Skip to main content
Top
Published in: Metallurgical and Materials Transactions B 2/2017

01-02-2017

Effect of Mg Addition on the Refinement and Homogenized Distribution of Inclusions in Steel with Different Al Contents

Authors: Linzhu Wang, Shufeng Yang, Jingshe Li, Shuo Zhang, Jiantao Ju

Published in: Metallurgical and Materials Transactions B | Issue 2/2017

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

To investigate the effect of Mg addition on the refinement and homogenized distribution of inclusions, deoxidized experiments with different amounts of aluminum and magnesium addition were carried out at 1873 K (1600 °C) under the condition of no fluid flow. The size distribution of three-dimensional inclusions obtained by applying the modified Schwartz–Saltykov transformation from the observed planar size distribution, and degree of homogeneity in inclusion dispersion quantified by measuring the inter-surface distance of inclusions, were studied as a function of the amount of Mg addition and holding time. The nucleation and growth of inclusions based on homogeneous nucleation theory and Ostwald ripening were discussed with the consideration of supersaturation degree and interfacial energy between molten steel and inclusions. The average attractive force acted on inclusions in experimental steels was estimated according to Paunov’s theory. The results showed that in addition to increasing the Mg addition, increasing the oxygen activity at an early stage of deoxidation and lowering the dissolved oxygen content are conductive to the increase of nucleation rate as well as to the refinement of inclusions Moreover, it was found that the degree of homogeneity in inclusion dispersion decreases with an increase of the attractive force acted on inclusions, which is largely dependent on the inclusion composition and volume fraction of inclusions.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference 1. P. Kaushik, J. Lehmann, and M. Nadif: Metall. Mater. Trans. B, 2012, vol. 43, pp. 710-25.CrossRef 1. P. Kaushik, J. Lehmann, and M. Nadif: Metall. Mater. Trans. B, 2012, vol. 43, pp. 710-25.CrossRef
2.
go back to reference 2. S. Beretta and Y. Murakami: Metall. Mater. Trans. B, 2001, vol. 32, pp. 517-23.CrossRef 2. S. Beretta and Y. Murakami: Metall. Mater. Trans. B, 2001, vol. 32, pp. 517-23.CrossRef
3.
go back to reference P. Juvonen: Master’s Thesis, Helsinki University of Technology, 2004. P. Juvonen: Master’s Thesis, Helsinki University of Technology, 2004.
4.
go back to reference G.N. Shannon and S. Sridhar: High Temp. Mater. Process., vol. 24, pp. 111–24. G.N. Shannon and S. Sridhar: High Temp. Mater. Process., vol. 24, pp. 111–24.
5.
go back to reference 5. S. Sridhar and A.W. Cramb: High Temp. Mater. Processes, 2003, vol. 22, pp. 275-82.CrossRef 5. S. Sridhar and A.W. Cramb: High Temp. Mater. Processes, 2003, vol. 22, pp. 275-82.CrossRef
6.
go back to reference 6. S. Sridhar and A.W. Cramb: Metall. Mater. Trans. B, 2000, vol. 31, pp. 406-10.CrossRef 6. S. Sridhar and A.W. Cramb: Metall. Mater. Trans. B, 2000, vol. 31, pp. 406-10.CrossRef
