1), pp. 43-52.CrossRef A. Anindya, D.R. Swinbourne, M.A. Reuter, and R.W. Matusewicz: Miner. Process. Extr. Metall., 2013, vol. 123(1), pp. 43-52.CrossRef
8.
go back to reference R. Widmer, H. Oswald-Krapf and D. Sinha-Khetriwal: Environ. Impact Assess. Rev., 2005, vol. 25 (5), pp. 436-58.CrossRef R. Widmer, H. Oswald-Krapf and D. Sinha-Khetriwal: Environ. Impact Assess. Rev., 2005, vol. 25 (5), pp. 436-58.CrossRef
9.
go back to reference M. Reuter and I.V. Kojo: World of Metall-Erzmetall, 2004, 67(1), pp.5–12. M. Reuter and I.V. Kojo: World of Metall-Erzmetall, 2004, 67(1), pp.5–12.
10.
go back to reference E. Worrell and M. Reuter: Handbook of Recycling, 1st Ed., Elseveir, Oxford, UK, 2014, pp. 85-94. E. Worrell and M. Reuter: Handbook of Recycling, 1st Ed., Elseveir, Oxford, UK, 2014, pp. 85-94.
12.
go back to reference A. Khaliq, M.A. Rhamdhani, G.A. Brooks, and S. Masood: Resources, 3(1), 2014, pp.152-179.CrossRef A. Khaliq, M.A. Rhamdhani, G.A. Brooks, and S. Masood: Resources, 3(1), 2014, pp.152-179.CrossRef
13.
go back to reference M.E. Schlesinger, M.J. King, K.C. Sole, W.G. Davenport: Extractive Metallurgy of Copper, 5th Ed, Elsevier, Oxford, UK, 2011. M.E. Schlesinger, M.J. King, K.C. Sole, W.G. Davenport: Extractive Metallurgy of Copper, 5th Ed, Elsevier, Oxford, UK, 2011.
14.
go back to reference C. Hageluken: World of Metall-Erzmetall, 2006, 59(3), pp. 152–61. C. Hageluken: World of Metall-Erzmetall, 2006, 59(3), pp. 152–61.
15.
16.
go back to reference J. Cui and E. Forssberg: J. Hazardous Material, 2003, vol. 99 (3), pp. 243-63.CrossRef J. Cui and E. Forssberg: J. Hazardous Material, 2003, vol. 99 (3), pp. 243-63.CrossRef
17.
go back to reference M.A.H. Shuva, M.A. Rhamdhani, G.A. Brooks, S. Masood and M.A. Reuter: J. Clean. Prod., 2016, vol. 131, pp. 795-809.CrossRef M.A.H. Shuva, M.A. Rhamdhani, G.A. Brooks, S. Masood and M.A. Reuter: J. Clean. Prod., 2016, vol. 131, pp. 795-809.CrossRef
18.
go back to reference Y.S. Han, D.R. Swinbourne and J.H. Park: Metall. Mater. Trans. B, 2015, vol. 46B, pp. 2449-57.CrossRef Y.S. Han, D.R. Swinbourne and J.H. Park: Metall. Mater. Trans. B, 2015, vol. 46B, pp. 2449-57.CrossRef
19.
go back to reference K. Yamaguchi: Proceedings. of Copper 2010, Hamburg, 2010, vol. 3 pp. 1287–95. K. Yamaguchi: Proceedings. of Copper 2010, Hamburg, 2010, vol. 3 pp. 1287–95.
