Top

Journal of Materials Engineering and Performance

Published in:

12-06-2023 | Review

Application of the Chemomechanical Effect in Drawing Alloys with Low Plasticity

Authors: Emmanuel M. Gutman, Yaakov B. Unigovski, Tijun Chen, Feng Ye, Roni Z. Shneck

Published in: Journal of Materials Engineering and Performance | Issue 23/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This review provides a brief theoretical basis for the electrochemical plasticization of metals during plastic deformation and summarizes the results of large-scale laboratory experiments on cold drawing of various alloys. Simultaneous action of anodic polarization and plastic deformation during cold drawing effectively promotes the softening of the surface layer of metals due to the chemomechanical effect. This action creates favorable conditions for multiple slip and destruction of pile-ups and also causes an additional flow of dislocations, leading to a softening of the surface and a decrease in the drawing force during electrochemical drawing (ECD) compared to drawing in air (DIA). The drawing force is the smallest and the softening degree is the largest in aqueous solutions of sulfuric acid, in which the corrosion rate is high, and surface layer dissolves uniformly. The softening degree during ECD, as compared to DIA, gradually decreases as the drawing speed increases due to the reduction in the time required for most reactions and reagent transfer. As the number of passes through the die is increased, the softening effect in ECD compared to DIA can increase or decrease depending on the drawing speed and hardness of the metal.

next article Selecting the Appropriate Filler Metal to Join HSLA-100 Steel by Gas Tungsten Arc Welding Process

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

J.R. Davis (ed.), Properties and Selection: Nonferrous Alloys and Special-Purpose Materials. ASM International Handbook Committee, Metals Handbook, vol. 2 (ASM International, Materials Park, 2000)

Y.T. Zhu and X.L. Wu, Ductility and Plasticity of Nanostructured Metals: Differences and Issues, Mater. Today Nano, 2018, 2, p 15–20.CrossRef

R.M. Bozorth, Ferromagnetism, Van Nostrand, New York, 1951.

W. Yang, H. Li, K. Yang, Y.F. Liang, J. Yang, and F. Ye, Hot Drawn Fe-6.5 wt.%Si Wires with Good Ductility, Mater. Sci. Eng. B, 2014, 186, p 79–82.CrossRef

N. Dodyima, K. Yoshida, T. Murata, and Y. Kobayashi, Drawing of Magnesium Fine Wire and Medical Application of Drawn Wire, Procedia Manuf., 2020, 50, p 271–275. (18th International Conference Metal Forming 2020 Project)CrossRef

Verfahren zur Herstellung von Gezogenen Drähten, insbesondere Schweißdrähten (Method to produce drawn wire, especially welding wire) (1933), German Pat. 579797

H. Bittel, Verfahren und Vorrichtung zur Herstellung von Feindrähten Durch Elektrolytisches Abtragen (Method and apparatus for producing thin wire by electrolytic removal) (1957), German Pat. 1014815

Y.I. Blinov, Ya.N. Lipkin, A.S. Mikryukov, E.M. Gutman, Ustroistvo Dlya Mokrogo Volocheniya Metalla (Wet drawing machine), Patents USSR, nos.1103918, 1103919, 22.03.1984. https://patentdb.ru/patent/1103918, https://patentdb.ru/patent/1103919

E.M. Gutman, Mechanochemistry of Solid Surfaces, World Scientific Publishing, New Jersey, 1994. https://doi.org/10.1142/2373CrossRef

10.

D.J. Philips and N. Tompson, Surface Effects in Creep of Cadmium Crystals, Proc. Phys. Soc. Lond. (B), 1950 https://doi.org/10.1088/0370-1301/63/11/302CrossRef

11.

E.D. Andrade and R.F. Randall, Surface Effects with Single Crystal Wires of Cadmium, Nature, 1948, 162, p 890. https://doi.org/10.1038/162890b0CrossRef

12.

R.W. Revie and H. Uhlig, Effect of Applied Potential and Surface Dissolution on the Creep Behavior of Copper, Acta Metall., 1974, 22, p 619. https://doi.org/10.1016/0001-6160(74)90159-XCrossRef

13.

C.J. Van Der Wekken, The Effect of Surface Dissolution on the Creep Rate of Copper, Acta Metall., 1977, 25(10), p 1201.CrossRef

14.

B. Gu, W.Y. Chu, W. Chu, L.J. Qiao, and C.M. Hsiao, The Effect of Anodic Polarization on the Ambient Creep of Brass, Corros. Sci., 1994, 36(8), p 1437. https://doi.org/10.1016/0010-938X(94)90191-0CrossRef

15.