7.
go back to reference 7. L. Wang, S. Yang, J. Li, T. Wu, W. Liu, and J. Xiong: Metall. Mater. Trans. B, 2016, vol. 47, pp. 99-107.CrossRef 7. L. Wang, S. Yang, J. Li, T. Wu, W. Liu, and J. Xiong: Metall. Mater. Trans. B, 2016, vol. 47, pp. 99-107.CrossRef
8.
go back to reference 8. P.C. Pistorius and N. Verma: Microsc. Microanal., 2011, vol. 17, pp. 963-71.CrossRef 8. P.C. Pistorius and N. Verma: Microsc. Microanal., 2011, vol. 17, pp. 963-71.CrossRef
9.
10.
go back to reference 10. D.S. Sarma, A.V. Karasev, and P.G. Jönsson: ISIJ Int., 2009, vol. 49, pp. 1063-74.CrossRef 10. D.S. Sarma, A.V. Karasev, and P.G. Jönsson: ISIJ Int., 2009, vol. 49, pp. 1063-74.CrossRef
11.
go back to reference 11. F. Ishikawa, T. Takahashi, and T. Ochi: Metall. Mater. Trans. A, 1994, vol. 25, pp. 929-36.CrossRef 11. F. Ishikawa, T. Takahashi, and T. Ochi: Metall. Mater. Trans. A, 1994, vol. 25, pp. 929-36.CrossRef
12.
go back to reference 12. K. Hashimoto, T. Fujimatsu, N. Tsunekage, K. Hiraoka, K. Kida, and E.C. Santos: Mater. Des., 2011, vol. 32, pp. 1605-11.CrossRef 12. K. Hashimoto, T. Fujimatsu, N. Tsunekage, K. Hiraoka, K. Kida, and E.C. Santos: Mater. Des., 2011, vol. 32, pp. 1605-11.CrossRef
13.
go back to reference 13. T.B. Braun, J.F. Elliott, and M.C. Flemings: Metall. Trans. B, 1979, vol. 10, pp. 171-84.CrossRef 13. T.B. Braun, J.F. Elliott, and M.C. Flemings: Metall. Trans. B, 1979, vol. 10, pp. 171-84.CrossRef
14.
go back to reference 14. N. Verma, P.C. Pistorius, R.J. Fruehan, M.S. Potter, H.G. Oltmann, and E.B. Pretorius: Metall. Mater. Trans. B, 2012, vol. 43, pp. 830-40.CrossRef 14. N. Verma, P.C. Pistorius, R.J. Fruehan, M.S. Potter, H.G. Oltmann, and E.B. Pretorius: Metall. Mater. Trans. B, 2012, vol. 43, pp. 830-40.CrossRef
15.
go back to reference 15. N. Verma, P.C. Pistorius, R.J. Fruehan, M.S. Potter, M. Lind, and S. Story: Metall. Mater. Trans. B, 2011, vol. 42, pp 711-19.CrossRef 15. N. Verma, P.C. Pistorius, R.J. Fruehan, M.S. Potter, M. Lind, and S. Story: Metall. Mater. Trans. B, 2011, vol. 42, pp 711-19.CrossRef
16.
go back to reference 16. N. Verma, P.C. Pistorius, R.J. Fruehan, M.S. Potter, M. Lind, and S. Story: Metall. Mater. Trans. B, 2011, vol. 42, pp 720-29.CrossRef 16. N. Verma, P.C. Pistorius, R.J. Fruehan, M.S. Potter, M. Lind, and S. Story: Metall. Mater. Trans. B, 2011, vol. 42, pp 720-29.CrossRef
17.
go back to reference 17. X. Wang, X. Li, Q. Li, F. Huang, H. Li, and J. Yang: Steel Res. Int., 2014, vol. 85, pp. 155-63.CrossRef 17. X. Wang, X. Li, Q. Li, F. Huang, H. Li, and J. Yang: Steel Res. Int., 2014, vol. 85, pp. 155-63.CrossRef
18.
go back to reference 18. G. Yang, X. Wang, F. Huang, P. Wei, and X. Hao: Metall. Mater. Trans. B, 2015, vol. 46, pp. 145-54.CrossRef 18. G. Yang, X. Wang, F. Huang, P. Wei, and X. Hao: Metall. Mater. Trans. B, 2015, vol. 46, pp. 145-54.CrossRef
19.
go back to reference 19. Y. Miki and B.G. Thomas: Metall. Mater. Trans. B, 1999, vol. 30, pp 639-54.CrossRef 19. Y. Miki and B.G. Thomas: Metall. Mater. Trans. B, 1999, vol. 30, pp 639-54.CrossRef
