Top

Journal of Materials Engineering and Performance

Published in:

27-01-2020

Uncertainties in Finite Element Analysis of Yield Point Phenomena in Advanced High-Strength Steel Spot Welds

Authors: H. Rezayat, H. Ghassemi-Armaki, S. P. Bhat, S. Sriram, S. S. Babu

Published in: Journal of Materials Engineering and Performance | Issue 2/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Effects of local plastic instabilities in the form of yield point phenomena (YPP) were investigated on local and global deformation and failure behavior of resistance spot-welded tension–shear (TS) samples made from M1700 advanced high-strength steel (AHSS) by means of finite element (FE) simulations. Material models with and without YPP were used in FE simulations, and sensitivity of results to YPP material model characteristics and failure criteria was investigated. Results from FE simulations revealed several stages of load oscillations in predicted global load–displacement curves with different amplitudes depending on material model with YPP. Results also showed the existence of heterogeneous distribution of equivalent stress in heat-affected zone (HAZ) of TS samples with strong sensitivity to the upper and the lower yield stress values in YPP material model. A stress-based failure criterion was added to the damage model to account for this stress heterogeneity, and results from this model showed that the loading and failure behavior of TS sample can significantly change from ductile to premature semi-brittle failure with significant reduction in strength of TS sample. Results from FE simulations were also compared with those from TS experiments and indicated the need for development of proper material and damage models suitable for materials with YPP.

previous article Identification of Multiple Parameters of the Bammann–Chiesa–Johnson Constitutive Model with Comprehensive Experiments for Pure Aluminum

next article Development of Uncoupled Anisotropic Ductile Fracture Criteria

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

H. Ghassemi-Armaki, E. Biro, and S. Sadagopan, Advanced Characterization of HAZ Softening of AHSS for Crash Modeling, ISIJ Int., 2017, 57(8), p 1451–1460CrossRef

H. Rezayat et al., Constitutive Properties and Plastic Instabilities in the Heat-Affected Zones of Advanced High-Strength Steel Spot Welds, J. Mater. Sci., 2019, 54, p 5825–5843CrossRef

G.T. Hahn, Model for Yielding with Special Reference to Yield-Point Phenomena of Iron and Related Bcc Metals, Acta Metall., 1962, 10, p 727–738CrossRef

T.L. Russell, D.S. Wood, and D.S. Clark, The Influence of Grain Size on the Yield Phenomenon in Steel, Acta Metall., 1961, 9(12), p 1054–1063CrossRef

J. Winlock, The Influence of the Rate of Deformation on the Tensile Properties of Some Plain Carbon Sheet Steels, Trans. Am. Inst. Min. Metall. Eng., 1953, 197(6), p 797–803

A.H. Cottrell and B.A. Bilby, Dislocation Theory of Yielding and Strain Ageing of Iron, Proc. Phys. Soc. Lond. Sect. A, 1949, 62(349), p 49–62CrossRef

H. Conrad and G. Schoeck, Cottrell Locking and the Flow Stress in Iron, Acta Metall., 1960, 8(11), p 791–796CrossRef

J.F. Hallai and S. Kyriakides, Underlying Material Response for Lüders-Like Instabilities, Int. J. Plast., 2013, 47, p 1–12CrossRef

D. Johnson, M. Edwards, and P. Chard-Tuckey, Microstructural Effects on the Magnitude of Lüders Strains in a Low Alloy Steel, Mater. Sci. Eng. A, 2015, 625, p 36–45CrossRef

10.

E. Hall, Yield Point Phenomena in Metals and Alloys, Springer, Berlin, 2012

11.

G.T. Hahn, A Model for Yielding with Special Reference to the Yield-Point Phenomena of Iron and Related bcc Metals, Acta Metall., 1962, 10(8), p 727–738CrossRef

12.

R. Schwab and V. Ruff, On the nature of the yield point phenomenon, Acta Mater., 2013, 61(5), p 1798–1808CrossRef

13.

G. Van Rooyen, The Stress and Strain Distribution in a Propagating Lüders Front Accompanying the Yield-Point Phenomenon in Iron, Mater. Sci. Eng., 1968, 3(2), p 105–117CrossRef

14.

F. Yoshida, Y. Kaneda, and S. Yamamoto, A Plasticity Model Describing Yield-Point Phenomena of Steels and Its Application to FE Simulation of Temper Rolling, Int. J. Plast., 2008, 24(10), p 1792–1818CrossRef

15.

M. Maziere and S. Forest, Strain Gradient Plasticity Modeling and Finite Element Simulation of Lüders Band Formation and Propagation, Contin. Mech. Thermodyn., 2015, 27(1-2), p 83–104CrossRef

16.

