Top

Meccanica

Published in:

13-06-2016

Ultrasound influence on the erosive capacity at the electrodischarge processing with ultrasonic activated wire electrode in a single point

Author: Viorel-Mihai Nani

Published in: Meccanica | Issue 6/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Paper presents results of experimental research for the electricaldischarge processing machines efficiency improvement, machines which are using as electrode a wire, abbreviated W-EDM. These machines were equipped with special devices for the ultrasonic activation of the wire electrode. It was noticed that the introduced ultrasound influenced the erosive capacity of the machining process. The paper presents in graphical and tabular forms, the variation of erosive capacity due to the way how the ultrasonical activation of the wire electrode is produced: into the fixed or mobile arm (two subassemblies of the W-EDM machine), after a direction parallel or perpendicular to the direction of the working advance.

previous article Exact solution for axial and transverse dynamic response of functionally graded nanobeam under moving constant load based on nonlocal elasticity theory

next article The limb deformation of the compound bow

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Agarval S, Rao PV (2008) Experimental investigation of surface/subsurface damage formation and material removal mechanisms in SIC grinding. Int J Mach Tools Manuf 48(6):698–710CrossRef

Cetin S, Okada A, Uno Y (2004) Effect of debris accumulation on machining speed in EDM. Int J Electr Mach 9:9–14

Chen Z, Huang Y, Huang H, Zhang Z, Zhang G (2015) Three-dimensional characteristics analysis of the wire-tool vibration considering spatial temperature field and electromagnetic field in WEDM. Int J Mach Tools Manuf 92:85–96CrossRef

Chinmaya PM, Sahu J, Mahapatra SS (2013) Thermal–structural analysis of electrical discharge machining process. Proc Eng 51:508–513CrossRef

Chinmaya PM, Siba SM, Manas RS (2014) A particle swarm approach for multi-objective optimization of electrical discharge machining process. J Intell Manuf 1–20. doi:10.1007/s10845-014-0942-3

Hayakawa S, Sasaki Y, Itoigawa F, Nakamura T (2013) Relationship between occurence of material removal and bubble expansion in electrical discharge machining. Proc CIRP 6:174–179CrossRef

Inoue K (1979) Procédé et dispositif pour le traitement par érosion électrique avec électrode filiforme vibrant, Brevet France, no 2 350 919/07.10.1979

Ikeda M (1972) The movement of a bubble in the gap depending on the single electrical discharge (first report). J Jpn Electr Mach Eng 6(11):12–26

Jun Q, Fei Y, Jun W, Bert L, Dominiek R (2015) Material removal mechanism in low-energy micro-EDM process. CIRP Ann Manuf Technol 64:225–228CrossRef

10.

Kazanţev VA, Rosenberg LD (1965) The mechanism of ultrasonic cutting. Ultrasonics 3, SUA

11.

Kitamura T, Kunieda M (2014) Clarification of EDM gap phenomena using transparent electrodes. CIRP Ann 63(1):213–216CrossRef

12.

Loeb LB, Meek JM (2012) The mechanism of the electric sparks (inc. Retrived). Wiley, Bucuresti

13.

Mironoff NL (1970) Introduction in electrodischarge study. Publishing Micro Technical, Switzerland

14.

Mironoff NL (1977) Thermal effects of erosive pulses, ISEM 5, Wolfsberg

15.

Miţkevici MK (1966) Ob elektroerozionnom effekte na vibrinuişcih elektrodah, Fiziceskie osnovi elektroiskrovoi obrabotki materiallov, Editura Nauka, Moscova

16.

Murti VSR, Philip PK (1987) An analysis of the debris in ultrasonic-assisted electrical discharge machining. Wear 117:241–250CrossRef

17.

Nani VM (1992) Activation ultrasonic methods of wire electrode used in electrodischarge processing. Copybook for Acoustics, Romanian Academy Publishing, no 28, 41–44

18.

Nani VM (2015) Ultrasonic activation of the wire electrode on EDM processing machine. LAP Lambert Academic Publishing, Germany

19.

Nanu A, Nanu D (1981) Dimensional processing by electrical erosion in magnetic field. Facla Publishing, Timisoara

20.

Nichici AL, Popovici V, Nica M, Achimescu N, Popa H, Paulescu GH (1983) Processing by erosion in machine building. Facla Publishing, Timisoara

21.

Okada A, Uno Y, Nakazawa M, Yamauchi T (2010) Evaluation of spark distribution and wire vibration in wire EDM by high-speed observation. CIRP Ann 59(1):231–234CrossRef

22.

Savii GH, Nani VM, Militaru C, Muntean N (1988) Method and device for ultrasonic activation wire electrode. Romanian Patent, no 102596/12.12.1988

23.

Savii GH, Nani VM, Militaru C, Muntean N (1989) Contributions on ultrasound activation of wire-cut electric discharge processing, ISEM 9, Nagoya

24.

Silaş Gh, Rădoi M, Brîndeu L, Klepp M, Hegedus A (1973) Collection of problems for mechanical vibrations. Technical Publishing House, Bucharest

25.

SC STIMEL SATimisoara Company, Romanian (2002) Electrodischarge processing machine with wire electrode and numerical command by type ELEROFIL-10, Technical Paper

26.

Tomura S, Kunleda M (2009) Analysis of electromagnetic force in wire-EDM. Precis Eng 33(3):255–262CrossRef

27.

Yamada H, Mohri N, Saito N, Magara T, Furutani K (1997) Modal analysis of wire electrode vibration in wire-EDM. Int J Electr Mach 2:19–24

28.

Wong Y, Rahman M, Lim H, Han H, Ravi N (2003) Investigation of micro-EDM material removal characteristics using RC-pulse discharges. J Mater Process Technol 140(1–3):303–307CrossRef

Title: Ultrasound influence on the erosive capacity at the electrodischarge processing with ultrasonic activated wire electrode in a single point
Author: Viorel-Mihai Nani
Publication date: 13-06-2016
Publisher: Springer Netherlands
Published in: Meccanica / Issue 6/2017
Print ISSN: 0025-6455
Electronic ISSN: 1572-9648
DOI: https://doi.org/10.1007/s11012-016-0467-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 6/2017

Kirchhoff’s equations for the rigid body motion revisited

Free vibration of carbon nanotube reinforced composite plate on point Supports using Lagrangian multipliers

Surface free energy effects on the postbuckling behavior of cylindrical shear deformable nanoshells under combined axial and radial compressions

Surface effect on the biaxial buckling and free vibration of FGM nanoplate embedded in visco-Pasternak standard linear solid-type of foundation

Virtual displacements principle, existence and uniqueness for elastic no tension bodies

Comments on “Combined effect of variable viscosity and thermal conductivity on free convection flow of a viscous fluid in a vertical channel using DTM” by J.C. Umavathi and M. Shekar

Premium Partners