Top

The International Journal of Advanced Manufacturing Technology

Published in:

23-08-2020 | ORIGINAL ARTICLE

All position-dependent geometric error identification for rotary axes of five-axis machine tool using double ball bar

Authors: Qingzhao Li, Wei Wang, Jing Zhang, Hai Li

Published in: The International Journal of Advanced Manufacturing Technology | Issue 5-6/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The position-dependent geometric errors (PDGEs) of the rotary axes have a critical influence on the accuracy of the five-axis machine tool. It is necessary to measure, identify, and further compensate the PDGEs to improve the accuracy of the five-axis machine tool. The present study presents a method to identify the PDGEs of the rotary axes using the double ball bar (DBB). The presented method requires eight measurement patterns based on four different installation positions of the DBB. All 12 PDGEs of the rotary axes can be identified, especially the angular positioning error that cannot be identified in most of the other presented methods. Experimental verification is carried out, and the measurement uncertainty and the limitations of the presented method are analyzed. Compared with some other reported studies, the advantage of the presented method is that it can identify all PDGEs of the rotary axis and requires less measurement patterns.

previous article Research on the CNC incremental forming based on multidirectional real-time adjustment of the sheet posture

next article A hybrid model for force prediction in orthogonal cutting with chamfered tools considering size and edge effect

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

ISO 230-1 (2012) Test code for machine tools – part 1: geometric accuracy of machines operating under no-load or quasi-static conditions, ISO

Zhang G, Ouyang R, Lu B, Hoeken R, Veale R, Donmz A (1988) A displacement method for machine geometry calibration. CIRP Ann 37(1):515–518CrossRef

Chen G, Yuan J, Ni J (2001) A displacement measurement approach for machine geometric error assessment. Int J Mach Tools Manuf 41(1):149–161CrossRef

Wang SM, Ehmann KF (1999) Measurement methods for the position errors of a multi-axis machine. Part 2: applications and experimental results. Int J Mach Tools Manuf 39(9):1485–1505CrossRef

Li J, Xie F, Liu X, Li W, Zhu S (2016) Geometric error identification and compensation of linear axes based on a novel 13-line method. Int J Adv Manuf Technol 87(5-8):2269–2283CrossRef

Ibaraki S, Hata T, Matsubara A (2009) A new formulation of laser step-diagonal measurement—two-dimensional case. Precis Eng 33(1):56–64CrossRef

Chen Y, Lin W, Liu C (2017) Design and experimental verification of novel six-degree-of freedom geometric error measurement system for linear stage. Opt Lasers Eng 92:94–104CrossRef

Hong C, Ibaraki S, Oyama C (2012) Graphical presentation of error motions of rotary axes on a five-axis machine tool by static R-test with separating the influence of squareness errors of linear axes. Int J Mach Tools Manuf 59:24–33CrossRef

Zhong L, Bi Q, Huang N, Wang Y (2018) Dynamic accuracy evaluation for five-axis machine tools using S trajectory deviation based on R-test measurement. Int J Mach Tools Manuf 125:20–33CrossRef

10.

Ibaraki S, Iritani T, Matsushita T (2012) Calibration of location errors of rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe. Int J Mach Tools Manuf 58:44–53CrossRef

11.

Holub M, Jankovych R, Andrs O, Kolibal Z (2018) Capability assessment of CNC machining centres as measuring devices. Measurement 118:52–60CrossRef

12.

Pezeshki M, Arezoo B (2016) Kinematic errors identification of three-axis machine tools based on machined work pieces. Precis Eng 43:493–504CrossRef

13.

Ibaraki S, Ota Y (2014) A machining test to calibrate rotary axis error motions of five-axis machine tools and its application to thermal deformation test. Int J Mach Tools Manuf 86:81–88CrossRef

14.

Usop Z, Sarhan AA, Mardi NA, Wahab MNA (2015) Measuring of positioning, circularity and static errors of a CNC Vertical Machining Centre for validating the machining accuracy. Measurement 61:39–50CrossRef

15.

Lee KI, Yang SH (2013) Accuracy evaluation of machine tools by modeling spherical deviation based on double ball-bar measurements. Int J Mach Tools Manuf 75:46–54CrossRef

16.

Lee DM, Zhu Z, Lee KI, Yang SH (2011) Identification and measurement of geometric errors for a five-axis machine tool with a tilting head using a double ball-bar. Int J Precis Eng Manuf 12:337–343CrossRef

17.

Zargarbashi SHH, Mayer JRR (2009) Single setup estimation of a five-axis machine tool eight link errors by programmed end point constraint and on the fly measurement with capball sensor. Int J Mach Tools Manuf 49:759–766CrossRef

18.

Jiang X, Wang L, Liu C (2019) Geometric accuracy evaluation during coordinated motion of rotary axes of a five-axis machine tool. Measurement 146:403–410CrossRef

19.

