Top

Journal of Materials Engineering and Performance

Published in:

07-06-2017

Corrosion Behavior of PEO Coatings Formed on AZ31 Alloy in Phosphate-Based Electrolytes with Calcium Acetate Additive

Authors: E. Ziyaei, M. Atapour, H. Edris, A. Hakimizad

Published in: Journal of Materials Engineering and Performance | Issue 7/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The PEO coating started on magnesium AZ31 using a unipolar DC power source. The coating was generated in the electrolyte based on Na₃PO₄·12H₂O and KOH with calcium acetate as additive. The x-ray diffraction method showed some phases containing calcium and phosphate, which was created in the presence of additive. Also, the EDS tests of the sample’s surfaces proved the existence of calcium on the surface. Based on the electrochemical tests results, the most corrosion resistance belongs to the sample with calcium acetate additive. In fact, the results of the EIS tests showed the coating with calcium acetate has the highest resistance but the lowest capacitance. However, this state belongs to the surface morphology, the lower porosity, and surface chemical composition.

previous article Performance of Bond Coats Modified by Platinum Group Metals for Applications in Thermal Barrier Coatings

next article Processing Map of Powder Metallurgy Al-W Alloys at Elevated Temperatures

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

C. Blawert and P. Bala Srinivasan, 6-Plasma electrolytic oxidation treatment of magnesium alloys, Surface Engineering of Light Alloys, H. Dong, Ed., Woodhead Publishing, Cambridge, 2010, p 155–183 CrossRef

A. Fekry, Electrochemical Corrosion Behavior of Magnesium Alloys in Biological Solutions, INTECH Open Access Publisher, Croatia, 2011CrossRef

M. Salahshoor and Y. Guo, Biodegradable Orthopedic Magnesium-Calcium (MgCa) Alloys, Process. Corros. Perform. Mater., 2012, 5(1), p 135–155

T.S.N. Sankara Narayanan, I.S. Park, and M.H. Lee, Strategies to Improve the Corrosion Resistance of Microarc Oxidation (MAO) Coated Magnesium Alloys for Degradable Implants: Prospects and Challenges, Prog. Mater. Sci., 2014, 60, p 1–71CrossRef

L. Zhang, J. Zhang, C.-F. Chen, and Y. Gu, Advances in Microarc Oxidation Coated AZ31 Mg Alloys for Biomedical Applications, Corros. Sci., 2015, 91, p 7–28CrossRef

R. Zeng, W. Dietzel, F. Witte, N. Hort, and C. Blawert, Progress and Challenge for Magnesium Alloys as Biomaterials, Adv. Eng. Mater., 2008, 10(8), p B3–B14CrossRef

D. Persaud-Sharma and A. McGoron, Biodegradable Magnesium Alloys: A Review of Material Development and Applications, J. Biomim. Biomater. Tissue Eng., 2012, 12, p 25–39CrossRef

F. Zhang, Z.-G. Liu, R.-C. Zeng, S.-Q. Li, H.-Z. Cui, L. Song, and E.-H. Han, Corrosion Resistance of Mg–Al-LDH Coating on Magnesium Alloy AZ31, Surf. Coat. Technol., 2014, 258, p 1152–1158CrossRef

E.S. Bogya, Z. Károly, and R. Barabás, Atmospheric Plasma Sprayed Silica–Hydroxyapatite Coatings on Magnesium Alloy Substrates, Ceram. Int., 2015, 41(4), p 6005–6012CrossRef

10.

S. Wang, Y. Xia, L. Liu, and N. Si, Preparation and Performance of MAO Coatings Obtained on AZ91D Mg Alloy Under Unipolar and Bipolar Modes in a Novel Dual Electrolyte, Ceramics International, 2014, 40(1, Part A), p 93–99CrossRef

11.

H. Zhao, S. Cai, S. Niu, R. Zhang, X. Wu, G. Xu, and Z. Ding, The influence of alkali pretreatments of AZ31 magnesium alloys on bonding of bioglass–ceramic coatings and corrosion resistance for biomedical applications, Ceramics International, 2015, 41(3, Part B), p 4590–4600CrossRef

12.

A. Zomorodian, M.P. Garcia, T. Moura e Silva, J.C.S. Fernandes, M.H. Fernandes, and M.F. Montemor, Corrosion Resistance of a Composite Polymeric Coating Applied on Biodegradable AZ31 Magnesium Alloy, Acta Biomater., 2013, 9(10), p 8660–8670CrossRef

13.

