Issue 12/2017
Content (27 Articles)
Synergistic effect of silver nanoparticle content on the optical and thermo-mechanical properties of poly(l-lactic acid)/glycerol triacetate blends
Homero Salas-Papayanopolos, Ana B. Morales-Cepeda, Saúl Sanchez, Pierre G. Lafleur, I. Gomez
Ion conducting nano-composite polymer electrolytes: synthesis and ion transport characterization
Angesh Chandra
Fabrication of covalently bonded nanostructured thin films of epoxy resin and polydimethylsiloxane for oil adsorption
Sadia Batool, Anum Mahmood, Rohama Gill, Shahid Saeed Qureshi, Muhammad Mazhar, Mohamed Bououdina
Influence of processing conditions on the mechanical properties of SEBS/PP/oil blends
Daiane Tomacheski, Michele Pittol, Carlos E. Ermel, Douglas N. Simões, Vanda F. Ribeiro, Ruth M. C. Santana
Combined effect of nucleating agent and plasticizer on the crystallization behaviour of polylactide
Jon Anakabe, A. M. Zaldua Huici, Arantxa Eceiza, Aitor Arbelaiz, Luc Avérous
Studies on electrochemical properties of poly (ethylene oxide)-based gel polymer electrolytes with the effect of chitosan for lithium–sulfur batteries
A. J. Nagajothi, R. Kannan, S. Rajashabala
Alginate/gelatin crosslinked system through Maillard reaction: preparation, characterization and biological properties
Loucif Khadidja, Chetouani Asma, Bounekhel Mahmoud, Elkolli Meriem
In situ polymerisation and characteristic properties of the waterborne graphene oxide/poly(siloxane-urethane)s nanocomposites
Maw-Cherng Suen, Jia-Hao Gu, Hsun-Tsing Lee, Cheng-Lung Wu, Chien-Shiun Liao, Jia-Jyun Yang
Optimization of controlled ring-opening polymerization of l-lactide to hydroxyl terminated polylactides using zinc acetate catalyst
Sheetal Monga, Anupama Kaushik, Bhuvanesh Gupta
Study on calcium fluoride modified graphene/brominated butyl rubber nanocomposites
Xinya Yang, Yong Zhang, Yan Xu, Steven Gao, Sharon Guo
Structure and properties of polycaprolactone/ibuprofen rods prepared by melt extrusion for implantable drug delivery
G. V. Salmoria, F. Sibilia, V. G. Henschel, S. Fare, M. C. Tanzi
Microton irradiation induced tuning of dielectric properties of nano ZnO–natural rubber disks
Deepu Thomas, K. A. Vijayalakshmi, Jobin Job Mathen, Simon Augustine, Deepalekshmi Ponnamma, Kishor Kumar Sadasivuni, John-John Cabibihan
Synthesis of cellulose/silica gel polymer hybrids via in-situ hydrolysis method
Takeru Iwamura, Kenzo Akiyama, Taiki Hakozaki, Masahiro Shino, Kaoru Adachi
A comparative study of new linear and hyperbranched polyurethanes built up from a synthesized isocyanate-terminated polyester/urethane
Samir M. M. Morsi, Heba A. Mohamed
Synthesis, characterization and application of a novel zinc(II) ion-imprinted polymer
Marzena Joanna Kuras, Karolina Perz, Wacław Lechosław Kołodziejski
UV-curable hyperbranched urethane acrylate oligomers modified with different fatty acids
Zhen Jiao, Qianqian Yang, Xianwei Wang, Chenchen Wang
The excellent gas barrier properties and unique mechanical properties of poly(propylene carbonate)/organo-montmorillonite nanocomposites
Junjun Kong, Zonglin Li, Zenwen Cao, Changyu Han, Lisong Dong
Change of thermal properties of polyamide-6,6/glass fiber composite by the addition of nigrosine
Seung Hun Yang, Sang Hun Cha, Jae Ik Kim, Min Ho Lee, Sang Gu Kim, Sung Hun Ryu
Optimization of the vulcanization parameters for ethylene–propylene–diene termonomer (EPDM)/ground waste tyre composite using response surface methodology
İsmail Kutlugün Akbay, Ahmet Güngör, Tonguç Özdemir
The production and characterization of poly(lactic acid) fibers dyeable with anionic dyes using octaammonium polyhedral oligomeric silsesquioxane nanoparticle
Onur Baykus, Asım Davulcu, Mehmet Dogan
Evaluation of whey protein isolate-graft-carbopol-polyacrylamide pH-sensitive composites for controlled release of pamidronate
B. A. Aderibigbe, S. Ndwabu
Rheological properties of acrylamide/butyl acrylate/2-acrylamido-2-methyl-1-propane sulfonic acid co- and terpolymers synthesized by heterogeneous and micellar methods
Hossein Khakpour, Mahdi Abdollahi
Real-time polymerization monitoring in a dual-cured resin cement by magnetic resonance
Bruno Luiz Santana Vicentin, Antonio Marchi Netto, Luiz Henrique Dall’Antonia, Eduardo Di Mauro, Bernhard Blümich
Biological properties and enzymatic degradation studies of clindamycin-loaded PLA/HAp microspheres prepared from crocodile bones
Juntima Pradid, Wirunya Keawwatana, Upsorn Boonyang, Siree Tangbunsuk
Novel sulfonated poly(glycidyl methacrylate) grafted Nafion membranes for fuel cell applications
M. S. Mohy Eldin, A. A. Nassr, A. B. Kashyout, E. A. Hassan
Post-electrospinning thermal treatments on poly(4-methyl-1-pentene) nanofiber membranes for improved mechanical properties
Jatoi Abdul Wahab, Hoik Lee, Kai Wei, Tomoki Nagaishi, Zeeshan Khatri, Bijoy K. Behera, Kyu-Beom Kim, Ick Soo Kim
Use of apple seeds as new source for synthesis of polyacrylonitrile-based adsorbent to remove Pb(II)
Dongcheng Yang, Lili Yu, Hou Chen, Yanbo Yu, Yuanyuan Xu, Jinming Sun, Yating Wang