Top

Journal of Intelligent Manufacturing

Published in:

05-09-2022

Unified discriminant manifold learning for rotating machinery fault diagnosis

Authors: Changyuan Yang, Sai Ma, Qinkai Han

Published in: Journal of Intelligent Manufacturing | Issue 8/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Fault diagnosis is an important technology for performing intelligent manufacturing. To simultaneously maintain high manufacturing quality and low failure rate for manufacturing systems, it is of great value to accurately locate the fault element, evaluate the fault severity and find the fault root cause. In order to effectively and accurately perform fault diagnosis for rotating machinery, a novel feature selection method named unified discriminant manifold learning (UDML) is proposed in this research. To be specific, the local linear relationship, the distance between adjacent points, the intra-class and inter-class variance are unified in UDML. Based on these, the local structure, global information and label information of high-dimensional features are effectively preserved by UDML. Through this dimension reduction method, homogeneous features become more concentrated while heterogeneous features become more distant. Consequently, mechanical faults could be diagnosed accurately with the help of proposed UDML. More importantly, local linear embedding algorithm, locality preserving projections algorithm, and linear discriminant analysis algorithm could be regarded as a special form of UDML. Moreover, a novel weighted neighborhood graph is constructed to effectively reduce the interference of outliers and noise. The corresponding model parameters are dynamically adjusted by the gray wolf optimization algorithm to find a subspace that discovers the intrinsic manifold structure for classification tasks. Based on the above innovations, a fault diagnosis method for rotating machinery is proposed. Through experimental verifications and comparisons with several classical feature selection algorithms, rotating machinery fault diagnosis can be more accurately performed by the proposed method.

previous article SPECTRE: a deep learning network for posture recognition in manufacturing

next article A novel feature-fusion-based end-to-end approach for remaining useful life prediction

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Alavi, H., Ohadi, A., & Niaki, S. T. (2022). A novel targeted method of informative frequency band selection based on lagged information for diagnosis of gearbox single and compound faults. Mechanical Systems and Signal Processing, 170, 108828. https://doi.org/10.1016/j.ymssp.2022.108828CrossRef

Al-Bugharbee, H., & Trendafilova, I. (2016). A fault diagnosis methodology for rolling element bearings based on advanced signal pretreatment and autoregressive modelling. Journal of Sound and Vibration, 369, 246–265. https://doi.org/10.1016/j.jsv.2015.12.052CrossRef

Anowar, F., Sadaoui, S., & Selim, B. (2021). Conceptual and empirical comparison of dimensionality reduction algorithms (PCA, KPCA, LDA, MDS, SVD, LLE, ISOMAP, LE, ICA, t-SNE). Computer Science Review, 40, 100378. https://doi.org/10.1016/j.cosrev.2021.100378CrossRef

Bustillo, A., Reis, R., Machado, A. R., & Pimenov, D. (2022). Improving the accuracy of machine-learning models with data from machine test repetitions. Journal of Intelligent Manufacturing, 33, 203–221. https://doi.org/10.1007/s10845-020-01661-3CrossRef

Cao, P., Zhang, S., & Tang, J. (2018). Gear fault data. Figshare. https://doi.org/10.6084/m9.figshare.6127874.v1

Ding, H., Gao, R. X., Isaksson, A. J., Landers, R. G., Parisini, T., & Yuan, Y. (2020). State of AI-based monitoring in smart manufacturing and introduction to focused section. IEEE/ASME Transactions on Mechatronics, 25(5), 2143–2154. https://doi.org/10.1109/TMECH.2020.3022983CrossRef

Ding, X., & He, Q. (2016). Time–frequency manifold sparse reconstruction: A novel method for bearing fault feature extraction. Mechanical Systems and Signal Processing, 80, 392–413. https://doi.org/10.1016/j.ymssp.2016.04.024CrossRef

Gilles, J. (2013). Empirical wavelet transform. IEEE Transactions on Signal Processing, 61(16), 3999–4010. https://doi.org/10.1109/TSP.2013.2265222CrossRef

He, X., Yan, S., Hu, Y., Niyogi, P., & Zhang, H. (2005). Face recognition using Laplacianfaces. IEEE Transactions on Pattern Analysis and Machine Intelligence, 27(3), 328–340. https://doi.org/10.1109/TPAMI.2005.55CrossRef

Hoang, D. T., & Kang, H. J. (2020). A motor current signal-based bearing fault diagnosis using deep learning and information fusion. IEEE Transactions on Instrumentation and Measurement, 69(6), 3325–3333. https://doi.org/10.1109/TIM.2019.2933119CrossRef

Kumar, A., & Kumar, R. (2016). Manifold learning using linear local tangent space alignment (LLTSA) algorithm for noise removal in wavelet filtered vibration signal. Journal of Nondestructive Evaluation, 35, 50. https://doi.org/10.1007/s10921-016-0366-4CrossRef

Lee, W. J., Mendis, G. P., Triebe, M. J., & Sutherland, J. W. (2020). Monitoring of a machining process using kernel principal component analysis and kernel density estimation. Journal of Intelligent Manufacturing, 31, 1175–1189. https://doi.org/10.1007/s10845-019-01504-wCrossRef

Lessmeier, C., Kimotho, J. K., Zimmer, D., & Sextro, W. (2016). Condition monitoring of bearing damage in electromechanical drive systems by using motor current signals of electric motors: A benchmark data set for data-driven classification. In 3rd European Conference of the Prognostics and Health Management Society (pp. 1–17).

