Issue 1/2020
Special Issue on ISPS/MIPE 2018
Content (26 Articles)
The ISPS/MIPE 2018 editorial for the joint conference on Information Storage and Processing Systems and Micromechatronics for Information and Precision Equipment, San Francisco, California, USA
Kenji Fukuzawa, Shaomin Xiong, Yung-Kan Chen
Experimental study of lubricant depletion induced by pulsed laser irradiation heating in heat-assisted magnetic recording
Norio Tagawa, Hiroshi Tani, Yuki Uesaraie, Shinji Koganezawa, Renguo Lu
Aerodynamic drag reduction on a realistic vehicle using continuous blowing
Soo-Whang Baek, Sang Wook Lee
Minimization of mixed-color image noise caused by shape error of polygonal mirror in color-laser printing system
Hyun Choi, No-Cheol Park, Wan-Chin Kim
Numerical study on the effects of linear protrusion on flow-induced carriage excitation force in hard disk drives
Shinji Koganezawa, Shotaro Tsuda, Hiroshi Tani, Renguo Lu, Norio Tagawa
Understanding the final-state control from the standpoint of the model predictive control and its application to a three-dimensional trajectory control problem
Susumu Hara, Ryuya Yokoo, Kikuko Miyata
A study on the improvement of the cam phase control performance of an electric continuous variable valve timing system using a cycloid reducer and BLDC motor
SangWook Lee, Soo-Whang Baek
Design and simulation of an ultrasonic linear motor with dual piezoelectric actuators
Cheng-Ping Yang, Kun-Ju Xie, Jen-Yuan Chang
TOF-SIMS analysis of perfluoropolyether lubricant smear transferred from disk surface following laser heating
Hiroshi Tani, Yuta Shibahara, Reguo Lu, Shinji Koganezawa, Norio Tagawa
Characteristics of magnetic sensor with assembly errors in a rotary recording system
Heng-Sheng Hsiao, Li-Qing Chen, Cheng-Kuo Sung, Jen-Yuan (James) Chang
Detection of fluorescence from a mixed specimen consisting of micro particles attached to different fluorescent substances using a light waveguide incorporated optical TAS
Toshifumi Ohkubo, Nobuyuki Terada, Yoshikazu Yoshida
Robotic hand system design for mirror therapy rehabilitation after stroke
Shu-Wei Pu, Jen-Yuan Chang
Optical system design for light detection and ranging with ultra-wide field-of-view using liquid lenses
Hyun Choi, No-Cheol Park, Wan-Chin Kim
Assessment of the risk imposed by the presence of corroded shallow voids on the initialization and long-term reliability of hard disk drives
Abhishek Srivastava, Tom O’Dell, Istvan Boszormenyi
Stress distributions in an elastic body due to molecular interactions considering one-dimensional periodic material distribution based on Mindlin’s solution
Hiroshige Matsuoka, Toshiki Otani, Shigehisa Fukui
Laser-scanner-based object state estimation and tracking control algorithms of autonomous truck using single-wheel driving module
Taejun Song, Hyewon Lee, Kwangseok Oh
A low-power reference-less clock/data recovery for visible light communication devices requiring low data throughput
Ming-Cheng Liu, Eka Fitrah Pribadi, Paul C.-P. Chao, Rajeev Kumar Pandey
Advanced numerical analysis for vibration characteristics and ride comfort of ultra-high-speed maglev train
Hue Ha, Jungwan Park, Kyoung-Su Park
An efficient energy harvesting circuit for batteryless IoT devices
Ching-Cheng Yang, Rajeev Pandey, Tse-Yi Tu, Yuan-Po Cheng, Paul C.-P. Chao
Position error prediction using hybrid recurrent neural network algorithm for improvement of pose accuracy of cable driven parallel robots
Jung-Min Kang, Sung-Hyun Choi, Jung-wan Park, Kyoung-Su Park
Theoretical study on features of overlap-type and pressure-type sheet separation mechanisms
Kazushi Yoshida
A precise position measurement system of roll-to-roll printing using burst alignment patterns
Taehyeong Kim, Youngjin Kim, Jihyeon Kim, Byeongcheol Lee, Jimin Park, Dongho Oh
Model predictive control-based fault detection and reconstruction algorithm for longitudinal control of autonomous driving vehicle using multi-sliding mode observer
Sungyoul Park, Kwangseok Oh, Yonghwan Jeong, Kyongsu Yi
Printing pressure uniformization through adaptive feedforward control in roll-to-roll printing process
Jihyeon Kim, Youngjin Kim, Taehyeong Kim, Byeongcheol Lee, Jimin Park, Dongho Oh
Thermo-molecular gas-film lubrication (t-MGL) considering temperature distributions and accommodation coefficients: analyses by quasi-free-molecular t-MGL equation
Shigehisa Fukui, Fumiya Shinohara, Ryota Asada, Hiroshige Matsuoka