20.
go back to reference 20. L. Zhang, S. Taniguchi, and K. Cai: Metall. Mater. Trans. B, 2000, vol. 31, pp. 253-66.CrossRef 20. L. Zhang, S. Taniguchi, and K. Cai: Metall. Mater. Trans. B, 2000, vol. 31, pp. 253-66.CrossRef
21.
go back to reference 21. L. Zhang, J. Aoki, and B.G. Thomas: Metall. Mater. Trans. B, 2006, vol. 37, pp. 361-79.CrossRef 21. L. Zhang, J. Aoki, and B.G. Thomas: Metall. Mater. Trans. B, 2006, vol. 37, pp. 361-79.CrossRef
22.
go back to reference 22. X. Li, Y. Min, C. Liu, and M. Jiang: Steel Res. Int., 2015, vol. 86, pp. 1530-40.CrossRef 22. X. Li, Y. Min, C. Liu, and M. Jiang: Steel Res. Int., 2015, vol. 86, pp. 1530-40.CrossRef
23.
go back to reference 23. R. Takata, J. Yang, and M. Kuwabara: ISIJ Int., 2007, vol. 47, pp. 1379-86.CrossRef 23. R. Takata, J. Yang, and M. Kuwabara: ISIJ Int., 2007, vol. 47, pp. 1379-86.CrossRef
24.
go back to reference 24. S. Kimura, K. Nakajima, and S. Mizoguchi: Metall. Mater. Trans. B, 2001, vol. 32, pp. 79-85.CrossRef 24. S. Kimura, K. Nakajima, and S. Mizoguchi: Metall. Mater. Trans. B, 2001, vol. 32, pp. 79-85.CrossRef
25.
go back to reference 25. Z.H. Jiang, C. Wang, and W. Gong: Ironmaking Steelmaking, 2015, vol. 42, pp. 669-74.CrossRef 25. Z.H. Jiang, C. Wang, and W. Gong: Ironmaking Steelmaking, 2015, vol. 42, pp. 669-74.CrossRef
27.
go back to reference 27. K. Sakata and H. Suito: Metall. Mater. Trans. B, 1999, vol. 30, pp. 1053-63.CrossRef 27. K. Sakata and H. Suito: Metall. Mater. Trans. B, 1999, vol. 30, pp. 1053-63.CrossRef
28.
29.
go back to reference 29. L. Zhang and W. Pluschkell: Ironmaking Steelmaking, 2003, vol. 30, pp. 106-10.CrossRef 29. L. Zhang and W. Pluschkell: Ironmaking Steelmaking, 2003, vol. 30, pp. 106-10.CrossRef
30.
35.
go back to reference 35. K. Sakata and H. Suito: Metall. Mater. Trans. B, 1999, vol. 30, pp. 1053-63.CrossRef 35. K. Sakata and H. Suito: Metall. Mater. Trans. B, 1999, vol. 30, pp. 1053-63.CrossRef
37.
go back to reference 37. H. Ohta and H. Suito: Metall. Mater. Trans. B, 1997, vol. 28, pp. 1131-39.CrossRef 37. H. Ohta and H. Suito: Metall. Mater. Trans. B, 1997, vol. 28, pp. 1131-39.CrossRef
38.
go back to reference 38. L. Zhang, Y. Ren, H. Duan, W. Yang, and L. Sun: Metall. Mater. Trans. B, 2015, vol. 46, pp. 1809-25.CrossRef 38. L. Zhang, Y. Ren, H. Duan, W. Yang, and L. Sun: Metall. Mater. Trans. B, 2015, vol. 46, pp. 1809-25.CrossRef
39.
go back to reference 39. H. Itoh, M. Hino, and S. Ban-Ya: Metall. Mater. Trans. B, 1997, vol. 28, pp. 953-6.CrossRef 39. H. Itoh, M. Hino, and S. Ban-Ya: Metall. Mater. Trans. B, 1997, vol. 28, pp. 953-6.CrossRef
40.
go back to reference 40. S. Yang, Q. Wang, L. Zhang, J. Li, and K. Peaslee: Metall. Mater. Trans. B, 2012, vol. 43, pp. 731-50.CrossRef 40. S. Yang, Q. Wang, L. Zhang, J. Li, and K. Peaslee: Metall. Mater. Trans. B, 2012, vol. 43, pp. 731-50.CrossRef
41.
42.