Li, B., & Zhang, Y. (2011). Supervised locally linear embedding projection (SLLEP) for machinery fault diagnosis. Mechanical Systems and Signal Processing, 25(8), 3125–3134. https://doi.org/10.1016/j.ymssp.2011.05.001CrossRef

Li, B., Zheng, C., & Huang, D. (2008). Locally linear discriminant embedding: An efficient method for face recognition. Pattern Recognition, 41(12), 3813–3821. https://doi.org/10.1016/j.patcog.2008.05.027CrossRef

Li, F., Wang, J., Chyu, M. K., & Tang, B. (2015). Weak fault diagnosis of rotating machinery based on feature reduction with Supervised Orthogonal Local Fisher Discriminant Analysis. Neurocomputing, 168, 505–519. https://doi.org/10.1016/j.neucom.2015.05.076CrossRef

Li, H., Jiang, T., & Zhang, K. (2006). Efficient and robust feature extraction by maximum margin criterion. IEEE Transactions on Neural Networks, 17(1), 157–165. https://doi.org/10.1109/TNN.2005.860852CrossRef

Li, W., Peng, M., Liu, Y., Jiang, N., Wang, H., & Duan, Z. (2018). Fault detection, identification and reconstruction of sensors in nuclear power plant with optimized PCA method. Annals of Nuclear Energy, 113, 105–117. https://doi.org/10.1016/j.anucene.2017.11.009CrossRef

Li, Y., Wang, S., Li, N., & Deng, Z. (2022). Multiscale symbolic diversity entropy: a novel measurement approach for time-series analysis and its application in fault diagnosis of planetary gearboxes. IEEE Transactions on Industrial Informatics, 18(2), 1121–1131. https://doi.org/10.1109/TII.2021.3082517CrossRef

Liu, Y., Hu, Z., & Zhang, Y. (2021). Bearing feature extraction using multi-structure locally linear embedding. Neurocomputing, 428, 280–290. https://doi.org/10.1016/j.neucom.2020.11.048CrossRef

Ma, S., Chu, F., & Han, Q. (2019). Deep residual learning with demodulated time-frequency features for fault diagnosis of planetary gearbox under nonstationary running conditions. Mechanical Systems and Signal Processing, 127, 190–201. https://doi.org/10.1016/j.ymssp.2019.02.055CrossRef

Medina, R., Macancela, J. C., Lucero, P., Cabrera, D., Sánchez, R., & Cerrada, M. (2022). Gear and bearing fault classification under different load and speed by using Poincaré plot features and SVM. Journal of Intelligent Manufacturing, 33, 1031–1055. https://doi.org/10.1007/s10845-020-01712-9CrossRef

Mirjalili, S., Mirjalili, S. M., & Lewis, A. (2014). Grey wolf optimizer. Advances in Engineering Software, 69, 46–61. https://doi.org/10.1016/j.advengsoft.2013.12.007CrossRef

Moehrmann, J., Burkovski, A., Baranovskiy, E., Heinze, GA., Rapoport, A., Heidemann, G. (2011). A discussion on visual interactive data exploration using self-organizing maps. In Laaksonen, J., Honkela, T. (Eds.), Advances in self-organizing maps (pp. 178–187). Springer, Berlin. https://doi.org/10.1007/978-3-642-21566-7_18.

Nieh, E. H., Schottdorf, M., Freeman, N. W., Low, R. J., Lewallen, S., Koay, S. A., Pinto, L., Gauthier, J. L., Brody, C. D., & Tank, D. W. (2021). Geometry of abstract learned knowledge in the hippocampus. Nature, 595(7865), 80–84. https://doi.org/10.1038/s41586-021-03652-7CrossRef

Pang, S., Yang, X., Zhang, X., & Lin, X. (2020). Fault diagnosis of rotating machinery with ensemble kernel extreme learning machine based on fused multi-domain features. ISA Transactions, 98, 320–337. https://doi.org/10.1016/j.isatra.2019.08.053CrossRef

Sha, F., & Saul, L. K. (2005). Analysis and extension of spectral methods for nonlinear dimensionality reduction. In ICML 2005- Proceedings of the 22nd International Conference on Machine Learning (pp. 784–791). https://doi.org/10.1145/1102351.1102450