20.
go back to reference H. Heo, S.Park and J.H. Park: Metall. Mater. Trans. B, 2012,vol. 43B, pp. 1098-1105.CrossRef H. Heo, S.Park and J.H. Park: Metall. Mater. Trans. B, 2012,vol. 43B, pp. 1098-1105.CrossRef
21.
go back to reference Y.S. Han and J.H. Park: Metall. Mater. Trans. B, 2015, vol. 46B, pp. 235-242.CrossRef Y.S. Han and J.H. Park: Metall. Mater. Trans. B, 2015, vol. 46B, pp. 235-242.CrossRef
22.
go back to reference M.D. Johnston, S. Jahanshahi, and F.J. Lincoln: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 433-42.CrossRef M.D. Johnston, S. Jahanshahi, and F.J. Lincoln: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 433-42.CrossRef
23.
go back to reference D.R. Swinbourne, G.G. Barbanate and A. Sheeran: Metall. Mater. Trans. B, 1998, vol. 9B, pp. 555-62.CrossRef D.R. Swinbourne, G.G. Barbanate and A. Sheeran: Metall. Mater. Trans. B, 1998, vol. 9B, pp. 555-62.CrossRef
24.
go back to reference T.S. Kho, D.R. Swinbourne and T. Lehner: Metall. Mater. Trans. B,, 2006, vol. 37B, pp. 209-14.CrossRef T.S. Kho, D.R. Swinbourne and T. Lehner: Metall. Mater. Trans. B,, 2006, vol. 37B, pp. 209-14.CrossRef
25.
go back to reference C. Chen and S. Jahanshahi: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 1166-74.CrossRef C. Chen and S. Jahanshahi: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 1166-74.CrossRef
26.
go back to reference L. Paulina, D.R. Swinbourne, and T.S. Kho: Miner. Proces. Extr. Metall., 2013, vol. 122(2), pp. 79-86.CrossRef L. Paulina, D.R. Swinbourne, and T.S. Kho: Miner. Proces. Extr. Metall., 2013, vol. 122(2), pp. 79-86.CrossRef
27.
go back to reference S Yan and D.R. Swinbourne: Miner. Proces. Extr. Metall., 2003, Vol. 112, pp. 75-80.CrossRef S Yan and D.R. Swinbourne: Miner. Proces. Extr. Metall., 2003, Vol. 112, pp. 75-80.CrossRef
28.
go back to reference H.M. Henao, P. Hayes, E. Jak, and G.G. Richard: Proceedings of the Lead-Zinc, Vancouver, Canada (publ.: The Minerals, Metals & Materials Society), 2010, pp. 1145–60. H.M. Henao, P. Hayes, E. Jak, and G.G. Richard: Proceedings of the Lead-Zinc, Vancouver, Canada (publ.: The Minerals, Metals & Materials Society), 2010, pp. 1145–60.
29.
go back to reference R. Hultgren, P.D. Desai, D.T. Hawkins, M. Gleiser, K.K. Kelly, D. Wagram: Selected values of the thermodynamic properties of the elements. American Society for Metals, Metals Park, Ohio, 1973. R. Hultgren, P.D. Desai, D.T. Hawkins, M. Gleiser, K.K. Kelly, D. Wagram: Selected values of the thermodynamic properties of the elements. American Society for Metals, Metals Park, Ohio, 1973.
30.
go back to reference V. Swamy, S.A. Decterov, and A.D. Pelton: Glass Science and Technology, 76 (2), 2003, pp. 62-70. V. Swamy, S.A. Decterov, and A.D. Pelton: Glass Science and Technology, 76 (2), 2003, pp. 62-70.
31.
go back to reference V.I. Davydov: Zh. Neorg. Khimii, 2, 1957, pp.1460-1466. V.I. Davydov: Zh. Neorg. Khimii, 2, 1957, pp.1460-1466.
32.
go back to reference R. Louey, D.R. Swinbourne and T. Lehner: AusIMM Proceedings, 1999, vol. 304(2), pp. 31-36. R. Louey, D.R. Swinbourne and T. Lehner: AusIMM Proceedings, 1999, vol. 304(2), pp. 31-36.
