Top

Journal of Materials Engineering and Performance

Published in:

12-01-2023 | Technical Article

Two-Way Shape Memory Effect and Viscoelastic Properties in NiTiHf Polycrystals Containing Nanosized Particles

Authors: A. I. Tagiltsev, E. Y. Panchenko, Y. I. Chumlyakov, E. E. Timofeeva, E. S. Marchenko

Published in: Journal of Materials Engineering and Performance | Issue 21/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The effect of stress-induced martensite aging on the microstructure, viscoelastic properties, and one-way and two-way shape memory effect in high-temperature Ni_50.2Ti_37.3Hf_12.5 aged polycrystals in tension was investigated. Stress-induced martensite aging for 6 h resulted in significant changes in the viscoelastic properties of the polycrystals. The elastic module of the martensite and austenite increased (by a factor of two), and a large softening of the elastic module and the growth of internal friction by 30% during MT was observed. Aging in martensite leads to the induction of a two-way shape memory effect with a strain of 1.7%, whose degradation is related to the microstructural change. It is established that both the value and the stability of the high-temperature two-way shape memory effect are defined by the time of the stress-induced martensite aging and the maximum value and stability were observed at an aging time of 6 h.

previous article Performance of ZnO-Incorporated Hydroxyapatite/Polymethyl Methacrylate Tri-Component Composite Bone Scaffolds Fabricated from Varying Sources of Hydroxyapatite

next article In-Situ Electron Backscatter Diffraction Study of Deformation Behavior of Fine-grained Dual Phase Steel Subjected to Uniaxial Tension

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

H.E. Karaca, S.M. Saghaian, G. Ded, H. Tobe, B. Basaran, H.J. Maier, R.D. Noebe, and Y.I. Chumlyakov, Effects of Nanoprecipitation on the Shape Memory and Material Properties of an Ni-Rich NiTiHf High Temperature Shape Memory Alloy, Acta Mater., 2013, 61(19), p 7422–7431. https://doi.org/10.1016/j.actamat.2013.08.048CrossRef

J. Ma, I. Karaman, and R.D. Noebe, High Temperature Shape Memory Alloys, Int. Mater. Rev., 2010, 55(5), p 257–315. https://doi.org/10.1179/095066010X12646898728363CrossRef

C. Hayrettin, O. Karakoc, I. Karaman, J.H. Mabe, R. Santamarta, and J. Pons, Two Way Shape Memory Effect in NiTiHf High Temperature Shape Memory Alloy Tubes, Acta Mater., 2019, 163(5), p 1–13. https://doi.org/10.1016/j.actamat.2018.09.058CrossRef

K. Otsuka and X. Ren, Mechanism of Martensite Aging Effects and New Aspects, Mater. Sci. Eng. A, 2001, 312, p 207–218. https://doi.org/10.1016/S0921-5093(00)01877-3CrossRef

E.E. Timofeeva, E.Y. Panchenko, M.V. Pichkaleva, A.I. Tagiltsev, and Y.I. Chumlyakov, The Effect of Stress-Induced Martensite Ageing on the Two-Way Shape Memory Effect in Ni₅₃Mn₂₅Ga₂₂ single crystals, Mater Lett, 2018, 228, p 490–492. https://doi.org/10.1016/j.matlet.2018.06.086CrossRef

K. Tsuchiya, K. Tateyama, K. Sugino, and K. Marukawa, Effect of Aging on the Rubber-Like Behavior in Cu-Zn-Al Martensites, Scripta Metal. et Mater., 1995, 32(2), p 259–264.CrossRef

S. Kustov, J. Pons, E. Cesari, and J. van Humbeeck, Chemical and Mechanical Stabilization of Martensite, Acta Mater., 2004, 52(15), p 4547–4559. https://doi.org/10.1016/j.actamat.2004.06.012CrossRef

E. Panchenko, A. Eftifeeva, Y. Chumlyakov, G. Gerstein, and H.J. Maier, Two-Way Shape Memory Effect and Thermal Cycling Stability in Co₃₅Ni₃₅Al₃₀ Single Crystals by Low-Temperature Martensite Ageing, Scripta Mater., 2018, 150, p 18–21. https://doi.org/10.1016/j.scriptamat.2018.02.013CrossRef

K.C. Atli, I. Karaman, R.D. Noebe, G. Bigelow, and D. Gaydosh, Work Production Using the Two-Way Shape Memory Effect in NiTi and a Ni-rich NiTiHf High-Temperature Shape Memory Alloy, Smart Mater. Struct., 2015, 24(12), p 125023. https://doi.org/10.1088/0964-1726/24/12/125023CrossRef

10.

