Top

Published in:

2020 | OriginalPaper | Chapter

Mechanical Characterization of 60Pb40Sn Reinforced Al6061 Self-healing Composite

Authors : Nitin Kumar Gupta, Manoj Kumar, G. D. Thakre

Published in: Advances in Materials Science and Engineering

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The present study concentrates on the mechanical characterization of Al6061 self-healing metal matrix reinforced with low-melting points composite. It has been prepared by reinforcing low-melting point alloy in aluminum matrix. The self-healing characteristic has been obtained due to the presence of solder alloy. The developed material has been characterized using SEM and micrograph. The mechanical characteristics of the developed material have been determined experimentally by performing the tensile and Charpy tests. The comparison between self-healing composite with pure matrix material has been developed. And experimental assessment results show a reduction in tensile force as well as stress by 30%. Reduction by 50% in other properties like braking distance and strain in fabricated self-healing matrix. Similarly, in the case of the Charpy test, it reduces by 39% for self-healing samples as compared to pure aluminum sample.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Evaluation of Mechanical Properties of Carbon Fiber-Reinforced Multiwall Carbon Nanotube-Based Nanocomposites

next chapter A Brief Overview of Crystal Plasticity Approach for Computational Materials Modeling

Martinez Lucci, J., Rohtagi, P.: Design and Demonstration of Self-Healing Behavior in a Lead Free Solder Alloy. https://doi.org/10.2514/6.2009-4514

Bruck, H.A., Evans, J.J., Peterson, M.L.: The role of mechanism in biological and biologically inspired materials. Exp. Mech. 42(4), 361–371 (2002)CrossRef

Ferguson, J.B., Rohtagi, P.: Self-healing metals and metal matrix composites. Miner. Metals Mater. Soc. https://doi.org/10.1007/s11837-014-0912-4CrossRef

Ghosh, S.K.: Self-healing Materials: Fundamentals, Design Strategies, and Applications. ISBN: 978-3-527-31829-2

Lumely, R.: Self-healing materials: an alternative approach to 20 centuries of materials science, vol. 100, pp. 219–254. In: Van Der Zwaag, S. (ed.). Springer series in materials science (2007)

Alaneme, K.K., Bodurin, M.O.: Self-healing using metallic material systems—a review. https://doi.org/10.1016/j.apmt.2016.11.002CrossRef

Rohatgi, P.K., Dorri, A., Schultz, B.F., Ferguson, J.B.: Synthesis and properties of metal matrix Nano composites (MMNCS), syntactic foams, self-lubricating and self-healing metals. In: The Minerals, Metals & Materials Society, pp. 1515–1524 (2013)

Van der Zwaag, S., Van Dijk, N.H., Jonkers, H.M., Mookhoek, S.D., Sloof, W.G.: Self-healing Behavior in Man-Made Engineering Materials: Bio Inspired But Taking into Account Their Intrinsic Character. https://doi.org/10.1098/rsta.2009.0020CrossRef

Hautakangas, S., Schut, H., Van der Zwaag, S., del Castillo, P.R.D., Van Dijk, N.H.: The role of the aging temperature on the self healing kinetics in an under aged AA2024 aluminum alloy. In: Proceedings of the First International Conference on Self Healing Materials, 18–20 Apr 2007, Noordwijk aan Zee

10.

He, S.M., van Dijk, N.H., Schut, H., Peekstok, E.R., van der Zwaag, S.: Thermally Activated Precipitation at Deformation-Induced Defects in Fe-Cu and Fe-Cu-B-N Alloys Studied by Positron Annihilation Spectroscopy. https://doi.org/10.1103/physrevb.81.094103

11.

He, S.M., van Dijk, N.H., Paladugu, M., Schut, H., Kohl Brecher, J., Tichelaar, F.D., van der Zwaag, S.: In Situ Determination of Aging Precipitation in Deformed Fe-Cu and Fe-Cu B-N Alloys by Time-Resolved Small-Angle Neutron Scattering. https://doi.org/10.1103/physrevb.82.174111

12.

He, S.M., Brandhoff, P.N., Schut, H., van der Zwaag, S., van Dijk, N.H.: Positron Annihilation Study on Repeated Deformation/Precipitation Aging in Fe–Cu–B–N Alloys. https://doi.org/10.1007/s10853-013-7411-9CrossRef

13.

Zhang, S., Kohlbrecher, J., Tichelaar, F.D., Langelaan, G., Brück, E., van der Zwaag, S., van Dijk, N.H.: Defect-Induced Au Precipitation in Fe–Au and Fe–Au–B–N Alloys Studied by In Situ Small-Angle Neutron Scattering. https://doi.org/10.1016/j.actamat.2013.08

14.

Laha, K., Kyono, J., Shinya, N.: An Advanced Creep Cavitation Resistance Cu-Containing 18Cr–12Ni–Nb Austenitic Stainless Steel. https://doi.org/10.1016/j.scriptamat.2006.12.030CrossRef

15.

Alaneme, K.K., Omosule, O.I.: Experimental Studies of Self Healing Behavior of Under-Aged Al-Mg-Si Alloys and 60Sn-40Pb Alloy Reinforced Aluminum Metal-Metal Composites. https://doi.org/10.4236/jmmce.2015.31001CrossRef

16.

