Top

Polymer Science, Series D

Published in:

01-06-2022

Traditions, Current Innovations, Variations, and Deviations in the Control of Welding of Polymer Pipes

Authors: V. I. Kimel’blat, Kh. S. Abzal’dinov

Published in: Polymer Science, Series D | Issue 2/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

At present, in world practice, there is a steady increase in the volume of welding operations with a simultaneous improvement in welding technologies. Along with this, there is a need to improve traditional and develop new methods for quality control of welded joints. The solution of such problems is not possible without the availability of qualified specialists.

previous article Sorption Interactions in the Hydroxyapatite–CuSO4 Aqueous Solution System

next article Influence of Modified Carbon Fillers and Carbon Nanotubes on the Properties of Thermoelastoplastic Materials

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

V. I. Kimel’blat, Butt Welding of Polyethylene Pipes with a Heated Tool: Monograph (Polyplastic Group, Moscow, 2020) [in Russian].

E. V. Danzanova, A. I. Gerasimov, and G. V. Botvin, “Butt welding of polyethylene pipes for gas pipelines with a heated tool,” Svar. Proizvod., No. 3, 43–47 (2016).

M. V. Yurzhenko, “Primary quality control of butt welded joints of polyethylene pipes with a heated tool (a review),” Nauk. Notatki, No. 66, 400–405 (2019).

N. P. Starostin and O. A. Ammosova, “Butt welding of polyethylene pipes with a heated tool at low temperatures,” Neftegaz. Delo 13 (2), 126–139 (2015).

A. I. Gerasimov and E. V. Danzanova, “Welding of polymer thick-walled pipes,” Tendentsii Razvit. Nauki Obraz., No. 45-8, 38–41 (2018). https://doi.org/10.18411/lj-12-2018-174

E. V. Danzanova and A. I. Gerasimov, “Testing of welded joints of polymer pipes,” Nov. Mater. Tekhnol. Mashinostr., No. 30, 27–32 (2019).

V. I. Kimel’blat, Welding with Embedded Heaters in the Construction of Polyethylene Pipelines: Monograph (Polyplastic Group, Moscow, 2020) [in Russian].

V. A. Sokolov and E. A. Bondarenko, “Welding of polyethylene gas pipelines using fittings with embedded heaters,” Omsk. Nauchn. Vestn., No. 1 (77), 43–44 (2009).

A. V. Zhukov, “Physical processes in a fitting during welding with embedded heaters,” Territ. Neftegaz, No. 11, 64–68 (2014).

10.

A. V. Zhukov, “Physical processes in the welding machine during welding with embedded heaters,” Territ. Neftegaz, No. 12, 104–110 (2014).

11.

V. A. Sokolov, Yu. A. Sayapin, and L. A. Shestel’, “Control of welded joints during welding of pipes using embedded heaters,” in Proceedings of the VIII International Scientific-Tehcnical Conf. “Technics and Technologies for Machine Enineering,” Omsk, May 22–25, 2019 (Omsk State Technical Univ., Omsk, 2019), pp. 131–133.

12.

N. P. Starostin, A. I. Gerasimov, E. V. Danzanova, and O. A. Ammosova, RF Patent No. 2744141 (2021).

13.

A. V. Zhukov, I. V. Volkov, and V. I. Kimel’blat, “Technological features of butt welding of pipes from different grades of polyethylene,” Territ. Neftegaz, No. 4, 84–89 (2015).

14.

I. V. Volkov and V. I. Kimel’blat, “The current state and innovations in technology of butt welding of polyethylene pipes with a heated tool,” Vestn. Kazan. Tekhnol. Univ. 17 (16), 175–178 (2014).

15.

“Welding in Russia-2020: current state and prospects,” in Proceedings of the II International Conf. within the IX Eurasian Symp. on Strength and Service Life at Low Climatic Temperature “EURASTRENCOLD-2020,” Dedicated to the 50th Anniversary of Establishment of the Larionov Institute of the Physical-Technical Problems of the North (Siberian Branch, Russian Academy of Sciences), Yakutsk, September 14–17, 2020 (Dani-Almas, Yakutsk, 2020) [in Russian].