A.I. Tagiltsev, EYu. Panchenko, Yu.I. Chumlyakov, I.D. Fatkullin, and I. Karaman, Two-Way Shape Memory effect in Stress-Induced Martensite Aged Ni_50.3Ti_32.2Hf1_7.5 alloy, Mater. Lett., 2020, 268, p 127589. https://doi.org/10.1016/j.matlet.2020.127589CrossRef

11.

A.I. Tagiltsev, NYu. Surikov, EYu. Panchenko, Yu.I. Chumlyakov, and I. Karaman, Special Features of Functional Properties of Heterophase High-Strength Ni_50.2Ti_37.3Hf1_2.5 Polycrystals and Single Crystals, Russ. Phys. J., 2019, 62(3), p 534–540. https://doi.org/10.1007/s11182-019-01742-8CrossRef

12.

S.M. Saghaian, H.E. Karaca, M. Souri, A.S. Turabi, and R.D. Noebe, Tensile Shape Memory Behavior of Ni_50.3Ti_29.7Hf₂₀ high temperature shape memory alloys, Mater. Des., 2016, 101, p 340–345. https://doi.org/10.1016/j.matdes.2016.03.163CrossRef

13.

R. Santamarta, R. Arróyave, J. Pons, A. Evirgen, I. Karaman, H.E. Karaca, and R.D. Noebe, TEM Study of Structural and Microstructural Characteristics of a Precipitate Phase in Ni-Rich Ni–Ti–Hf and Ni–Ti–Zr Shape Memory Alloys, Acta Mater., 2013, 61(16), p 6191–6206. https://doi.org/10.1016/j.actamat.2013.06.057CrossRef

14.

A. Shuitcev, L. Li, G.V. Markova, I.S. Golovin, and Y.X. Tong, Internal Friction in Ti_29.7Ni_50.3Hf₂₀ Alloy with High Temperature Shape Memory Effect, Mater. Lett., 2020, 262, p 127025. https://doi.org/10.1016/j.matlet.2019.127025CrossRef

15.

A.I. Tagiltsev, E. Yu Panchenko, E.E. Timofeeva, Yu.I. Chumlyakov, I.D. Fatkullin, E.S. Marchenko, and I. Karaman, The Effect of Stress-Induced Martensite Aging in Tension and Compression on B2–B19′ Martensitic Transformation in Ni_50.3Ti_32.2Hf_17.5 High-Temperature Shape Memory Alloy, Smart Mater. Struct., 2021, 30(2), p 025039. https://doi.org/10.1088/1361-665X/abdaa8CrossRef

16.

A. Eftifeeva, E. Panchenko, Y. Chumlyakov, E. Yanushonite, G. Gerstein, and H.J. Maier, On the High Cyclic Stability of the Tensile Two-Way Shape Memory Effect in Stress-Induced Martensite Aged Co₃₅Ni₃₅Al₃₀ Single Crystals, Mater. Sci. Eng. A, 2021, 799(3), p 140166. https://doi.org/10.1016/j.msea.2020.140166CrossRef

17.

E.Y. Panchenko, E.E. Timofeeva, N.G. Larchenkova, Y.I. Chumlyakov, A.I. Tagiltsev, H.J. Maier, and G. Gerstein, Two-Way Shape Memory Effect Under Multi-Cycles in [001]-Oriented Ni₄₉Fe₁₈Ga₂₇Co₆ single crystal, Mater. Sci. Eng. A, 2017, 706(12), p 95–103. https://doi.org/10.1016/j.msea.2017.08.108CrossRef

Title: Two-Way Shape Memory Effect and Viscoelastic Properties in NiTiHf Polycrystals Containing Nanosized Particles
Authors: A. I. Tagiltsev
E. Y. Panchenko
Y. I. Chumlyakov
E. E. Timofeeva
E. S. Marchenko
Publication date: 12-01-2023
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 21/2023
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-023-07812-w

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 21/2023

Correlation of Alpha Phase and Its Texture Stability in Heat-Treated Ti-6.5%Al-4.4%V-0.15%Fe Alloy

Evaluation of Different Sintering Agents for Binder Jetting of Aluminum Alloy

Organo-Cerium as a Quick Repair Agent for Coating Damage on Carbon Steel

Improving the Surface Performance of Discarded AISI T1 Steel by Cathodic Reduction and Thermal Diffusion-Based Boriding

Laser In Situ Synthesis and Computational Thermal Analysis of Ti-Al-xCr Alloys: Microhardness, Electrochemical Behavior and Tribological Properties

Anticorrosive Property of Aluminum Chloride Nanoparticles on Microbial-Induced Corrosion on Aluminum Workpiece

Premium Partners