Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Journal of Materials Engineering and Performance
Published in: Journal of Materials Engineering and Performance 4/2015

01-04-2015

Correlation of Mechanical Properties with Fracture Surface Features in a Newly Developed Dual-Phase Steel

Authors: Y. Mazaheri, N. Saeidi, A. Kermanpur, A. Najafizadeh

Published in: Journal of Materials Engineering and Performance | Issue 4/2015

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Dual-phase (DP) steels were produced by a newly developed method utilizing simple cold-rolling and subsequent short intercritical annealing of a martensite-ferrite duplex starting structure. Tensile testing revealed an excellent strength-elongation balance (UTS × UE ≈ 110-150 J/cm3) for the DP steels in comparison with the commercially used high strength steels. Fracture surfaces of the tensile specimens were studied by scanning electron microscopy analysis and image processing. Mechanical properties were correlated with fracture surface features. It was found that the variation of the total elongation and strength-elongation balance with the martensite volume fraction could be well correlated with the variation of the average dimple area. The variation of the yield strength and dimple areal density with the martensite volume fraction followed the same trend.
previous article Biaxial Fatigue Crack Growth Behavior in Aluminum Alloy 5083-H116 Under Ambient Laboratory and Saltwater Environments
next article Post-failure Analysis and Fractography of In-plane Tension-Tested Tufted Carbon Fabric-Reinforced Epoxy Composite Laminates