16.

Proceedings of the XI International Educational Scientific-Practical Conf. “Pipeline Transport–2016,” Ufa, May 24–25, 2016 (Ufa State Petroleum Technological Univ., Ufa, 2016) [in Russian].

17.

I. K. Garkushin, O. V. Lavrent’eva, M. A. Istomova, and O. Yu. Kalmykova, Building Materials: Composition, Properties, and Application (Samara State Technical Univ., Samara, 2015) [in Russian].

18.

Yu. Yakovlev, “Automation and reliability of data processing is the basis of Georg Fisher devices,” Polim. Truby, No. 1 (63), 62–65 (2019).

19.

A. I. Gerasimov, G. V. Botvin, and E. V. Danzanova, “The strength of a welded joint of polymer pipes,” Arkt. XXI Vek. Tekh. Nauki, No. 1, 64–76 (2013).

20.

V. N. Protasov and D. A. Korobov, “Quality ensurance of internal anti-corrosion insulation of welded joints of steel elements of oilfield pipelines with an internal epoxy coating,” Territ. Neftegaz, No. 12, 48–55 (2018).

21.

GOST (State Standard) 24297–2013: Verification of Purchased Products. Organization and Methods of Control (Standartinform, Moscow, 2014) [in Russian].

22.

“Plastic Pipe Institute warns of supply of low-quality polymer pipes for the oil and gas industry,” Polim. Truby, No. 1 (63), 50–51 (2019).

23.

GOST (State Standard) R 54792–2011: Defects in Thermoplastic Welding Joints. Description and Evaluation (Standartinform, Moscow, 2011) [in Russian].

24.

I. V. Volkov, N. V. Prokop’ev, and V. I. Kimel’blat, “Control of the burr of PE pipe butt joints. 1. Small diameters and thicknesses of pipes,” Polim. Truby, No. 3 (49), 58–63 (2015).

25.

I. V. Volkov, N. V. Prokop’ev, and V. I. Kimel’blat, “Control of the burr of PE pipe butt joints. 2. Medium and large pipes,” Polim. Truby, No. 4 (50), 54–59 (2015).

26.

I. V. Volkov, R. S. Mysyak, and V. I. Kimel’blat, “Visual-measuring control of butt welding with a heated tool: modernization trends,” Remont, Vosstanov., Modernizatsiya, No. 9, 30–34 (2015).

27.

GOST (State Standard) R 55142–2012: Testing of Welded Joints of Thermoplastic Sheets and Pipes. Test Methods (Standartinform, Moscow, 2012) [in Russian].

28.

I. V. Volkov, A. N. Sen’kovskii, N. V. Prokop’ev, V. I. Kimel’blat, and A. N. Kryuchkov, “Tensile testing of butt welded joins of PE pipes,” Polim. Truby, No. 3 (53), 60–65 (2016).

29.

V. I. Kimel’blat and I. V. Volkov, “Variations of the properties of polyethylenes and butt welding technologies for polyethylene pipes,” Remont, Vosstanov., Modernizatsiya, No. 4, 24–29 (2015).

30.

I. V. Volkov, V. V. Glukhov, A. B. Kamalov, and V. I. Kimel’blat, “Relationship between the weldability indices of PE 100 and its macromolecular structure,” Vestn. Kazan. Tekhnol. Univ., No. 10, 600–602 (2010).

Title: Traditions, Current Innovations, Variations, and Deviations in the Control of Welding of Polymer Pipes
Authors: V. I. Kimel’blat
Kh. S. Abzal’dinov
Publication date: 01-06-2022
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 2/2022
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421222020095

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2022

The Effect of Multiple Curing on the Characteristics of an Epoxy Matrix and Its Adhesion to Fibers

Features of Gluing a Wood–Polymer Material

Sorption Interactions in the Hydroxyapatite–CuSO4 Aqueous Solution System

Evaluation of the Stress–Strain State of a Polymer Composition Material with a Hybrid Matrix

Polyorganosiloxane Block Copolymers of Linear-Ladder Structure Intended for Obtaining Heat-Resistant Protective Coatings

Studying Low-Temperature Properties of Bitumen Materials

Premium Partners