Issue 2/2019
Content (17 Articles)
Study on Dynamic Recrystallization Behaviors in a Hot-Deformed FB2 Ultra-supercritical Rotor Steel
Fei Chen, He Wang, Hongyang Zhu, Zhenshan Cui
Effects of Plastic Stress on Transformation Plasticity and Microstructure of a Carbide-Free Bainite Steel
Mengen Liu, Ying Ma, Guang Xu, Guangyu Cai, Mingxing Zhou, Xi Zhang
Investigation of the Aging Behavior of a Cu–Ni–Si Rolled Alloy
Paul Stavroulakis, Anagnostis Toulfatzis, Athanasios Vazdirvanidis, George Pantazopoulos, Spyros Papaefthymiou
The Effect of Carbon and Silicon Alloying Additions on the Morphology of Pores and Tensile Characteristics of Sintered Steels
Walid Khraisat, Wisam Abu Jadayil, Nathir Rawashdeh
Novel Degradation Mechanism of a Structural Wire Rope During Its Life Cycle
Kaushal Kishore, Goutam Mukhopadhyay
Modification of an Electroplated Nickel Interlayer Surface by Annealing Heat Treatment for Diamond Deposition on Tungsten Carbide
A. W. Hassan, M. Y. Noordin, S. Izman, K. Denni, E. M. Nazim
Microstructural Aspects of 304 Stainless Steel Weld Joints with the Simultaneous Application of Electromagnetic Vibration
Mohammad Amin Ghadam Dezfuli, Reza Dehmolaei, Seyed Reza Alavi Zaree
Comprehensive Microstructural Evaluation of Precipitation in Inconel 718
Davuluri Sindhura, Mantha Venkata Sravya, G. V. S. Murthy
Effects of Initial Austenite Grain Size on Microstructure and Mechanical Properties of 5% Nickel Cryogenic Steel
Tao Xiong, Guang Xu, Qing Yuan, Hai-jiang Hu, Jun-yu Tian
Effects of Quenching Temperature and Cooling Rate on the Microstructure and Mechanical Properties of U75V Rail Steel
Yuzhe Lan, Gang Zhao, Yaowen Xu, Chuanlong Ye, Shaocheng Zhang
Delta (δ) Ferrite Formation in the Welds of Aluminized 9Cr-1Mo Steels
A. B. Zala, N. I. Jamnapara, V. J. Badheka, C. Sasmal, S. Sam, M. Ranjan
Studies on Tool Shoulder Diameter of Dissimilar Friction Stir Welding Copper to Stainless Steel
Gaurang R. Joshi, Vishvesh J. Badheka
Root Cause Analysis of Failure in Superheater Tubes in a Power Plant
A. Bahrami, S. M. Rafiaei, M. Yazdan Mehr
Formation of Laves Phase in Sanicro 25 Austenitic Steel During Creep-Rupture Test at 700 °C
Jiao Suo, Zhifang Peng, Huachun Yang, Guocai Chai, Mingming Yu
Can You Identify the Microstructure?
Retraction Note to: Effect of Process Parameters on Tensile Strength of 1018 Mild Steel Joints Fabricated by Microwave Welding
Shashi Prakash Dwivedi, Satpal Sharma