33.
go back to reference A. Yazawa and Y. Takeda: Trans. Jpn Inst. Metal, 1982, vol. 23(6), pp. 328-33.CrossRef A. Yazawa and Y. Takeda: Trans. Jpn Inst. Metal, 1982, vol. 23(6), pp. 328-33.CrossRef
34.
go back to reference F. Kongoli, I. Mcbow, and A. Yazawa: Proceedings of Sohn International Symposium on Advanced Processing of Metals and Materials, Warrendale, PA, 2006, pp. 69–87. F. Kongoli, I. Mcbow, and A. Yazawa: Proceedings of Sohn International Symposium on Advanced Processing of Metals and Materials, Warrendale, PA, 2006, pp. 69–87.
35.
go back to reference A. Yazawa, Y. Takeda, and S. Nakazawa: Proceedings of the Copper 99–Cobre 99, The Metallurgical Society of CIM, Phoenix, AZ, 1999, pp. 587–97. A. Yazawa, Y. Takeda, and S. Nakazawa: Proceedings of the Copper 99–Cobre 99, The Metallurgical Society of CIM, Phoenix, AZ, 1999, pp. 587–97.
36.
go back to reference C.W Bale, E. Besisle, P. Chartrand, S.A. Decterov, G.R. Eriksson, K. Hack, I.H. Jung, Y.B. Kang, J. Melancon, A.D. Pelton, C. Robelin and S. Peterson: CALPHAD, 2009 vol. 33, pp. 295-311.CrossRef C.W Bale, E. Besisle, P. Chartrand, S.A. Decterov, G.R. Eriksson, K. Hack, I.H. Jung, Y.B. Kang, J. Melancon, A.D. Pelton, C. Robelin and S. Peterson: CALPHAD, 2009 vol. 33, pp. 295-311.CrossRef
37.
go back to reference FactSageTM 6.4: www. Factsage.com. Accessed August 2015. FactSageTM 6.4: www. Factsage.com. Accessed August 2015.
38.
go back to reference Y. Takeda, S. Ishiwata, and A. Yazawa: Trans. Jpn Inst. Metal, 1983, vol. 24(7), pp. 518-28.CrossRef Y. Takeda, S. Ishiwata, and A. Yazawa: Trans. Jpn Inst. Metal, 1983, vol. 24(7), pp. 518-28.CrossRef
39.
go back to reference W.X. Yan, D. Lian, D. GuiFang, W. Peng, W. Wei, W. Liduo, and Q. Yong: Chinsese Sci. Bull., 2009, vol., 54, pp. 2810–13. W.X. Yan, D. Lian, D. GuiFang, W. Peng, W. Wei, W. Liduo, and Q. Yong: Chinsese Sci. Bull., 2009, vol., 54, pp. 2810–13.
40.
go back to reference M. Balkanski, M.A. Nusimovici, and J. Reydellet: Solid State Commun., 1969, vol. 7, pp. 815–18.CrossRef M. Balkanski, M.A. Nusimovici, and J. Reydellet: Solid State Commun., 1969, vol. 7, pp. 815–18.CrossRef
41.
go back to reference M. Micoulaut, L. Cormier, and G.S. Henderson: J. Phys. Condens. Matter., 2006, vol. 18, pp. R753-84.CrossRef M. Micoulaut, L. Cormier, and G.S. Henderson: J. Phys. Condens. Matter., 2006, vol. 18, pp. R753-84.CrossRef
43.
go back to reference J.H. Park and D.J. Min: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 689-94.CrossRef J.H. Park and D.J. Min: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 689-94.CrossRef
44.
go back to reference O.M. Sreedharan, E.Athiappan, R. Pankajavalli, and J.B. Gnamoorthy: J. Less-Common Metals, 1979, vol. 68, pp. 143-52.CrossRef O.M. Sreedharan, E.Athiappan, R. Pankajavalli, and J.B. Gnamoorthy: J. Less-Common Metals, 1979, vol. 68, pp. 143-52.CrossRef
45.
go back to reference G. Sodeck, P Entner, and A. Neekel: High Temp. Sci., 1970, vol. 2, pp. 311-21. G. Sodeck, P Entner, and A. Neekel: High Temp. Sci., 1970, vol. 2, pp. 311-21.