R.M. Latanision and R.W. Staehle, Plastic Deformation of Electrochemically Polarized Nickel Single Crystals, Acta Metall., 1969, 17(3), p 307. https://doi.org/10.1016/0001-6160(69)90071-6CrossRef

16.

C.J. Van Der Wekken, Surface Dislocation Pinning By Adsorbed Ions and Water Molecules, J. Electrochem. Soc., 1984, 131(11), p 2481. https://doi.org/10.1149/1.2115328CrossRef

17.

T.P. Hoar and J.C. Scully, Mechanochemical Anodic Dissolution of Austenitic Stainless Steel in Hot Chloride Solution at Controlled Electrode Potential, J. Electrochem. Soc., 1964, 111(3), p 348. https://doi.org/10.1149/1.2426120/pdfCrossRef

18.

R. Nishimura and K. Kudo, Stress Corrosion Craking of AISI 304 and AISI 316 Austenitic Stainless Steels in HCl and H₂SO₄ Solutions—Prediction of Time-to-Failure and Criterion for Assessment of SCC Susceptibility, Corrosion, 1989, 45(4), p 308. https://doi.org/10.5006/1.3577859CrossRef

19.

K.S. Raja, S.A. Namjoshi, and D.A. Jones, Corrosion-Creep Interaction of Stainless Alloys in Acid Chloride Solutions, Metall. Mater. Trans. A Phys. Metallurgy Mater. Sci., 2005, 36A(5), p 1107. https://doi.org/10.1007/s11661-005-0204-2CrossRef

20.

Y.B. Unigovski, E.M. Gutman, Z. Koren, T. Poryadkov, and H. Rosenson, Corrosion Creep of Metals, J. Phys. Conf. Ser., 2008 https://doi.org/10.1088/1742-6596/98/7/072004CrossRef

21.

E.M. Gutman, Y. Unigovski, A. Eliezer, and E. Abramov, Mechanoelectrochemical Behavior of Pure Magnesium and Magnesium Alloys Stressed in Aqueous Solutions, J. Mater. Synth. Process., 2000, 8(3), p 133. https://doi.org/10.1023/A:1011399723559CrossRef

22.

Y. Unigovski, Z. Keren, A. Eliezer, and E.M. Gutman, Creep Behavior of Pure Magnesium and Mg-Al Alloys in Active Environments, Mater. Sci. Eng. A, 2005, 398(1–2), p 188. https://doi.org/10.1016/j.msea.2005.03.017CrossRef

23.

Y.B. Unigovski, E.M. Gutman, Z. Koren, H. Rosenson, Y. Hao, and T. Chen, Effect of Processing on Stress-Corrosion Behavior of Die-Cast Mg-Al Alloy, J. Mater. Process. Technol., 2008, 208(1–3), p 395. https://doi.org/10.1016/j.jmatprotec.2008.01.004CrossRef

24.

Y.B. Unigovski and E.M. Gutman, Corrosion Creep and Fatigue Behavior of Mg Alloys, Corrosion of Magnesium Alloys. G.L. Song Ed., Woodhead Publ., Oxford, 2011, p 365–402CrossRef

25.

E.M. Gutman, Mechanochemistry of Metals and Corrosion Prevention (Moscow: Metallurgy, 1974 (1st ed), 1981 (2nd ed.)) (in Russian)

26.

E.M. Gutman, Surface Placticity Modification Using Electrolytic Etching, Surf. Coat. Technol., 1994, 67(1–2), p 133. https://doi.org/10.1016/S0257-8972(05)80037-4CrossRef

27.

X.H. Guo, B.T. Lu, and J.L. Luo, Responce of Surface Mechanical Properties to Electrochemical Dissolution Determined by In Situ Nanoindentation Technique, Electrochem. Commun., 2006, 8, p 1092–1098. https://doi.org/10.1016/j.elecom.2006.04.020CrossRef

28.

E.M. Gutman, Ya. Unigovski, R. Shneck, F. Ye, and Y. Liang, Electrochemically Enhanced Surface Plasticity of Steels, Appl. Surf. Sci., 2016, 388, p 49. https://doi.org/10.1016/j.apsusc.2016.04.071CrossRef

29.

R.K. Zhu, B.T. Lu, J.L. Luo et al., Effect of Cold Work on Surface Reactivity and Nanohardness of Alloy 800 in Corroding Environment, Appl. Surf. Sci., 2013, 270, p 733. https://doi.org/10.1016/j.apsusc.2013.01.150CrossRef

30.