go back to reference S.A. Saltykov: Stereology: Proceedings of the Second International Congress for Stereology, H. Elias, ed., Springer, New York, 1967, p. 163. S.A. Saltykov: Stereology: Proceedings of the Second International Congress for Stereology, H. Elias, ed., Springer, New York, 1967, p. 163.
43.
go back to reference 43. T. Li, S. Shimasaki, S. Taniguchi, K. Uesugi, and S. Narita: Metall. Mater. Trans. B, 2013, vol. 44, pp. 750-61.CrossRef 43. T. Li, S. Shimasaki, S. Taniguchi, K. Uesugi, and S. Narita: Metall. Mater. Trans. B, 2013, vol. 44, pp. 750-61.CrossRef
44.
go back to reference 44. I.H. Jung, S.A. Decterov, and A.D. Pelton: J. Phase Equilib. Diff., 2004, vol. 25, pp. 329-45.CrossRef 44. I.H. Jung, S.A. Decterov, and A.D. Pelton: J. Phase Equilib. Diff., 2004, vol. 25, pp. 329-45.CrossRef
45.
47.
go back to reference 47. D.R. Poirier, H. Yin, M. Suzuki, and T. Emi: ISIJ Int., 1998, 38, no. 3, pp. 229-38.CrossRef 47. D.R. Poirier, H. Yin, M. Suzuki, and T. Emi: ISIJ Int., 1998, 38, no. 3, pp. 229-38.CrossRef
48.
49.
go back to reference 49. H. Shibata, X. Jiang, M. Valdez, and A.W. Cramb: Metall. Mater. Trans. B, 2004, vol. 35, pp. 179-81.CrossRef 49. H. Shibata, X. Jiang, M. Valdez, and A.W. Cramb: Metall. Mater. Trans. B, 2004, vol. 35, pp. 179-81.CrossRef
50.
go back to reference 50. M. Humenik and W.D. Kingery: J. Am. Ceram. Soc., 1954, vol. 31, pp. 18-23.CrossRef 50. M. Humenik and W.D. Kingery: J. Am. Ceram. Soc., 1954, vol. 31, pp. 18-23.CrossRef
51.
go back to reference 51. C.M. Fang, S.C. Parker, and G. De With: J. Am. Ceram. Soc., 2000, vol. 83, pp. 2082-4.CrossRef 51. C.M. Fang, S.C. Parker, and G. De With: J. Am. Ceram. Soc., 2000, vol. 83, pp. 2082-4.CrossRef
52.
go back to reference 52. H. Shibata, Y. Watanabe, K. Nakajima, and S.Y. Kitamura: ISIJ Int., 2009, vol. 49, pp. 985-91.CrossRef 52. H. Shibata, Y. Watanabe, K. Nakajima, and S.Y. Kitamura: ISIJ Int., 2009, vol. 49, pp. 985-91.CrossRef
53.
go back to reference 53. R.H. Bruce: Sci. Ceram., 1965, vol. 2, p. 359. 53. R.H. Bruce: Sci. Ceram., 1965, vol. 2, p. 359.
54.
go back to reference 54. M. Hino and K. Ito: Thermodynamic Data for Steelmaking, 2nd ed. Tohoku University Press, Tohoku, 2010, pp. 247-64. 54. M. Hino and K. Ito: Thermodynamic Data for Steelmaking, 2nd ed. Tohoku University Press, Tohoku, 2010, pp. 247-64.
55.
go back to reference 55. U. Lindberg and K. Torssel: Trans. TMS-AIME., 1968, vol. 242, p. 94. 55. U. Lindberg and K. Torssel: Trans. TMS-AIME., 1968, vol. 242, p. 94.
56.
go back to reference 56. Y. Miyashita: Tetsu-to-Hagané., 1966, vol. 52, p. 1049. 56. Y. Miyashita: Tetsu-to-Hagané., 1966, vol. 52, p. 1049.
Metadata
Title
Effect of Mg Addition on the Refinement and Homogenized Distribution of Inclusions in Steel with Different Al Contents
Authors
Linzhu Wang
Shufeng Yang
Jingshe Li
Shuo Zhang
Jiantao Ju
Publication date
01-02-2017
Publisher
Springer US
Published in
Metallurgical and Materials Transactions B / Issue 2/2017
Print ISSN: 1073-5615
Electronic ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-017-0915-y

Other articles of this Issue 2/2017

Metallurgical and Materials Transactions B 2/2017 Go to the issue

Premium Partners