Shao, S., McAleer, S., Yan, R., & Baldi, P. (2019). Highly accurate machine fault diagnosis using deep transfer learning. IEEE Transactions on Industrial Informatics, 15(4), 2446–2455. https://doi.org/10.1109/TII.2018.2864759CrossRef

Shikkenawis, G., & Mitra, S. K. (2016). On some variants of locality preserving projection. Neurocomputing, 173, 196–211. https://doi.org/10.1016/j.neucom.2015.01.100CrossRef

Siblini, W., Kuntz, P., & Meyer, F. (2021). A review on dimensionality reduction for multi-label classification. IEEE Transactions on Knowledge and Data Engineering, 33(3), 839–857. https://doi.org/10.1109/TKDE.2019.2940014CrossRef

Su, Z., Tang, B., Liu, Z., & Qin, Y. (2015). Multi-fault diagnosis for rotating machinery based on orthogonal supervised linear local tangent space alignment and least square support vector machine. Neurocomputing, 157, 208–222. https://doi.org/10.1016/j.neucom.2015.01.016CrossRef

Sun, C., Wang, P., Yan, R., Gao, R. X., & Chen, X. (2019). Machine health monitoring based on locally linear embedding with kernel sparse representation for neighborhood optimization. Mechanical Systems and Signal Processing, 114, 25–34. https://doi.org/10.1016/j.ymssp.2018.04.044CrossRef

Tong, C., Shi, X., & Lan, T. (2016). Statistical process monitoring based on orthogonal multi-manifold projections and a novel variable contribution analysis. ISA Transactions, 65, 407–417. https://doi.org/10.1016/j.isatra.2016.06.017CrossRef

Unver, H. O., & Sener, B. (2021). A novel transfer learning framework for chatter detection using convolutional neural networks. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-021-01839-3CrossRef

Wang, R., Chen, H., Guan, C., Gong, W., & Zhang, Z. (2021). Research on the fault monitoring method of marine diesel engines based on the manifold learning and isolation forest. Applied Ocean Research, 112, 102681. https://doi.org/10.1016/j.apor.2021.102681CrossRef

Xi, W., Li, Z., Tian, Z., & Duan, Z. (2018). A feature extraction and visualization method for fault detection of marine diesel engines. Measurement, 116, 429–437. https://doi.org/10.1016/j.measurement.2017.11.035CrossRef

Xu, X., Ding, J., Liu, Q., & Chai, T. (2021). A novel multi manifold joint projections model for multimode process monitoring. IEEE Transactions on Industrial Informatics, 17(9), 5961–5970. https://doi.org/10.1109/TII.2020.3036676CrossRef

Yang, A., Wang, Y., Zi, Y., & Chow, T. W. S. (2019). An enhanced trace ratio linear discriminant analysis for fault diagnosis: an illustrated example using HDD data. IEEE Transactions on Instrumentation and Measurement, 68(12), 4629–4639. https://doi.org/10.1109/TIM.2019.2900885CrossRef

Zhang, Y., Peng, L., Li, X., & Xie, Y. (2020). A sparse robust adaptive filtering algorithm based on the q-Rényi Kernel function. IEEE Signal Processing Letters, 27, 476–480. https://doi.org/10.1109/LSP.2020.2978408CrossRef

Zhao, X., & Jia, M. (2018). Fault diagnosis of rolling bearing based on feature reduction with global-local margin Fisher analysis. Neurocomputing, 315, 447–464. https://doi.org/10.1016/j.neucom.2018.07.038CrossRef

Zhu, X., Zhang, S., Hu, R., Zhu, Y., & Song, J. (2018). Local and global structure preservation for robust unsupervised spectral feature selection. IEEE Transactions on Knowledge and Data Engineering, 30(3), 517–529. https://doi.org/10.1109/TKDE.2017.2763618CrossRef

Title: Unified discriminant manifold learning for rotating machinery fault diagnosis
Authors: Changyuan Yang
Sai Ma
Qinkai Han
Publication date: 05-09-2022
Publisher: Springer US
Published in: Journal of Intelligent Manufacturing / Issue 8/2023
Print ISSN: 0956-5515
Electronic ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-022-02011-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 8/2023

Augmented arithmetic optimization algorithm using opposite-based learning and lévy flight distribution for global optimization and data clustering

A cyber-physical prototype system in augmented reality using RGB-D camera for CNC machining simulation

A novel feature-fusion-based end-to-end approach for remaining useful life prediction

Manufacturing process classification based on heat kernel signature and convolutional neural networks

Integrated scheduling of production, inventory and imperfect maintenance based on mutual feedback of supplier and demander in distributed environment

Optimization of injection molding process using multi-objective bayesian optimization and constrained generative inverse design networks

Premium Partners