Top

Meccanica

Published in:

12-10-2020 | Original papers

Numerical analysis of secondary droplets characteristics due to drop impacting on 3D cylinders considering dynamic contact angle

Authors: Javad Alinejad, Mohammad Mohsen Peiravi

Published in: Meccanica | Issue 10/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This study is investigating three-dimensional numerical simulation of a Newtonian droplet impact and break on two square cylinders based on dynamic contact angle of droplet at the spatial interface between two solid–fluid phases. The droplet impact details and morphology studied in the present work could provide ideas for the spray wall impingement modeling in the simulation of many industrial applications, such as spray painting and liquid cooling of surfaces. The droplet impact is investigated on two square cylinders in 9 different modes with different droplet diameters and physical conditions such as different positions of droplet. The volume of fluid (VOF) method was used with open-source software. The results have been compared and validated quantitatively and qualitatively with the experimental results. Results represent droplet diameter into cylinder dimension and velocity profiles are affected on number of broken droplets, break times and droplet deformation. Also, mean velocities of droplet after impact on two square cylinders at first break time were 0, 0.025, 0.12, 0.47, 0.11, 0.08, 0.2, 0.012, 0.19 m/s for cases 1–9, respectively. Moreover, in case 7 that droplet diameter into cylinder dimension was 2, the maximum number of break-up into secondary droplets was 10 drops that occurred for 4 times.

previous article An analysis method of the vortex-induced vibrations of a tethered sphere

next article Effect of gravity modulation on linear, weakly-nonlinear and local-nonlinear stability analyses of stationary double-diffusive convection in a dielectric liquid

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Liu H (2000) Science and engineering of droplets, 1st edn. Noyes Publications, William Andrew Publishing, Norwich, New York, USA

Jalal M (2012) Direct numerical simulation of fragmentation of droplets. University of British Columbia, M.Sc. Thesis

Pilch M, Erdman CA (1987) Use of breakup time data and velocity history data to predict the maximum size of stable fragments for acceleration-induced breakup of a liquid drop. Int J Multiph Flow 13(6):741–757. https://doi.org/10.1016/0301-9322(87)90063-2CrossRef

Krzeczkowski SA (1980) Measurement of liquid droplet disintegration mechanism. Int J Multiph Flow 6(3):227–239. https://doi.org/10.1016/0301-9322(80)90013-0CrossRef

Chou WH, Hsiang LP, Faeth GM (1997) Temporal properties of drop breakup in the shear breakup regime. Int J Multiph Flow 23(4):651–669. https://doi.org/10.1063/1.4803154CrossRefMATH

Chou WH, Faeth GM (1998) Temporal properties of secondary drop breakup in the bag breakup regime. Int J Multiph Flow 24(6):889–912. https://doi.org/10.1016/S0301-9322(98)00015-9CrossRefMATH

Dai Z, Faeth GM (2001) Temporal properties of secondary drop breakup in the multimode breakup regime. Int J Multiph Flow 27(2):217–236. https://doi.org/10.1016/S0301-9322(00)00015-XCrossRefMATH

Cao XK, Sun ZG, Li WF, Liu HF, Yu ZH (2007) A new breakup regime of liquid drops identified in a continuous and uniform air jet flow. Phys Fluids 19(5):057103. https://doi.org/10.1016/j.matcom.2009.11.003CrossRefMATH

Guildenbecher DR, López-Rivera C, Sojka PE (2009) Secondary atomization. Exp Fluids 46(3):371–402. https://doi.org/10.1007/s00348-008-0593-2CrossRef

10.

Reyssat E, Chevy F, Biance AL, Petitjean L, Quere D (2007) Shape and instability of free-falling liquid globules. Europhys Lett 80(3):34005. https://doi.org/10.1209/0295-5075/80/34005CrossRef

11.

Li H, Rosebrock CD, Riefler N, Wriedt T, Mädler L (2019) Experimental investigations on the effects of water vapor and oxygen concentrations in the ambience on the burning constant, lifetime and residuals of single isolated xylene, isobutanol and ethanol droplets. Exp Thermal Fluid Sci 109(1):109920. https://doi.org/10.1016/j.expthermflusci.2019.109920CrossRef

12.

Nampoothiri KN, Bobji MS, Sen P (2019) Generation of micron-sized droplet streams by high frequency electric field. Int J Heat Mass Transf 145(1):118709. https://doi.org/10.1016/j.ijheatmasstransfer.2019.118709CrossRef

13.

Pandey K, Basu S (2019) High vapor pressure nanofuel droplet combustion and heat transfer: insights into droplet burning time scale, secondary atomization and coupling of droplet deformations and heat release. Combust Flame 209(2):167–179. https://doi.org/10.1016/j.combustflame.2019.07.043CrossRef

14.