Tsutsumi M, Saito A (2003) Identification and compensation of systematic deviations particular to 5-axis machining centers. Int J Mach Tools Manuf 43:771–780CrossRef

20.

Tsutsumi M, Saito A (2004) Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting-rotary table by simultaneous four-axis control movements. Int J Mach Tools Manuf 44:1333–1342CrossRef

21.

Uddin MS, Ibaraki S, Matsubara A, Matsushita T (2009) Prediction and compensation of machining geometric errors of five-axis machining centers with kinematic errors. Precis Eng 33:194–201CrossRef

22.

Lee KI, Yang SH (2013) Measurement and verification of position-independent geometric errors of a five-axis machine tool using a double ball-bar. Int J Mach Tools Manuf 70:45–52CrossRef

23.

Xiang S, Yang J, Zhang Y (2014) Using a double ball bar to identify position-independent geometric errors on the rotary axes of five-axis machine tools. Int J Adv Manuf Technol 70(9-12):2071–2082CrossRef

24.

Jiang X, Cripps RJ (2015) A method of testing position independent geometric errors in rotary axes of a five-axis machine tool using a double ball bar. Int J Mach Tools Manuf 89:151–158CrossRef

25.

Jiang X, Cripps RJ (2016) Geometric characterisation and simulation of position independent geometric errors of five-axis machine tools using a double ball bar. Int J Adv Manuf Technol 83(9-12):1905–1915CrossRef

26.

Qiao Y, Chen Y, Yang J, Chen B (2017) A five-axis geometric errors calibration model based on the common perpendicular line (CPL) transformation using the product of exponentials (POE) formula. Int J Mach Tools Manuf 118:49–60CrossRef

27.

Yang J, Mayer JRR, Altintas Y (2015) A position independent geometric errors identification and correction method for five-axis serial machines based on screw theory. Int J Mach Tools Manuf 95:52–66CrossRef

28.

Wu H, Zheng H, Wang W, Xiang X, Rong M (2020) A method for tracing key geometric errors of vertical machining center based on global sensitivity analysis. Int J Adv Manuf Technol 106(9-10):3943–3956CrossRef

29.

Zargarbashi SHH, Mayer JRR (2006) Assessment of machine tool trunnion axis motion error, using magnetic double ball bar. Int J Mach Tools Manuf 46:1823–1834CrossRef

30.

Xiang S, Yang J (2014) Using a double ball bar to measure 10 position-dependent geometric errors for rotary axes on five-axis machine tools. Int J Adv Manuf Technol 75(1-4):559–572CrossRef

31.

Peng W, Xia H, Chen X, Lin Z, Wang Z, Li H (2018) Position-dependent geometric errors measurement and identification for rotary axis of multi-axis machine tools based on optimization method using double ball bar. Int J Adv Manuf Technol 99(9-12):2295–2307CrossRef

32.

Ding S, Wu W, Huang X, Song A, Zhang Y (2019) Single-axis driven measurement method to identify position-dependent geometric errors of a rotary table using double ball bar. Int J Adv Manuf Technol 101(5-8):1715–1724CrossRef

33.

ISO 230-7 (2015) Test code for machine tools-part 7: geometric accuracy of axes of rotation, ISO

34.

Xiang S, Altintas Y (2016) Modeling and compensation of volumetric errors for five-axis machine tools. Int J Mach Tools Manuf 101:65–78CrossRef

35.

Wu C, Fan J, Wang Q, Pan R, Tang Y, Li Z (2018) Prediction and compensation of geometric error for translational axes in multi-axis machine tools. Int J Adv Manuf Technol 95(9-12):3413–3435CrossRef

36.

Creamer J, Sammons PM, Bristow DA, Landers RG, Freeman PL, Easley SJ (2017) Table-based volumetric error compensation of large five-axis machine tools. J Manuf Sci Eng 139:021011CrossRef

37.

Creamer J, Bristow DA, Landers RG (2017) Selection of limited and constrained compensation tables for five-axis machine tools. Int J Adv Manuf Technol 92:1315–1327CrossRef

Title: All position-dependent geometric error identification for rotary axes of five-axis machine tool using double ball bar
Authors: Qingzhao Li
Wei Wang
Jing Zhang
Hai Li
Publication date: 23-08-2020
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 5-6/2020
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-020-05962-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-6/2020

Prediction model of peripheral milling surface geometry considering cutting force and vibration

A hybrid approach for cutting force prediction in flank milling based on analytical and 3D finite element method

Optimization and fabrication of curvilinear micro-grooved cutting tools for sustainable machining based on finite element modelling of the cutting process

The effect of scan path on thermal gradient during selective laser melting

Numerical simulation for deformation characteristics and fracture prediction of perforated sheet in incremental sheet punching

Determination of pressurizing rate during hot gas forming with integrated heat treatment of Al–Cu–Li alloy: deformation and strengthening behaviors

Premium Partners