J.F. Hallai and S. Kyriakides, On the Effect of Lüders Bands on the Bending of Steel Tubes. Part II: Analysis, Int. J. Solids Struct., 2011, 48(24), p 3285–3298CrossRef

17.

J.F. Hallai and S. Kyriakides, Bending Capacity of Tubes with Lüders Bands: Influence of Geometric and Material Parameters, Proceedings of the Asme 31st International Conference on Ocean, Offshore and Artic Engineering, Vol 3, 2012, p 507–512

18.

H. Rezayat, S.S. Babu, H. Ghassemi-Armaki, Effects of Heat Affected Zone Softening Extent on Strength of Advanced High Strength Steels Resistance Spot Weld, Trends in Welding Research, Proceedings of the 10th International Conference, 2016, Tokyo, Japan

19.

M. Smith, ABAQUS (2011) ‘ABAQUS Documentation’, Dassault Systèmes, Providence, RI, USA

20.

Abaqus Unified FEA - SIMULIA™ by Dassault Systèmes^®. 2017; https://www.3ds.com/products-services/simulia/products/abaqus/

21.

R. Camsonne et al., C-11 Labeling of Pk11195 and Visualization of Peripheral Receptors of Benzodiazepines by Positron-Emission Tomography, Journal De Pharmacologie, 1986, 17(3), p 383–383

22.

H.G. Koenigsberger, Philip-Ii of Spain—Pierson P, Am. Hist. Rev., 1977, 82(4), p 946–948CrossRef

23.

T.J.R. Hughes, The Finite Element Method: Linear Static and Dynamic Finite Element Analysis, Dover Publications, Mineola, 2012

24.

J.S. Sun, K.H. Lee, and H.P. Lee, Comparison of Implicit and Explicit Finite Element Methods for Dynamic Problems, J. Mater. Process. Technol., 2000, 105(1), p 110–118CrossRef

25.

A.M. Prior, Applications of Implicit and Explicit Finite-Element Techniques to Metal-Forming, J. Mater. Process. Technol., 1994, 45(1-4), p 649–656CrossRef

26.

X. Hu et al., Comparison of Explicit and Implicit Finite Element Methods in the Quasistatic Simulation of Uniaxial Tension, Commun. Numer. Methods Eng., 1994, 10(12), p 993–1003CrossRef

27.

AWS D8.9M, Test methods for evaluating the resistance spot welding behavior of automotive sheet steel materials, 3rd ed., American Welding Society (AWS), Miami, 2012

28.

M.M. Bouzekri et al., An Investigation of Failure Types in High-Strength Steel Resistance Spot Welds, Weld. World, 2010, 54(3-4), p 3–14CrossRef

29.

S. Dancette et al., Experimental and Modeling Investigation of the Failure Resistance of Advanced High Strength Steels Spot Welds, Eng. Fract. Mech., 2011, 78(10), p 2259–2272CrossRef

30.

S. Dancette et al., Investigation of the Tensile Shear fracture of Advanced High Strength Steel Spot Welds, Eng. Fail. Anal., 2012, 25, p 112–122CrossRef

31.

Y.P. Yang et al., Integrated Computational Model to Predict Mechanical Behaviour of Spot Weld, Sci. Technol. Weld. Join., 2008, 13(3), p 232–239CrossRef

32.

M.R. Wenman and P.R. Chard-Tuckey, Modelling and Experimental Characterisation of the Lüders Strain in Complex Loaded Ferritic Steel Compact Tension Specimens, Int. J. Plast., 2010, 26(7), p 1013–1028CrossRef

Title: Uncertainties in Finite Element Analysis of Yield Point Phenomena in Advanced High-Strength Steel Spot Welds
Authors: H. Rezayat
H. Ghassemi-Armaki
S. P. Bhat
S. Sriram
S. S. Babu
Publication date: 27-01-2020
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 2/2020
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-04593-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2020

Microstructures and Properties of Graphite Nanoflake/6061Al Matrix Composites Fabricated via Spark Plasma Sintering

Microstructure Evolution and Mechanical Properties of Ti-6Al-4V Alloy Prepared by Multipass Equal Channel Angular Pressing

Study on the Microstructure and Alternating Current Corrosion Behavior of SAF2507 Super-Duplex Stainless Steel in 3.5%NaCl Solution

Studies on Creep and Wear Behavior of Mo-40Ti-10Si Alloy Prepared by Hot Pressing

Determination of Hot Extrusion Parameters in a Spray-Formed Ultrahigh-Strength Aluminum Alloy

Effects of Annealing on Mechanical and Corrosion Properties of As-Extruded NQZ310K Alloy

Premium Partners