Lumley, N., Polmear, I.J.: Advances in self-healing of metals. In: Proceeding of the First International Conference on Self-Healing Materials, Noordwijkaan zee, The Netherlands, 18–20 Apr 2007

17.

Shinya, N., Kyono, J., Laha, K.: Self-healing Effect of Boron Nitride Precipitation on Creep Cavitation in Austenitic Stainless Steel. https://doi.org/10.1177/1045389x06065238CrossRef

18.

Lumley, R.N., Polmear, I.J., Morton, A.J.: Interrupted aging and secondary precipitation in aluminum alloys. Mater. Sci. Technol. 19, 1483–1490 (2003)CrossRef

19.

Manuel, M.V., Olson, G.B.: Biomimetic self-healing metals. In: Proceedings of 1st International Conference on Self-Healing Materials, Noordwijik aan Zee, The Netherlands, pp. 18–20 (2007)

20.

Ferguson, J.B., Schultz, B.F., Rohatgi, P.K.: Zinc alloy ZA-8/shape memory alloy self-healing metal matrix composite. Mater. Sci. Eng. A 620, 85–88 (2015)CrossRef

21.

Ferguson, J.B., Schultz, B.F., Rohatgi, P.K.: Self-healing metals and metal matrix composites. JOM 66(6), 866–871 (2014)CrossRef

22.

Manuel, M.V.: Principles of Self-healing in Metals and Alloys: An Introduction. https://doi.org/10.1002/9783527625376.ch8

23.

Bhattacharya, K.: Microstructure of martensite: why it forms and how it gives rise to the shape-memory effect. Rev. Contemp. Phys. 45, 528–529 (2004)

24.

Alaneme, K.K., Okotete, E.A.: Reconciling Viability and Cost-Effective Shape Memory Alloy Options—A Review of Copper and Iron Based Shape Memory Metallic Systems. https://doi.org/10.1016/j.jestch.2016.05.010CrossRef

25.

Birman, V.: Shape Memory Alloy Springs Used as Reduced Power/Weight Actuators. https://doi.org/10.1115/imece2004-60401

26.

Krishna Guntur, R., Amano, S., Martinez Lucci, J., Rohtagi, P.K.: Self-Healing Technology for Compressor and Turbine Blades. https://doi.org/10.1016/j.msea.2014.09.050CrossRef

27.

Rohatgi, P.K.: Al-Shape Memory Alloy Self-Healing Metal Matrix Composite. https://doi.org/10.1016/j.msea.2014.09.050CrossRef

28.

Martinez Lucci, J., Amano, R.S.: Design and Demonstration of Self-Healing Behavior in a Lead Free Solder Alloy. https://doi.org/10.2514/6.2009-4514

29.

Martinez Lucci, J., Amano, R.S., Rohtagi, P.K.: Self-Healing in an Aluminum Alloy Reinforced With Mircotubes. https://doi.org/10.1115/enic2008-53011

30.

Oladijo, O.P., Bodunrin, M.O., Sobiyi, K., Maledi, N.B., Alaneme, K.: Investigating the self-healing behavior of under-aged and 60Sn-40Pb alloy reinforced aluminum hybrid composites. Thin Solid Films 620, 201–205. https://doi.org/10.1016/j.tsf.2016.08.071CrossRef

31.

Zhang, S., Kohlbrecher, J., Tichelaar, F.D., Langelaan, G., Brück, E., van der Zwaag, S., van Dijk, N.H.: Defect-induced Au precipitation in Fe–Au and Fe–Au–B–N alloys studied by in situ small-angle neutron scattering. Acta Materialia 61, 7009–70019 (2013)CrossRef

32.

Lucci, J.M., Amano, R.S., Rohatgi, P., Schultz, B.F.: Experiment and Computational Analysis of Self-Healing in an Aluminum Alloy. https://doi.org/10.1007/12_2015_337CrossRef

33.

Birman, V.: Review of mechanics of shape memory alloy structures. Appl. Mech. Rev. 50, 629–645 (1997)CrossRef

34.

Gupta, N.K., Thakre, G.D., Kumar, M.: The mechanical and tribological characteristics of Al6061 self-healing materials. Mater. Res. Express 6(8), 0865d5 (2019). https://iopscience.iop.org/article/10.1088/2053-1591/ab23b1CrossRef

35.

Gupta, N.K., Thakre, G.D., Kumar, M.: Self-Healing Al 6061 Alloy Reinforced with Low Melting Point Alloys. https://doi.org/10.1007/978-981-13-6412-9_53

36.

Somani, N., Tyagi, Y.K., Kumar, P., Srivastava, V., Bhowmick, H.: Enhanced tribological properties of SiC reinforced copper metal matrix composites. Mater. Res. Express 6, 016549 (2019)CrossRef

Title: Mechanical Characterization of 60Pb40Sn Reinforced Al6061 Self-healing Composite
Authors: Nitin Kumar Gupta
Manoj Kumar
G. D. Thakre
Publisher: Springer Singapore
Book: Advances in Materials Science and Engineering
Print ISBN: 978-981-15-4058-5

Electronic ISBN: 978-981-15-4059-2

Copyright Year: 2020
DOI: https://doi.org/10.1007/978-981-15-4059-2_4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners