Top

Mechanics of Composite Materials

Published in:

18-05-2020

Influence of the Thickness of a Polymer Shell Applied to Surfaces of Submicron Filler Particles on the Properties of Polymer Compositions

Authors: A. A. Akhmadeev, E. A. Bogoslov, M. P. Danilaev, M. A. Klabukov, V. A. Kuklin

Published in: Mechanics of Composite Materials | Issue 2/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The results of studies into the influence of the thickness of a polystyrene shell applied to surfaces of dispersed corundum (Al₂O₃) filler particles on the structure and mechanical properties of the composition of an acrylonitrile butadiene styrene plastic are presented. It is shown that the mechanical properties of the composition depend at least on two factors: the interaction between shell molecules and the polymer matrix, and the ratio of shell thickness to the average size of submicron particles of the filler. The change in the mechanical properties of the composition is explained by the decreasing mobility of polymer macromolecules near the encapsulated filler particles due to the increasing adhesion of macromolecules to the polymer shell. It was shown experimentally that the Martens hardness, elastic modulus, tensile strength, and rupture strain can be changed in some range by varying the thickness of the polymer shell on the surfaces of corundum particles.

previous article Comparison of Glass-Transition Temperatures for Epoxy Polymers Obtained by Methods of Thermal Analysis

next article Structurally and Surface-Modified Alumina Particles as a Reinforcement in Polyester-Based Composites with an Improved Toughness

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

G. Schmidt and M. M. Malwitz, “Properties of polymer-nanoparticle composites,” Current Opinion in Colloid and Interface Science, 8, No. 1, 103–108 (2003).

M. S. Senthil Kumar, N. Mohana Sundara Raju, P. S. Sampath, and L. S. Jayakumari, “Effects of nanomaterials on polymer composites — an expatriate view,” Rev. Adv. Mater. Sci., 38, No. 1, 40–54 (2014). 3. T. F. Irzhak and V. I Irzhak, “Epoxy nanocomposites,” Vysokomolekular. Soed., Ser. A, 59, No. 6, 485–522 (2017).

N. Z. Lyakhov, V. E. Panin, D. V. Dudina, M. A. Korchagin, O. I. Lomovskii, Yu. V. Grinyaev, V. G. Durakov, S. V. Panin, and Yu. I. Pochivalov, “Development of structural materials based on nanocomposite powders, Part I,” Fiz. Mezomekhanika, 6, No. 3, 61–73 (2003).

O. Yu. Bogomolova, I. R. Biktagirova, M. P. Danilaev, M. A. Klabukov, Yu. E. Polsky, Saju Pillai, and A. A. Tsentsevitsky, Effect of adhesion between submicron filler particles and a polymeric matrix on the structure and mechanical properties of epoxy—resin—based compositions,” Mech. Compos. Mater., 53, No. 1, 117–122 (2017).

R. Abraham, S. P. Thomas, S.Kuryan, J. Isac, K. T. Varughese, and S. Thomas, “Mechanical properties of ceramicpolymer nanocomposites,” eXPRESS Polym. Lett., 3, No. 3, 177–189 (2009).CrossRef

D. Guo, G. X. Xie, and J. B. Luo, “Mechanical properties of nanoparticles: basics and applications,” J. Phys. D: Appl. Phys., 47, No. 1, 1–25 (2014). DOI:10.1088/0022–3727/47/1/013001

Surface Modification of Nanoparticle and Natural Fiber Fillers, Ed. Vikas Mittal. – Wiley&VCH Verlag GmbH & Co. KGaA, 2015. DOI:10.1002/9783527670260

A. Pakdel, Y. Bando, and D. Golberg, “Plasma-assisted interface engineering of boron nitride nanostructure films,” ACS Nano, 8, No. 10, 10631–10639 (2014).

Rajib Ghosh Chaudhuri and Santanu Paria, “Core/shell nanoparticles: classes, properties, synthesis mechanisms, characterization, and applications,” Chem. Rev., 112, No. 4, 2373–2433 (2012).

10.

J. G. Oh and H. S. Kim, “Synthesis of core-shell nanoparticles with a Pt nanoparticle core and a silica shell,” Current Applied Physics, 13, No. 1, 130–136 (2013).

11.

S. Amirchakhmaghi, A. Alavi Nia, G. Azizpour , and H. Bamdadi, “The effect of surface treatment of alumina nanoparticles with a silane coupling agent on the mechanical properties of polymer nanocomposites,” Mech. Compos. Mater., 51, No. 3, 347–358 (2015).CrossRef

12.

D. A. Chernous, S. V. Shil’ko, and S. V. Panin, “Analysis of the mechanical behaviour of a dispersedly reinforced nanocomposite. A method for calculating the effective elastic characteristics,” Fiz. Mezomekhanika, 13, No. 4, 85–90 (2010).

13.

Gutiérrez–Mejía, W. Herrera–Kao, S. Duarte–Aranda, M. I. Loría–Bastarrachea, G. Canché–Escamilla, F. J. Moscoso–Sánchez, J. V. Cauich–Rodríguez, and J. M. Cervantes, “Synthesis and characterization of core–shell nanoparticles and their influence on the mechanical behavior of acrylic bone cements,” Materials Sci. Eng. C, 33, No. 3, 1737–1743 (2013).