R. Zeng, Z. Lan, L. Kong, Y. Huang, and H. Cui, Characterization of Calcium-Modified Zinc Phosphate Conversion Coatings and their Influences on Corrosion Resistance of AZ31 Alloy, Surf. Coat. Technol., 2011, 205(11), p 3347–3355CrossRef

14.

G. Rapheal, S. Kumar, N. Scharnagl, and C. Blawert, Effect of Current Density on the Microstructure and Corrosion Properties of Plasma Electrolytic Oxidation (PEO) Coatings on AM50 Mg Alloy Produced in an Electrolyte Containing Clay Additives, Surf. Coat. Technol., 2016, 289, p 150–164CrossRef

15.

W.-C. Gu, G.-H. Lv, H. Chen, G.-L. Chen, W.-R. Feng, and S.-Z. Yang, Characterisation of Ceramic Coatings Produced by Plasma Electrolytic Oxidation of Aluminum Alloy, Mater. Sci. Eng. A, 2007, 447(1–2), p 158–162CrossRef

16.

V. Raj and M. Mubarak Ali, Formation of Ceramic Alumina Nanocomposite Coatings on Aluminum for Enhanced Corrosion Resistance, J. Mater. Process. Technol., 2009, 209(12–13), p 5341–5352CrossRef

17.

J. Martin, A. Melhem, I. Shchedrina, T. Duchanoy, A. Nominé, G. Henrion, T. Czerwiec, and T. Belmonte, Effects of Electrical Parameters on Plasma Electrolytic Oxidation of Aluminum, Surf. Coat. Technol., 2013, 221, p 70–76CrossRef

18.

S.V. Gnedenkov, O.A. Khrisanfova, A.G. Zavidnaya, S.L. Sinebryukhov, V.S. Egorkin, M.V. Nistratova, A. Yerokhin, and A. Matthews, PEO Coatings Obtained on a Mg–Mn Type Alloy Under Unipolar and Bipolar Modes in Silicate-Containing Electrolytes, Surf. Coat. Technol., 2010, 204(14), p 2316–2322CrossRef

19.

J. Liang, L. Hu, and J. Hao, Characterization of Microarc Oxidation Coatings Formed on AM60B Magnesium Alloy in Silicate and Phosphate Electrolytes, Appl. Surf. Sci., 2007, 253(10), p 4490–4496CrossRef

20.

J. Liang, P.B. Srinivasan, C. Blawert, M. Störmer, and W. Dietzel, Electrochemical Corrosion Behavior of Plasma Electrolytic Oxidation Coatings on AM50 Magnesium Alloy Formed in Silicate and Phosphate-Based Electrolytes, Electrochim. Acta, 2009, 54(14), p 3842–3850CrossRef

21.

D. Sreekanth and N. Rameshbabu, Development and Characterization of MgO/Hydroxyapatite Composite Coating on AZ31 Magnesium Alloy by Plasma Electrolytic Oxidation Coupled with Electrophoretic Deposition, Mater. Lett., 2012, 68, p 439–442CrossRef

22.

X. Lin, X. Wang, L. Tan, P. Wan, X. Yu, Q. Li, and K. Yang, Effect of Preparation Parameters on the Properties of Hydroxyapatite Containing Micro-arc Oxidation Coating on Biodegradable ZK60 Magnesium Alloy, Ceram. Int., 2014, 40(7, Part A), p 10043–10051CrossRef

23.

P. Tian, X. Liu, and C. Ding, In Vitro Degradation Behavior and Cytocompatibility of Biodegradable AZ31 Alloy with PEO/HT Composite Coating, Colloids Surf. B Biointerfaces, 2015, 128, p 44–54CrossRef

24.

P. Whiteside, E. Matykina, J.E. Gough, P. Skeldon, and G.E. Thompson, In Vitro Evaluation of Cell Proliferation and Collagen Synthesis on Titanium Following Plasma Electrolytic Oxidation, J. Biomed. Mater. Res. Part A, 2010, 94A(1), p 38–46CrossRef

25.

M. Mohedano, R. Guzman, R. Arrabal, J.L. López Lacomba, and E. Matykina, Bioactive Plasma Electrolytic Oxidation Coatings—The Role of the Composition, Microstructure, and Electrochemical Stability, J. Biomed. Mater. Res. Part B Appl. Biomater., 2013, 101(8), p 1524–1537CrossRef

26.

