Top

International Journal of Material Forming

Published in:

29-08-2019 | Original Research

Warm deep drawing behavior of Inconel 625 alloy using constitutive modelling and anisotropic yield criteria

Authors: Nitin Kotkunde, Anand Badrish, Ayush Morchhale, Prathamesh Takalkar, Swadesh Kumar Singh

Published in: International Journal of Material Forming | Issue 3/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The present work provides a systematic approach to investigate anisotropic yield criteria and constitutive modeling and its applicability in finite element analysis of warm deep drawing behavior of Inconel 625 alloy. Firstly, the material properties and flow stress behavior of Inconel 625 alloy have been determined at temperatures (room temperature (RT) to 400 °C at an interval of 100 °C) at (0.0001–0.1 s⁻¹) strain rates using uniaxial tensile tests. The flow stress behavior is influenced significantly by strain rate and temperature variation. Various mechanical properties and anisotropic parameters have been studied at different strain rates and temperatures. On the basis of flow stress data, Sellers constitutive model with different anisotropic yield criteria namely; Hill’48 and Barlat’89 has been developed. Subsequently, experiments of deep drawing have been conducted at various processing conditions. The process parameters effect on Limiting Draw Ratio (LDR), thickness distribution, Maximum Thinning Rate (MTR) and Thickness Deviation (TD) has been investigated. Furthermore, Sellers constitutive model coupled with anisotropic yield criteria has been implemented in ABAQUS software using UMAT subroutine. Sellers model coupled with Barlat’89 yield criterion displayed an accurate prediction of warm deep drawing behavior.

previous article Picture-frame testing of woven prepreg fabric: An investigation of sample geometry and shear angle acquisition

next article Influence of thickness reduction on forming limits of mild steel DC01

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Lin YC, Yang H, Xin Y, Li C-Z (2018) Effects of initial microstructures on serrated flow features and fracture mechanisms of a nickel-based superalloy. Mater Charact 144:9–21. https://doi.org/10.1016/j.matchar.2018.06.029 CrossRef

Mahalle G, Salunke O, Kotkunde N et al (2019) Neural network modeling for anisotropic mechanical properties and work hardening behavior of Inconel 718 alloy at elevated temperatures. Journal of Materials Research and Technology 8(2):2130–2140. https://doi.org/10.1016/j.jmrt.2019.01.019 CrossRef

Shoemaker LE (2005) Alloys 625 and 725: trends in properties and applications. In: Superalloys 718, 625, 706 and various derivatives (2005). TMS, pp 409–418

Jeswiet J, Geiger M, Engel U et al (2008) Metal forming progress since 2000. CIRP J Manuf Sci Technol 1(1):2–17. https://doi.org/10.1016/j.cirpj.2008.06.005 CrossRef

Badrish CA, Kotkunde N, Salunke O, et al (2019) Experimental and numerical investigations of Johnson cook constitutive model for hot flow stress prediction of Inconel 625 alloy. In: Proceedings of the 11th international conference on computer modeling and simulation. ACM, New York, pp 36–40e

Cui J, Sun G, Xu J et al (2015) A method to evaluate the formability of high-strength steel in hot stamping. Mater Des 77:95–109. https://doi.org/10.1016/j.matdes.2015.04.009 CrossRef

Kardan M, Parvizi A, Askari A (2018) Experimental and finite element results for optimization of punch force and thickness distribution in deep drawing process. Arab J Sci Eng 43(3):1165–1175. https://doi.org/10.1007/s13369-017-2783-9 CrossRef

Morchhale A (2017) Study of positioning and dimensional optimization of angled stiffeners using finite element analysis of above ground storage tank. International Journal of Research in Mechanical Engineering 10–19

Wallmeier M, Linvill E, Hauptmann M et al (2015) Explicit FEM analysis of the deep drawing of paperboard. Mech Mater 89:202–215. https://doi.org/10.1016/j.mechmat.2015.06.014 CrossRef

10.

Morchhale A (2016) Design and finite element analysis of hydrostatic pressure testing machine used for ductile Iron pipes. MER 6(2):23. https://doi.org/10.5539/mer.v6n2p23 CrossRef

11.

Kotkunde N, Deole AD, Gupta AK, Singh SK (2014) Comparative study of constitutive modeling for Ti–6Al–4V alloy at low strain rates and elevated temperatures. Mater Des 55:999–1005. https://doi.org/10.1016/j.matdes.2013.10.089 CrossRef

12.

Abedrabbo N, Pourboghrat F, Carsley J (2007) Forming of AA5182-O and AA5754-O at elevated temperatures using coupled thermo-mechanical finite element models. Int J Plast 23(5):841–875. https://doi.org/10.1016/j.ijplas.2006.10.005 CrossRefMATH

13.

Naka T, Uemori T, Hino R et al (2008) Effects of strain rate, temperature and sheet thickness on yield locus of AZ31 magnesium alloy sheet. J Mater Process Technol 201(1-3):395–400. https://doi.org/10.1016/j.jmatprotec.2007.11.189 CrossRef

14.

Lin YC, Chen X-M (2011) A critical review of experimental results and constitutive descriptions for metals and alloys in hot working. Mater Des 32(4):1733–1759. https://doi.org/10.1016/j.matdes.2010.11.048 CrossRef

15.

Lin YC, Li K-K, Li H-B et al (2015) New constitutive model for high-temperature deformation behavior of inconel 718 superalloy. Mater Des 74:108–118. https://doi.org/10.1016/j.matdes.2015.03.001 CrossRef

16.