Park J, Kim DE (2019) Droplet dynamics on superheated surfaces with circular micro pillars. Int J Heat Mass Transf 142(1):118459. https://doi.org/10.1016/j.ijheatmasstransfer.2019.118459CrossRef

15.

Zhengyuan LH, Bai LB (2019) Release of a trapped droplet in a single micro pore throat. J Colloid Interface Sci 554(1):1–8. https://doi.org/10.1016/j.jcis.2019.06.089CrossRef

16.

Lejeune S, Gilet T (2019) Drop impact close to the edge of an inclined substrate: liquid sheet formation and breakup. Phys Rev Fluids 4(5):053601. https://doi.org/10.1103/PhysRevFluids.4.053601CrossRef

17.

Visser CW, Frommhold PhE, Wildeman S, Mettin R, Lohse D, Sun C (2015) Dynamics of high-speed micro-drop impact: numerical simulations and experiments at frame-to-frame times below 100 ns. Soft Matter 11(9):1708–1722. https://doi.org/10.1039/C4SM02474ECrossRef

18.

Villermaux E, Bossa B (2009) Single-drop fragmentation determines size distribution of raindrops. Nat Phys 5(1–2):697–702. https://doi.org/10.1038/nphys1340CrossRef

19.

Fakhari A, Rahimian MH (2009) Simulation of falling droplet by the lattice boltzmann method. Commun Nonlinear Sci Numer Simul 14(7):3046–3055. https://doi.org/10.1016/j.cnsns.2008.10.017CrossRefMATH

20.

Fakhari A, Rahimian MH (2011) Investigation of deformation and breakup of a falling droplet using a multiple-relaxation-time lattice Boltzmann method. Comput Fluids 40(1):156–171. https://doi.org/10.1016/j.compfluid.2010.08.020CrossRefMATH

21.

Domairry Ganji D, Peiravi MM, Abbasi M (2015) Evaluation of the heat transfer rate increases in retention pools nuclear waste. Int J Nano Dimens 6(4):385–398. https://doi.org/10.7508/IJND.2015.04.007CrossRef

22.

Peiravi MM, Alinejad J, Domairry Ganji D, Maddah S (2019) Numerical study of fins arrangement and nanofluids effects on three-dimensional natural convection in the cubical enclosure. Transp Phenom Nano Micro Scales 7(2):97–112. https://doi.org/10.22111/TPNMS.2019.4845CrossRef

23.

Peiravi MM, Alinejad J, Domairry Ganji D, Maddah S (2019) 3D optimization of baffle arrangement in a multi-phase nanofluid natural convection based on numerical simulation. Int J Numer Methods Heat Fluid Flow. https://doi.org/10.1108/hff-01-2019-0012CrossRef

24.

Peiravi MM, Alinejad J (2019) Hybrid conduction, convection and radiation heat transfer simulation in a channel with rectangular cylinder. J Therm Anal Calorim. https://doi.org/10.1007/s10973-019-09010-0CrossRef

25.

Alinejad J, Fallah K (2016) Taguchi optimization approach for three-dimensional nanofluid natural convection in a transformable enclosure. J Thermophys Heat Transf 31(1):1–7. https://doi.org/10.2514/1.T4894CrossRef

26.

Fallah K, Gerdroodbary MB, Ghaderi A, Alinejad J (2018) The influence of micro air jets on mixing augmentation of fuel in cavity flameholder at supersonic flow. Aerosp Sci Technol 76(1):187–193. https://doi.org/10.1142/s0129183109014163CrossRef

27.

Alinejad J, Esfahani JA (2017) Taguchi design of three dimensional simulations for optimization of turbulent mixed convection in a cavity. Meccanica 52(4–5):925–938. https://doi.org/10.1007/s11012-016-0436-9MathSciNetCrossRefMATH

28.

Alinejad J, Esfahani JA (2018) Optimization of 3-D natural convection around the isothermal cylinder using Taguchi method. Transp Phenom Nano Micro Scales 6(1):49–59. https://doi.org/10.22111/tpnms.2018.3522CrossRef

29.

Asadi Z, Peiravi MM, Domairry Ganji D (2017) Survey of nano-bio convection flow in a horizontal channel by using AGM and FlexPDE software. In: 3rd conference of heat and mass transfer, Amol

30.

Asadi Z, Peiravi MM, Domairry Ganji D (2017) Survey and analysis of the thermal flux of a nanofluid droplet with a variable conductive coefficient in the cooling of nuclear reactors. In: 1st international conference on modern technologies in science, Amol

31.