P. Bala Srinivasan, J. Liang, R.G. Balajeee, C. Blawert, M. Störmer, and W. Dietzel, Effect of Pulse Frequency on the Microstructure, Phase Composition and Corrosion Performance of a phosphate-Based Plasma Electrolytic Oxidation Coated AM50 Magnesium Alloy, Appl. Surf. Sci., 2010, 256(12), p 3928–3935CrossRef

27.

L.L. Hench, Bioceramics: From Concept to Clinic, J. Am. Ceram. Soc., 1991, 74(7), p 1487–1510CrossRef

28.

A.L. Yerokhin, X. Nie, A. Leyland, A. Matthews, and S.J. Dowey, Plasma Electrolysis for Surface Engineering, Surf. Coat. Technol., 1999, 122(2–3), p 73–93CrossRef

29.

S. Durdu and M. Usta, The Tribological Properties of Bioceramic Coatings Produced on Ti6Al4V Alloy by Plasma Electrolytic Oxidation, Ceram. Int., 2014, 40(2), p 3627–3635CrossRef

30.

S. Durdu, M. Usta, and A.S. Berkem, Bioactive coatings on Ti6Al4V alloy formed by plasma electrolytic oxidation, Surf. Coat. Technol., 2016, 301, p 85–93CrossRef

31.

X. Zhou, G.E. Thompson, P. Skeldon, G.C. Wood, K. Shimizu, and H. Habazaki, Film Formation and Detachment During Anodizing of Al–Mg Alloys, Corros. Sci., 1999, 41(8), p 1599–1613CrossRef

32.

H. Hornberger, S. Virtanen, and A.R. Boccaccini, Biomedical Coatings on Magnesium Alloys—A Review, Acta Biomater., 2012, 8(7), p 2442–2455CrossRef

33.

H. Duan, C. Yan, and F. Wang, Effect of Electrolyte Additives on Performance of Plasma Electrolytic Oxidation Films Formed on Magnesium Alloy AZ91D, Electrochim. Acta, 2007, 52(11), p 3785–3793CrossRef

34.

R.C. Barik, J.A. Wharton, R.J.K. Wood, K.R. Stokes, and R.L. Jones, Corrosion, Erosion, and Erosion–Corrosion Performance of Plasma Electrolytic Oxidation (PEO) Deposited Al2O3 Coatings, Surf. Coat. Technol., 2005, 199(2–3), p 158–167CrossRef

35.

W.-H. Song, Y.-K. Jun, Y. Han, and S.-H. Hong, Biomimetic Apatite Coatings on Micro-Arc Oxidized Titania, Biomaterials, 2004, 25(17), p 3341–3349CrossRef

36.

Y. Zhang, C. Yan, F. Wang, and W. Li, Electrochemical Behavior of Anodized Mg Alloy AZ91D in Chloride Containing Aqueous Solution, Corros. Sci., 2005, 47(11), p 2816–2831CrossRef

37.

M. Shokouhfar, C. Dehghanian, M. Montazeri, and A. Baradaran, Preparation of Ceramic Coating on Ti Substrate by Plasma Electrolytic Oxidation in Different Electrolytes and Evaluation of its Corrosion Resistance: Part II, Appl. Surf. Sci., 2012, 258(7), p 2416–2423CrossRef

38.

D. Mareci, G. Bolat, J. Izquierdo, C. Crimu, C. Munteanu, I. Antoniac, and R.M. Souto, Electrochemical Characteristics of Bioresorbable Binary MgCa Alloys in Ringer’s Solution: Revealing the Impact of Local pH Distributions During In-Vitro Dissolution, Mater. Sci. Eng. C, 2016, 60, p 402–410CrossRef

39.

A.D. King, N. Birbilis, and J.R. Scully, Accurate Electrochemical Measurement of Magnesium Corrosion Rates; a Combined Impedance, Mass-Loss and Hydrogen Collection Study, Electrochim. Acta, 2014, 121, p 394–406CrossRef

40.

F. Witte, J. Fischer, J. Nellesen, H.-A. Crostack, V. Kaese, A. Pisch, F. Beckmann, and H. Windhagen, In Vitro and In Vivo Corrosion Measurements of Magnesium Alloys, Biomaterials, 2006, 27(7), p 1013–1018CrossRef

41.