Mahalle G, Kotkunde N, Gupta AK et al (2019) Microstructure characteristics and comparative analysis of constitutive models for flow stress prediction of Inconel 718 alloy. J of Materi Eng and Perform 28(6). https://doi.org/10.1007/s11665-019-04116-w

17.

Gujrati R, Gupta C, Jha JS et al (2019) Understanding activation energy of dynamic recrystallization in Inconel 718. Mater Sci Eng A 744:638–651. https://doi.org/10.1016/j.msea.2018.12.008 CrossRef

18.

Banabic D (2010) Sheet metal forming processes: constitutive modelling and numerical simulation. Springer-Verlag, Berlin HeidelbergCrossRef

19.

Kotkunde N, Deole AD, Gupta AK, Singh SK (2014) Experimental and numerical investigation of anisotropic yield criteria for warm deep drawing of Ti–6Al–4V alloy. Mater Des 63:336–344. https://doi.org/10.1016/j.matdes.2014.06.017 CrossRef

20.

Barlat F, Brem JC, Yoon JW et al (2003) Plane stress yield function for aluminum alloy sheets—part 1: theory. Int J Plast 19(9):1297–1319. https://doi.org/10.1016/S0749-6419(02)00019-0 CrossRefMATH

21.

Chun BK, Jinn JT, Lee JK (2002) Modeling the Bauschinger effect for sheet metals, part I: theory. Int J Plast 18(5-6):571–595. https://doi.org/10.1016/S0749-6419(01)00046-8 CrossRefMATH

22.

Lin YC, Wen D-X, Chen M-S et al (2016) Improved dislocation density-based models for describing hot deformation behaviors of a Ni-based superalloy. J Mater Res 31(16):2415–2429. https://doi.org/10.1557/jmr.2016.220 CrossRef

23.

Naranje V, Kumar S, Kashid S et al (2016) Prediction of life of deep drawing die using artificial neural network. Advances in Materials and Processing Technologies 2(1):132–142. https://doi.org/10.1080/2374068X.2016.1160601 CrossRef

24.

Basak S, Panda SK (2017) Implementation of YLD-96 plasticity theory in formability analysis of bi-axial pre-strained steel sheets. Procedia Engineering 173:1085–1092. https://doi.org/10.1016/j.proeng.2016.12.189 CrossRef

25.

Prasad KS, Panda SK, Kar SK et al (2018) Effect of solution treatment on deep drawability of IN718 sheets: experimental analysis and metallurgical characterization. Mater Sci Eng A 727:97–112. https://doi.org/10.1016/j.msea.2018.04.110 CrossRef

26.

Abedrabbo N, Pourboghrat F, Carsley J (2006) Forming of aluminum alloys at elevated temperatures – part 2: numerical modeling and experimental verification. Int J Plast 22(2):342–373. https://doi.org/10.1016/j.ijplas.2005.03.006 CrossRefMATH

27.

Prasad KS, Panda SK, Kar SK et al (2018) Prediction of fracture and deep drawing behavior of solution treated Inconel-718 sheets: numerical modeling and experimental validation. Mater Sci Eng A 733:393–407. https://doi.org/10.1016/j.msea.2018.07.007 CrossRef

28.

Kotkunde N, Deole AD, Gupta AK et al (2014) Failure and formability studies in warm deep drawing of Ti–6Al–4V alloy. Mater Des 60:540–547. https://doi.org/10.1016/j.matdes.2014.04.040 CrossRef

29.

Verleysen P, Peirs J, Van Slycken J et al (2011) Effect of strain rate on the forming behaviour of sheet metals. J Mater Process Technol 211(8):1457–1464. https://doi.org/10.1016/j.jmatprotec.2011.03.018 CrossRef

30.

Lazarescu L, Nicodim I, Banabic D (2015) Evaluation of Drawing Force and Thickness Distribution in the Deep-Drawing Process with Variable Blank-Holding. In: Key Engineering Materials. https://www.scientific.net/KEM.639.33. Accessed 9 Jun 2019

31.

Hill R (1990) Constitutive modelling of orthotropic plasticity in sheet metals. Journal of the Mechanics and Physics of Solids 38(3):405–417. https://doi.org/10.1016/0022-5096(90)90006-P MathSciNetCrossRefMATH

32.

Barlat F, Lian K (1989) Plastic behavior and stretchability of sheet metals. Part I: a yield function for orthotropic sheets under plane stress conditions. Int J Plast 5(1):51–56. https://doi.org/10.1016/0749-6419(89)90019-3 CrossRef

Title: Warm deep drawing behavior of Inconel 625 alloy using constitutive modelling and anisotropic yield criteria
Authors: Nitin Kotkunde
Anand Badrish
Ayush Morchhale
Prathamesh Takalkar
Swadesh Kumar Singh
Publication date: 29-08-2019
Publisher: Springer Paris
Published in: International Journal of Material Forming / Issue 3/2020
Print ISSN: 1960-6206
Electronic ISSN: 1960-6214
DOI: https://doi.org/10.1007/s12289-019-01505-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2020

Constitutive behavior and hot workability of multi-direction forged T2 copper during hot compression deformation

Influence of material modeling on warm forming behavior of nickel based super alloy

Picture-frame testing of woven prepreg fabric: An investigation of sample geometry and shear angle acquisition

From specified product tolerance to acceptable material and process scatter: an inverse robust optimization approach

Advanced FE model validation of cold-forming process using DIC: Air bending of high strength steel

Influence of thickness reduction on forming limits of mild steel DC01

Premium Partners