Domairry Ganji D, Peiravi MM, Abbasi M (2014) Survey on increasing the heat transfer rate in spent fuel (nuclear wastes) pool with free convection boundary layer flow on a vertical cone in a porous medium for newtonian nanofluid with application of homotopy analysis method (HAM). In: 8th international conference on new advances in engineering sciences, Amol

32.

Aliyari F, Peiravi MM, Domairry Ganji D (2017) Analysis of non-Newtonian nanofluid natural convection flow, sodium alginate (SA) between two vertical flat plates. Publication description 17th Fluid Dynamics Conference, Shahrood

33.

Ni MJ, Komorib S, Morley NB (2006) Direct simulation of falling droplet in a closed channel. Int J Heat Mass Transf 49(1–2):366–376. https://doi.org/10.1016/j.ijheatmasstransfer.2005.03.025CrossRefMATH

34.

Feng JQ (2010) A deformable liquid drop falling through a quiescent gas at terminal velocity. J Fluid Mech 658(1):438–462. https://doi.org/10.1017/S0022112010001825CrossRefMATH

35.

Gottesdiener L, Gueyffier D, Abdelouah M, Gatignol R, Zaleski S (2004) Numerical simulations of large falling drops. Int J Numer Meth Fluids 45(1):109–123. https://doi.org/10.1002/fld.489CrossRefMATH

36.

Han J, Tryggvason G (1999) Secondary breakup of axisymmetric liquid drops. I. Acceleration by a constant body force. Phys Fluids 11(12):36–50. https://doi.org/10.1063/1.870229CrossRefMATH

37.

Tryggvason G, Bunner B, Esmaeeli A, Juric D, Al-Rawahi N, Tauber W, Han J, Nas S, Janz YJ (2001) A front-tracking method for the computations of multiphase flow. J Comput Phys 169(1):708–759. https://doi.org/10.1006/jcph.2001.6726MathSciNetCrossRefMATH

38.

Harlow FH, Shannon JP (1967) The splash of a liquid droplet. J Appl Phys 38(1):3855. https://doi.org/10.1063/1.1709031CrossRef

39.

Welch JE, Harlow FH, Shannon JP, Daly BJ (1965) The MAC method. Technical Report LA-3425, Los Alamos Scientific Lab., University of California, N. Mex

40.

Foote GB (1975) The water drop rebound problem: dynamics of collision. J Atmos Sci 32(1):390. https://doi.org/10.1175/1520-0469(1975)032%3c0390:TWDRPD%3e2.0.CO;2CrossRef

41.

Tsurutani K, Yao M, Senda J, Fujimoto H (1990) Numerical analysis of the deformation process of a droplet impinging upon a wall. JSME Int J Ser 2 Fluids Eng Heat Transf Power Combust Thermophys Prop 33(3):555–561. https://doi.org/10.1299/jsmeb1988.33.3_555CrossRef

42.

Trapaga G, Szekely J (1991) Mathematical modeling of the isothermal impingement of liquid droplets in spraying processes. Metall Mater Trans B 22(6):901–914. https://doi.org/10.1016/j.molliq.2016.12.004CrossRef

43.

FLOW-3D (1988) Computational modeling power for scientists and engineers. Technical Report FSI-88-00-1, Flow Science, Inc., San Diego, CA

44.

Hirt CW, Nichols BD (1981) Volume of fluid (VOF) method for the dynamics of free boundaries. J Comput Phys 39(1):201–225. https://doi.org/10.1016/0021-9991(81)90145-5CrossRefMATH

45.

Kothe BD, Mjolsness RC, Torrey MD (1991) RIPPLE: a computer program for incompressible flows with free surfaces. Technical Report LA-12007-MS, Los Alamos Scientific Lab., University of California, N. Mex. https://doi.org/10.13140/rg.2.1.1397.5200

46.

Fukai J, Shiiba Y, Yamamoto T, Miyatake O, Poulikakos D, Megaridis CM, Zhao Z (1995) Wetting effects on the spreading of a liquid droplet colliding with a at surface: experiment and modeling. Phys Fluids 7(2):236. https://doi.org/10.1063/1.868622CrossRef

47.

Fukai J, Zhao Z, Poulikakos D, Megaridis CM, Miyatake O (1993) Modeling of the deformation of a liquid droplet impinging upon a flat surface. Phys Fluids 5(11):2588. https://doi.org/10.1063/1.858724CrossRefMATH

48.

Pasandideh-Fard M, Qiao YM, Chandra S, Mostaghimi J (1996) Capillary effects during droplet impact on a solid surface. Phys Fluids 8(3):650. https://doi.org/10.1063/1.868850CrossRef

49.