Y. Gao, A. Yerokhin, E. Parfenov, and A. Matthews, Application of Voltage Pulse Transient Analysis during Plasma Electrolytic Oxidation for Assessment of Characteristics and Corrosion Behaviour of Ca- and P-containing Coatings on Magnesium, Electrochim. Acta, 2014, 149, p 218–230CrossRef

42.

E. Krasicka-Cydzik, Gel-Like Layer Development During Formation of Thin Anodic Films on Titanium in Phosphoric Acid Solutions, Corros. Sci., 2004, 46(10), p 2487–2502CrossRef

43.

M. Jamesh, S. Kumar, and T.S.N. Sankara, Narayanan, Corrosion Behavior of Commercially Pure Mg and ZM21 Mg Alloy in Ringer’s Solution—Long Term Evaluation by EIS, Corros. Sci., 2011, 53(2), p 645–654CrossRef

44.

R. Arrabal, E. Matykina, F. Viejo, P. Skeldon, and G.E. Thompson, Corrosion Resistance of WE43 and AZ91D Magnesium Alloys with Phosphate PEO Coatings, Corros. Sci., 2008, 50(6), p 1744–1752CrossRef

45.

D.J. Mills, An Introduction to Electrochemical Corrosion Testing for Practicing Engineers and Scientists: By W. Stephen Tait, published by PairODocs Publications, Racine, WI, USA, Progress in Organic Coatings, 26(1), 73–74 (1995)

46.

X. Lu, C. Blawert, Y. Huang, H. Ovri, M.L. Zheludkevich, and K.U. Kainer, Plasma Electrolytic Oxidation Coatings on Mg Alloy with Addition of SiO2 Particles, Electrochim. Acta, 2016, 187, p 20–33CrossRef

47.

W. Zhang, B. Tian, K.-Q. Du, H.-X. Zhang, and F.-H. Wang, Preparation and Corrosion Performance of PEO Coating with Low Porosity on Magnesium Alloy AZ91D in Acidic KF System, Int. J. Electrochem. Sci., 2011, 6, p 5228–5248

48.

Y. Gu, C.-F. Chen, S. Bandopadhyay, C. Ning, Y. Zhang, and Y. Guo, Corrosion Mechanism and Model of Pulsed DC Microarc Oxidation Treated AZ31 Alloy in Simulated Body Fluid, Appl. Surf. Sci., 2012, 258(16), p 6116–6126CrossRef

49.

D. Sreekanth, N. Rameshbabu, and K. Venkateswarlu, Effect of Various Additives on Morphology and Corrosion Behavior of Ceramic Coatings Developed on AZ31 Magnesium Alloy by Plasma Electrolytic Oxidation, Ceram. Int., 2012, 38(6), p 4607–4615CrossRef

50.

L. Guo-Hua, C. Huan, W. Xing-Quan, P. Hua, Z. Gu-Ling, Z. Bin, L. Heon-Ju, and Y. Si-Ze, Characteristics of Sealed Plasma Electrolytic Oxidation Coatings with electrochemical Impedance Spectroscopy, Chin. Phys. B, 2010, 19(8), p 085202CrossRef

Title: Corrosion Behavior of PEO Coatings Formed on AZ31 Alloy in Phosphate-Based Electrolytes with Calcium Acetate Additive
Authors: E. Ziyaei
M. Atapour
H. Edris
A. Hakimizad
Publication date: 07-06-2017
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 7/2017
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-017-2765-9

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7/2017

Effect of Zr Addition on the Microstructure and Toughness of Coarse-Grained Heat-Affected Zone with High-Heat Input Welding Thermal Cycle in Low-Carbon Steel

Wear Behavior of Medium Carbon Steel with Biomimetic Surface Under Starved Lubricated Conditions

Influence of Pulse Electrodeposition and Heat Treatment on Microstructure, Tribological, and Corrosion Behavior of Nano-Grain Size Co-W Coatings

Wear Properties of ECAP-Processed AM80 Magnesium Alloy

Effect of Carbon Nanotubes as Reinforcement on the Mechanical Properties of Aluminum-Copper-Magnesium Alloy

Preparation and Characterization of (Mo, W)Si2-SiC Composites by In Situ Microwave Reaction Sintering

Premium Partners