J.M. Olive and C. Sarrazin, Effect of Anodic Dissolution on Creep Rate of Austenitic Stainless Steel, Corrosion-Deformation Interactions. T. Magnin, J.M. Gras Ed., Les Editions de Phyisque, France, 1993, p 153

31.

J.A. Schey Ed., Metal Deformation Processes: Friction and Lubrication, Marcel Dekker, Inc., 1970, p 807

32.

U.S. Dixit, V. Yadav, P.M. Pandey, A. Roy, and V.V. Silberschmidt, Modeling of Friction in Manufacturing Processes, Mechanics of Materials in Modern Manufacturing Methods and Processing Techniques. V.V. Silberschmidt Ed., Elsevier, 2020, p 415–444CrossRef

33.

R.T. Barrett, Fastener Design Manual, NASA Reference Publication, 1990, p 1228

34.

L. Li, T.J. Chen, S. Zhang, E.M. Gutman, Y. Unigovski, and F. Yan, Electrochemical Cold Drawing of Mg Alloy Bars, Mater. Sci. Technol., 2017, 33(2), p 244. https://doi.org/10.1080/02670836.2016.1187333CrossRef

35.

L. Li, T.J. Chen, S. Zhang, and F. Yan, Electrochemical Cold Drawing of In Situ Mg₂Si_p/AM60B Composite: A Comparison with the AM60B Alloy, J. Mater. Process. Tech., 2017, 240, p 33. https://doi.org/10.1016/j.jmatprotec.2016.09.007CrossRef

36.

T.J. Chen, B.Q. Yang, B. Li, J.L. Guo, P. Zhang, and X.Z. Cao, Effects of Electrochemical Corrosion Characteristics on Electrochemical Cold Drawing of Q235 Steel Bar, J. Mater. Process. Technol., 2020, 275, p 116375. https://doi.org/10.1016/j.jmatprotec.2019.116375CrossRef

37.

J. Guo, T. Chen, and B. Li, Effect of Drawing Pass on Softening or Plasticizing of Q235 Steel Bar during Electrochemical Cold Drawing, Metals, 2020, 10(6), p 715. https://doi.org/10.3390/met10060715CrossRef

38.

J. Guo and T. Chen, Effect of Surface Layer Softening from Previous Electrochemical Corrosion on Electrochemical Cold Drawing of Q235 Steel Bar, J. Iron Steel Res. Int., 2022, 29, p 819–835. https://doi.org/10.1007/s42243-021-00675-2CrossRef

39.

D. Zhao, F. Ye, Y.B. Unigovski, E.M. Gutman, and R. Shneck, Enhanced Corrosion Resistance of Hard Steel Wires Produced by Electrochemical Cold Drawing, J. Met. Mater. Miner., 2019, 29(3), p 10. https://doi.org/10.14456/jmmm.2019.28CrossRef

40.

D. Zhao, B. Yu, B. Liu, and F. Ye, The Softening Effect During Electrochemical Drawing of AISI 1070 Steel Wire, Int. J. Mod. Phys. B, 2020, 34(1–3), p 2040037. https://doi.org/10.1142/S0217979220400378CrossRef

41.

D. Zhao, F. Ye, B. Liu, H. Du, Y.B. Unigovski, E.M. Gutman, and R. Shneck, Enhancing the Formability of FeSi6.5 Steel by the Anodic Polarization, Int. J. Miner. Metall. Mater., 2022 https://doi.org/10.1007/s12613-021-2356-5CrossRef

42.

Y. Hu, R. Hu, M. Shao, and C. Lin, In situ ECSTM Investigation of Formation and Breakdown of Passive Film for Polycrystalline Stainless Steel, Acta Metall. Sin., 2001, 37, p 965–970. (in Chinese)

43.

X. Yao, F. Xie, Y. Wang, Effects of pH values on corrosive films characteristics and corrosive behaviors of super 13Cr tubing steels in NaCl solutions, Eng. Mater., 2014, 3, p 83–89. (in Chinese)

44.

Z. Panossian, N.L.D. Almeida, R.M.F.D. Sousa, G.D.S. Pimenta, and L.B.S. Marques, Corrosion of Carbon Steel Pipes and Tanks by Concentrated Sulfuric Acid: A Review, Corros. Sci., 2012, 58, p 1–11. https://doi.org/10.1016/j.corsci.2012.01.025CrossRef

45.

H.W. Pickering and C. Wagner, Electrolytic Dissolution of Binary Alloys Containing a Noble Metal, J. Electrochem. Soc., 1967, 114, p 698–706. https://doi.org/10.1149/1.2426709CrossRef

46.