46.
go back to reference J. P. Hager, S. M. Howard, and J. H. Jones: Metall. Trans., 1973, vol. 4, pp. 2383-88.CrossRef J. P. Hager, S. M. Howard, and J. H. Jones: Metall. Trans., 1973, vol. 4, pp. 2383-88.CrossRef
47.
go back to reference G.K. Sigworth and J.F. Elliott: Can. Metall. Q., 1974,vol. 13(3), pp. 455-61.CrossRef G.K. Sigworth and J.F. Elliott: Can. Metall. Q., 1974,vol. 13(3), pp. 455-61.CrossRef
48.
49.
go back to reference C.B Alcock, R. Sridhar, and R.C. Svedbergs: J. Chem. Thermodynamics, 1970, vol. 3, pp. 255-63.CrossRef C.B Alcock, R. Sridhar, and R.C. Svedbergs: J. Chem. Thermodynamics, 1970, vol. 3, pp. 255-63.CrossRef
50.
go back to reference J. Wang, S. Jin, C. Leinenbach, and A. Jacot: J. Alloys Compd., 2010, vol. 504, pp. 159-65.CrossRef J. Wang, S. Jin, C. Leinenbach, and A. Jacot: J. Alloys Compd., 2010, vol. 504, pp. 159-65.CrossRef
51.
go back to reference J.A. Duffy and M.D. Ingram: J. Non-Crystal Solids, 1976, vol. 21, pp. 373-410.CrossRef J.A. Duffy and M.D. Ingram: J. Non-Crystal Solids, 1976, vol. 21, pp. 373-410.CrossRef
52.
go back to reference J.A. Duffy and M.D. Ingram: J. Phys. Chem. Glasses, 1975, vol. 16, pp. 119-23. J.A. Duffy and M.D. Ingram: J. Phys. Chem. Glasses, 1975, vol. 16, pp. 119-23.
53.
go back to reference J.A. Duffy, M.D. Ingram, and I.D. Sommerville: J. Chem. Soc. Faraday Trans. I, 1978, vol. 74, pp. 1410-19.CrossRef J.A. Duffy, M.D. Ingram, and I.D. Sommerville: J. Chem. Soc. Faraday Trans. I, 1978, vol. 74, pp. 1410-19.CrossRef
54.
go back to reference J.D. Gilchrist: Extraction Metallurgy, 3rd Ed., Pergamon Press, London, 1989, pp.198-200. J.D. Gilchrist: Extraction Metallurgy, 3rd Ed., Pergamon Press, London, 1989, pp.198-200.
55.
go back to reference D.R. Ride (ed.): Handbook of Chemistry and Physics, 84th Ed., CRC Press, Boca Raton, FL, 2003. Table-12:14-12:15. D.R. Ride (ed.): Handbook of Chemistry and Physics, 84th Ed., CRC Press, Boca Raton, FL, 2003. Table-12:14-12:15.
56.
go back to reference L. Pauling: The nature of the chemical bond and the structure of molecules and crystals, 3rd Ed, Cornell University Press, New York, 1965. L. Pauling: The nature of the chemical bond and the structure of molecules and crystals, 3rd Ed, Cornell University Press, New York, 1965.
Metadata
Title
Thermodynamics Behavior of Germanium During Equilibrium Reactions between FeOx-CaO-SiO2-MgO Slag and Molten Copper
Authors
M. A. H. Shuva
M. A. Rhamdhani
G. A. Brooks
S. Masood
M. A. Reuter
Publication date
27-07-2016
Publisher
Springer US
Published in
Metallurgical and Materials Transactions B / Issue 5/2016
Print ISSN: 1073-5615
Electronic ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-016-0759-x

Other articles of this Issue 5/2016

Metallurgical and Materials Transactions B 5/2016 Go to the issue

Premium Partners