14.

M. Ziabka, M. Dziadek, and E. Menaszek, “Biocompatibility of poly (acrylonitrile–butadiene–styrene) nanocomposites modified with silver nanoparticles,” Polymers, 10, No. 11, 1257–1270 (2018).

15.

M. L. Wu, Sh. F. He, D. H. Li, and J. J. Fan, “Study on recycling ABS plastic/nano CaCO₃ /TiO₂ /POE modified composites,” IOP Conf. Ser.: Mater. Sci. Eng., 439, Part 2, 1162–1168 (2018).

16.

A. Abedini, T. Asiyabi, H. R. Campbell, R. Hasanzadeh, and T. Azdast, “On fabrication and characteristics of injection molded ABS/ Al₂O₃ nanocomposites,” Int. J. Advanced Manufacturing Technol., 102, Nos. 5–8, 1747–1758 (2019).

17.

V. N. Kuleznev and V. A. Shershnev, Polymer Chemistry and Physics [in Russian], Vysshaya Shkola, Moscow (1996).

18.

N. T. Kakhramanov and Sh. R. Bagirova, “The properties of nanocomposites based on styrene plastics,” Plast. Massy, Nos. 3–4, 5–9 (2015).

19.

N. G. Rambidi and A. V. Berezkin, Physical and Chemical Foundations of Nanotechnology, Fizmatlit, Moscow (2008).

20.

R. Falck, J. F. dos Santos, and S. T. Amancio–Filho, “Microstructure and mechanical performance of additively manufactured aluminum 2024–T3/ acrylonitrile butadiene styrene hybrid joints using an adjoining technique,” Materials, 12, No. 6, 864–890 (2019).

21.

M. P. Danilaev, N. V. Dorogov, F. A. Karamov, V. A. Kuklin, and A. V. Pushkareva, “Investigation of the characteristics of a device forming a low-speed two-phase gas flow with submicron-size solid particles,” Nauch. Tekhn. Vest. Povolzhja, No. 3, 74–77 (2019).

22.

B. J. Berne and R. Pecora, Dynamic Light Scattering with Applications to Chemistry, Biology and Physics, Willey-Intersci., New York (1976).

23.

S. Dul, L. Fambri, and A. Pegoretti, “Fused deposition modelling with ABS–graphene nanocomposites,” Composites, Pt. A, 85, 181–191 (2016).

24.

V. Kumar, J. R. Kumar, S. Aravindan, S. K. Malhotra, K. Vijai, and M. Shukla, “Fabrication and characterization of ABS nano composite reinforced by nano sized alumina particulates,” Int. J. Plastics Technol., 13, No. 2, 133–149 (2009).CrossRef

25.

S. Dul, A. Pegoretti, and L. Fambri, “Effects of the nanofillers on physical properties of acrylonitrile–butadiene–styrene nanocomposites: Comparison of graphene nanoplatelets and multiwall carbon nanotubes,” Nanomaterials, 8, No. 9, 674–692 (2018). doi:https://doi.org/10.3390/nano8090674

26.

M. E. J. Dekkers and D. Heikens, “Shear band formation in polycarbonate—glass bead composites,” J. Mater. Sci., 19, No. 10, 3271–3275 (1984).CrossRef

27.

M. P. Danilaev, O. Yu. Bogomolova, E. A. Bogoslov, S. A. Mikhailov, Yu. E. Pol’skii, and D. M. Pashin, “Encapsulation of submicron particles with polymer,” Nanotechnologies in Russia, 9, Nos. 11–12, 645–649 (2014).

28.

Physical and Chemical Processes in Gas Dynamics. A Computerized Handbook in 3 vols. V. 1: Dynamics of Physical and Chemical Processes in Gas and Plasma, Eds. G. G. Chernyi and S. A. Losev, [in Russian], Izd. Moscov. Univ. (1995).

Title: Influence of the Thickness of a Polymer Shell Applied to Surfaces of Submicron Filler Particles on the Properties of Polymer Compositions
Authors: A. A. Akhmadeev
E. A. Bogoslov
M. P. Danilaev
M. A. Klabukov
V. A. Kuklin
Publication date: 18-05-2020
Publisher: Springer US
Published in: Mechanics of Composite Materials / Issue 2/2020
Print ISSN: 0191-5665
Electronic ISSN: 1573-8922
DOI: https://doi.org/10.1007/s11029-020-09876-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2020

A Progressive FE Failure Model for Laminates under Biaxial Loading

Investigating the Effect of Chewing Force and an Abrasive Medium on the Wear Resistance of Composite Materials by Chewing Simulation

Structurally and Surface-Modified Alumina Particles as a Reinforcement in Polyester-Based Composites with an Improved Toughness

Numerical Modeling of Resonant Vibrations of an Elongate Plate with an Integral Damping Coating

Determining the Tensile Properties and Dispersion Characterization of CNTs in Epoxy Using Tem and Raman Spectroscopy

Some Conferences and Congresses

Premium Partners