A.J. Forty, Physical Metallurgy of Stress Corrosion Fracture, Interscience, N.Y, 1959, p 99

47.

D.A. Jones and A.F. Jankowski, Anodically Enhanced Diffusion in Cu/Ag Thin Film Couples, Scr. Metall. Mater., 1993, 29, p 701–706.CrossRef

48.

D.A. Jones, A Unified Mechanism of Stress Corrosion and Corrosion Fatigue Cracking, Metall. Trans. A, 1985, 16A, p 1133.CrossRef

49.

R.W. Staehle, in Theory of Stress Corrosion Cracking in Alloys, ed. by J. C. Scully, (NATO, Brussels, 1971), p. 223

50.

M.J. Puska and R.M. Nieminen, Theory of Positrons in Solids and on Solid Surfaces, Rev. Mod. Phys., 1994, 66(3), p 841. https://doi.org/10.1103/RevModPhys.66.841CrossRef

51.

K. Petersen, N. Thrane, and R.M.J. Cotterill, A Positron Annihilation Study of the Annealing of, and Void Formation in, Neutron-Irradiated Molybdenum, Philos. Mag., 1974, 29, p 9–23. https://doi.org/10.1080/14786437408213550CrossRef

52.

G.E. Dieter, Mechanical Metallurgy, 2nd ed. McGraw-Hill, 1976, p 658

53.

P. Gawali, S.C. Sharma, and A. Khare, Variation in Properties due to Speed in Cold Wire Drawing, Int. J. Eng. Dev. Res., 2018, 6(3), p 481.

54.

O.A. Troitskii, Electromechanical Effect in Metals, Pis’ma Zh. Eksp. Teor. Fiz., 1969, 2(10), p 18. (in Russian)

55.

N.E. Kir’yanchev, O.A. Troitskii, and S.A. Klevtsur, Electroplastic Deformation of Metals (review), Strength Mater., 1983, 15, p 709. https://doi.org/10.1007/BF01523224CrossRef

56.

O.A. Troitskii and V.I. Stashenko, Electroplastic Wire Drawing: A Promising Method of Production of Lightweight Wire and Cable, J. Mach. Manuf. Reliab., 2015, 44(8), p 758. https://doi.org/10.3103/S1052618815080087CrossRef

57.

K. Okazaki, M. Kagawa, and H. Conrad, A Study of the Electroplastic Effect in Metals, Scr. Metall., 1978, 12, p 1063. https://doi.org/10.1016/0036-9748(78)90026-1CrossRef

58.

H. Conrad, Study into the Mechanism(s) for the Electroplastic Effect in Metals and its Application to Metalworking, Rep. ARO-18184.12-MS, Order No. AD-A163785/9/GAR, (1985), p. 74. https://apps.dtic.mil/sti/pdfs/ADA209218.pdf

59.

K.-F. Yao, J. Wang, M. Zheng, P. Yu, and H. Zhang, A Research on Electroplastic Effects in Wire-Drawing Process of an Austenitic Stainless Steel, Scr. Mater., 2001, 45(5), p 533. https://doi.org/10.1016/S1359-6462(01)01054-5CrossRef

60.

S.J. Livesey, X. Duan, R. Priestner, and J. Collins, An Electroplastic Effect in 3 1/4% silicon steel, Scr. Mater., 2001, 44, p 803. https://doi.org/10.1016/S1359-6462(00)00658-8CrossRef

Title: Application of the Chemomechanical Effect in Drawing Alloys with Low Plasticity
Authors: Emmanuel M. Gutman
Yaakov B. Unigovski
Tijun Chen
Feng Ye
Roni Z. Shneck
Publication date: 12-06-2023
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 23/2023
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-023-08373-8

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 23/2023

Preparation of In Situ Synthesis TiC/Ti6Al4V Composite Powder with Homogeneous Dispersion by Electrode Induction Gas Atomization Method

Optimizing 3D Printing Process Parameters for the Tensile Strength of Thermoplastic Polyurethane Plastic

Variation of Plate Shape in Laminar Cooling Process of Low Carbon Bainitic Steel Q690D

Corrosion and Mechanical Aspects of Friction Stir Welded AA6061 Joints: Effects of Different Backing Plates

Hot Deformation Behavior of EN30B Forged Steels in the Presence of Non-metallic Inclusions

On the Effect of Testing Frequency on High and Very High Cycle Fatigue Behavior of AA2024-T3, Ti-6Al-4V, and Inconel 718

Premium Partners