Liu H, Cai W, Rangel RH, Lavernia EJ (1995) Numerical and experimental study of porosity evolution during plasma spray deposition of W. Sci Technol Rapid Solidifi Process 278(2):73–107. https://doi.org/10.1007/s10973-018-7380-yCrossRef

50.

Bertagnolli M, Marchese M, Jacucci G, Doltsinis IS, Noelting S (1997) Thermomechanical simulation of the splashing of ceramic droplets on a rigid substrate. J Comput Phys 133(2):205–221. https://doi.org/10.1006/jcph.1996.5468CrossRefMATH

51.

Bussmann M, Mostaghimi J, Chandra S (1999) On a three-dimensional volume tracking model of droplet impact. Phys Fluids 11(6):1406–1417. https://doi.org/10.1063/1.870005CrossRefMATH

52.

Pasandideh-Fard M, Bussmann M, Chandra S, Mostaghimi J (2001) Simulating Droplet Impact On a Substrate of Arbitrary Shape. Atomization Sprays 11(4):397–414. https://doi.org/10.1615/AtomizSpr.v11.i4.60CrossRef

53.

Xavier T, Zuzio D, Averseng M, Estivalezes JL (2019) Toward direct numerical simulation of high speed droplet impact. Meccanica. https://doi.org/10.1007/s11012-019-00980-xCrossRef

54.

Mirhoseini MS, Boroomand M (2018) Control of wetness fraction and liquid droplet size in wet steam two phase flows with hot steam injection. Meccanica 53(1–2):193–207. https://doi.org/10.1007/s11012-017-0729-7CrossRef

55.

Asadollahi A, Rashidi S, Esfahani JA (2018) Simulation of liquid reaction and droplet formation on a moving micro-object by lattice Boltzmann method. Meccanica 53(4–5):803–815. https://doi.org/10.1007/s11012-017-0780-4CrossRef

56.

Burzynski DA, Bansmer SE (2017) High speed visualization of droplets impacting with a dry surface at high weber numbers. New Results Numer Exp Fluid Mech XI 136:511–521. https://doi.org/10.1007/978-3-319-64519-3_46CrossRef

57.

Cimpeanu R, Papageorgiou DT (2018) Three-dimensional high speed drop impact onto solid surfaces at arbitrary angles. Int J Multiph Flow 107:192–207. https://doi.org/10.1016/j.ijmultiphaseflow.2018.06.011CrossRef

58.

Pasandideh-Fard M (2007) Droplet impact and solidification in a thermal spray process. Ph.D. Thesis, University of Toronto, Toronto, Ontario, Canada

59.

Poo YJ, Ashgriz N (1992) Numerical simulation of collision of two-dimensional drops. In: Proceedings of the 5th annual conference on liquid atomization and spray systems, San Ramon, California, May 18–20, pp 110–115

60.

Lorenceau E, Clanet C, Quéré D (2004) Capturing drops with a thin fiber. J Colloid Interface Sci 279(1):192–197. https://doi.org/10.1016/j.jcis.2004.06.054CrossRef

61.

Contal P, Simao J, Thomas D, Frising T, Call S, Appert-Collin JC, Bemer D (2004) Clogging of fiber filters by submicron droplets. Phenomena and influence of operating conditions. J Aerosol Sci 35(2):263–278. https://doi.org/10.1016/j.jaerosci.2003.07.003CrossRef

62.

Chen B, Wang B, Mao F, Tian R, Lu C (2020) Analysis of liquid droplet impacting on liquid film by CLSVOF. Ann Nucl Energy 143:107468. https://doi.org/10.1016/j.anucene.2020.107468CrossRef

Title: Numerical analysis of secondary droplets characteristics due to drop impacting on 3D cylinders considering dynamic contact angle
Authors: Javad Alinejad
Mohammad Mohsen Peiravi
Publication date: 12-10-2020
Publisher: Springer Netherlands
Published in: Meccanica / Issue 10/2020
Print ISSN: 0025-6455
Electronic ISSN: 1572-9648
DOI: https://doi.org/10.1007/s11012-020-01240-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 10/2020

Effect of gravity modulation on linear, weakly-nonlinear and local-nonlinear stability analyses of stationary double-diffusive convection in a dielectric liquid

Natural frequencies of rotating twisted beams: a perturbation method based approach

In memory of Professor Raffaele Casciaro

Approximation of the Stokes eigenvalue problem on triangular domains using a stabilized finite element method

Modified couple stress theory for three-dimensional elasticity in curvilinear coordinate system: application to micro torus panels

The vibro-impact capsule system in millimetre scale: numerical optimisation and experimental verification

Premium Partners