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
N. Saeidi, F. Ashrafizadeh, and B. Niroumand, Development of a New Ultrafine Grained Dual Phase Steel and Examination of the Effect of Grain Size on Tensile Deformation Behavior, Mater. Sci. Eng. A, 2014, 599, p 145–149CrossRef
2.
M. Calcagnotto, Y. Adachi, D. Ponge, and D. Raabe, Deformation and Fracture Mechanisms in Fine- and Ultrafine-Grained Ferrite/Martensite Dual-Phase Steels and the Effect of Aging, Acta Mater., 2011, 59, p 658–670CrossRef
3.
M. Calcagnotto, D. Ponge, and D. Raabe, Effect of Grain Refinement to 1 μm on Strength and Toughness of Dual-Phase Steels, Mater. Sci. Eng. A, 2010, 527, p 7832–7840CrossRef
4.
Y.I. Son, Y.K. Lee, K.T. Park, C.S. Lee, and D.H. Shin, Ultrafine Grained Ferrite-martensite Dual Phase Steels Fabricated via Equal Channel Angular Pressing: Microstructure and Tensile Properties, Acta Mater., 2005, 53, p 3125–3134CrossRef
5.
M. Erdogan, The Effect of New Ferrite Content on the Tensile Fracture Behaviour of Dual Phase Steels, J. Mater. Sci., 2002, 37, p 3623–3630CrossRef
6.
C. Landron, O. Bouaziz, E. Maire, and J. Adrien, Characterization and Modeling of Void Nucleation by Interface Decohesion in Dual Phase Steels, Scripta Mater., 2010, 63, p 973–976CrossRef
7.
C. Landron, E. Maire, O. Bouaziz, J. Adrien, L. Lecarme, and A. Bareggi, Validation of Void Growth Models Using X-ray Microtomography Characterization of Damage in Dual Phase Steels, Acta Mater., 2011, 59, p 7564–7573CrossRef
8.
D.L. Steinbrunner, D.K. Matlock, and G. Krauss, Void Formation During Tensile Testing of Dual Phase Steels, Metall. Trans., 1988, 19, p 579–589CrossRef
9.
I.G. Park and A.W. Thompson, Ductile Fracture in Spheroidized 1520 Steel, Acta Metall., 1988, 36, p 1653–1664CrossRef
10.
A. Das, S.K. Das, and S. Tarafder, Correlation of Fractographic Features with Mechanical Properties in Systematically Varied Microstructures of Cu-Strengthened High-Strength Low-Alloy Steel, Metall. Trans., 2009, 40, p 3138–3146CrossRef
11.
A. Das and S. Tarafder, Geometry of Dimples and Its Correlation with Mechanical Properties in Austenitic Stainless Steel, Scripta Mater., 2008, 59, p 1014–1017CrossRef
12.
S. Sodjit and V. Uthaisangsuk, Microstructure Based Prediction of Strain Hardening Behavior of Dual Phase Steels, Mater. Des., 2012, 41, p 370–379CrossRef
13.
J. Qu, W. Dabboussi, F. Hassani, J. Nemes, and S. Yue, Effect of Microstructure on Static and Dynamic Mechanical Property of a Dual Phase Steel Studied by Shear Punch Testing, ISIJ Int., 2005, 45, p 1741–1746CrossRef
14.
H. Azizi-Alizamini, M. Militzer, and W.J. Poole, Formation of Ultrafine Grained Dual Phase Steels Through Rapid Heating, ISIJ Int., 2011, 51, p 958–964CrossRef
15.
R.G. Davies, Influence of Martensite Composition and Content on the Properties of Dual Phase Steels, Metall. Trans. A, 1978, 9, p 671–679CrossRef
16.
G.R. Speich, R.L. Miller, Mechanical Properties of Ferrite-Martensite Steels. Structure and Properties of Dual-Phase Steels, R.A. Kot, J.W. Morris, Ed., TMS-AIME, New York, 1979, p 145–82
17.
M. Asadi, B.C. De Cooman, and H. Palkowsk, Influence of Martensite Volume Fraction and Cooling Rate on the Properties of Thermomechanically Processed Dual Phase Steel, Mater. Sci. Eng. A, 2012, 538, p 42–52CrossRef
18.
A.R. Marder, The Effect of Heat Treatment on the Properties and Structure of Molybdenum and Vanadium Dual-Phase Steels, Metall. Trans. A, 1981, 12, p 1569–1579CrossRef
19.
Z. Fan and A.P. Miodownik, An Empirical Approach to Strain to Fracture of Two-Ductile-Phase Alloys, Scripta Metall., 1993, 28, p 895–900CrossRef
20.
R. Mohan and C. Marschall, Cracking Instabilities in a Low-Carbon Steel Susceptible to Dynamic Strain Aging, Acta Mater., 1998, 46, p 1933–1948CrossRef
21.
M. Azuma, S. Goutianos, N. Hansen, G. Winther, and X. Huang, Effect of Hardness of Martensite and Ferrite on Void Formation in Dual Phase Steel, Mater. Sci. Technol., 2012, 28, p 1092–1100CrossRef
22.
M. Mazinani and W.J. Poole, Effect of Martensite Plasticity on the Deformation Behaviour of a Low-Carbon Dual-Phase Steel, Metall. Mater. Trans. A, 2007, 38, p 328–339CrossRef
23.
N. Saeidi, F. Ashrafizadeh, B. Niroumand, and F. Barlat, Evaluation of Fracture Micromechanisms in a Fine Grained Dual Phase Steel During Uniaxial Tensile Deformation, Steel Res. Int., 2014, 84, p 1–7
24.
J.P. Bandstra and D.A. Koss, On the Influence of Void Clusters on Void Growth and Coalescence During Ductile Fracture, Acta Mater., 2008, 56, p 4429–4439CrossRef
Metadata
Title
Correlation of Mechanical Properties with Fracture Surface Features in a Newly Developed Dual-Phase Steel
Authors
Y. Mazaheri
N. Saeidi
A. Kermanpur
A. Najafizadeh
Publication date
01-04-2015
Publisher
Springer US
Published in
Journal of Materials Engineering and Performance / Issue 4/2015
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-015-1412-6

Other articles of this Issue 4/2015

Journal of Materials Engineering and Performance 4/2015 Go to the issue

OriginalPaper

Probing Pulsed Current Gas Metal Arc Welding for Modified 9Cr-1Mo Steel

OriginalPaper

Inhibitive Performance of Monoethylene Glycol on CO2 Corrosion of API 5L X52 Steel

OriginalPaper

Corrosion Behavior of Mg-6Al-1Zn+XRE Magnesium Alloy with Minor Addition of Yttrium

OriginalPaper

A Numerical Approach to the Prediction of Hardness at Different Points of a Heat-Treated Steel

OriginalPaper

Modeling the Normal Spectral Emissivity of Aluminum 1060 at 800-910 K During the Growth of Oxide Layer

OriginalPaper

Thermomechanical Modeling of Stress Relaxation in Shape Memory Alloy Wires

Premium Partners

    Image Credits