Top

Journal of Materials Engineering and Performance

Published in:

01-07-2014

Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling

Authors: S. Belyaev, N. Resnina, A. Sibirev

Published in: Journal of Materials Engineering and Performance | Issue 7/2014

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Residual strain accumulation during thermal cycling of the Ti₅₀Ni₅₀ alloy under a constant stress of 200 MPa through the temperature range of complete and incomplete forward martensitic transformation was studied. The temperature range of the forward martensitic transformation during thermal cycling was chosen as 25, 50, 75, or 100% of the M _s-M_f interval measured in the first cycle. It was shown that intensive accumulation of residual strain took place in the last stage of the forward transformation. It was observed that resistivity increased more rapidly with an increase of the fraction of the temperature range of forward martensitic transformation.

previous article In Situ Optical Microscope Study of the Thermally Induced Displacive Transformations in Cualni-Based Shape-Memory Alloys

next article Work Production and Variation in Shape Memory Effects during Thermal Cycling of Equiatomic TiNi Alloy

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

J. Van Humbeeck, Cycling Effects. Fatigue and Degradation of Shape Memory Alloys, J. Phys. IV, 1991, 1, p 199

Y. Furuya and Y.C. Park, Thermal Cyclic Deformation and Degradation of Shape Memory Effect in Ti-Ni Alloy, Nondestr. Test. Eval., 1992, 8-9, p 541–554CrossRef

S. Miyazaki and C.M. Wayman, The R-Phase Transition and Associated Shape Memory Mechanism in Ti-Ni Single Crystals, Acta Metall., 1988, 36, p 181CrossRef

S. Miyazaki, Y. Igo, and K. Otsuka, Effect of Thermal Cycling on the Transformation Temperatures of TiNi Alloys, Acta Metall., 1986, 34, p 2045–2051CrossRef

P.G. McCormick and Y. Liu, Thermodynamic Analysis of the Martensitic Transformation in NiTi—II. Effect of Transformation Cycling, Acta Metall. Mater., 1994, 42, p 2407–2413CrossRef

J. Kwarciak, Z. Lekston, and H. Morawirec, Effect of Thermal Cycling and Ti₂Ni Precipitation on the Stability of the Ni-Ti Alloys, J. Mater. Sci., 1987, 7, p 2341–2345CrossRef

K. Gall and H. Maier, Cyclic Deformation Mechanisms in Precipitated NiTi Shape Memory Alloys, Acta Mater., 2002, 50, p 4643–4657CrossRef

J. Uchil, K.G. Kumara, and K.K. Mahesh, Effect of Thermal Cycling on R-Phase Stability in a NiTi Shape Memory Alloy, Mater. Sci. Eng. A, 2002, 332, p 25–28CrossRef

K. Otsuka and X. Ren, Physical Metallurgy of Ti-Ni-Based Shape Memory Alloys, Prog. Mater. Sci., 2005, 50, p 511–678CrossRef

10.

T. Simon, A. Kröger, C. Somsen, A. Dlouhy, and G. Eggeler, On the Multiplication of Dislocations During Martensitic Transformations in NiTi Shape Memory Alloys, Acta Mater., 2010, 58(2010), p 1850–1860CrossRef

11.

S. Belyaev, N. Resnina, and A. Sibirev, Peculiarities of Residual Strain Accumulation During Thermal Cycling of TiNi Alloy, J. Alloys Compd., 2012, 542, p 37–42CrossRef

12.

S.V. Raj and R.D. Noebe, Low Temperature Creep of Hot-Extruded Near-Stoichiometric NiTi Shape Memory Alloy Part II: Effect of Thermal Cycling, Mater. Sci. Eng. A, 2013, 581, p 154–163CrossRef

13.

S. Belyaev and N. Resnina, Stability of Mechanical Behavior and Work Performance in TiNi-Based Alloys During Thermal Cycling, Int. J. Mater. Res., 2013, 104, p 11–17CrossRef

Title: Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling
Authors: S. Belyaev
N. Resnina
A. Sibirev
Publication date: 01-07-2014
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 7/2014
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-014-0982-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7/2014

Effect of Surface Alloying by Silicon on the Corrosion Resistance and Biocompatibility of the Binary NiTi

Modeling and Simulation of SMA Medical Devices Undergoing complex Thermo-mechanical Loadings

Reversible Characteristics and Cycling Effects of the ε ↔ γ Martensitic Transformations in Fe-Mn-Cr Twip/Trip Steels

Influence of Surface Morphology on the Torsion Fracture of NiTi Endodontic Instruments

Effect of Different Shape-Memory Processing Methods on the Thermomechanical Cyclic Properties of a Shape-Memory Polyurethane

An Examination of the Mechanical Behavior of Shape Memory Nitinol Wires at Various Temperatures

Premium Partners