Top

Journal of Materials Engineering and Performance

Published in:

05-05-2023 | Technical Article

Prediction of Flow Behavior and Deformation Analysis of AA5754 Sheet Metal at Warm and Hot Temperatures

Authors: Nuri Şen, Tolgahan Civek, Ömer İlhan, Özgür Erdem Yurt, M. Hüseyin Çetin, Hamza Şimşir

Published in: Journal of Materials Engineering and Performance | Issue 7/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The utilization of lightweight materials such as AA5754 aluminum alloys in the inner body panel parts of vehicles has been significantly important for automotive manufacturers to minimize the high fuel consumption by reducing the overall weight. In this study, the flow behavior of AA5754 sheet metal has been discussed by conducting uniaxial tensile tests at five different temperatures (RT, 200, 250, 300, 350 °C) and three strain rates (0.001, 0.01, 0.05 s⁻¹). Additionally, the capability of Fields and Backofen (F&B) and Voce hardening rules in describing the flow behavior of AA5754 at different temperatures and strain rates has been investigated by conducting uniaxial tensile tests in finite element analysis. It has been found that the main deformation mechanisms for the AA5754 are the strain hardening mechanism up to 250 °C, strain hardening and dynamic recovery mechanisms at 300 °C, dynamic recrystallization and strain hardening mechanisms at 350 °C. While the F&B hardening rule has been able to successfully capture the flow behavior of AA5754 up to 250 °C with a 14.36% error, its capability has significantly reduced after 250 °C due to its incapability of describing the effects of dynamic recovery and recrystallization. Voce hardening model has been better able to describe the flow behavior of AA5754 at all the temperature levels than F&B model due to its saturation behavior.

previous article Molecular Dynamics Study of SiC Nanoparticle Effect on Crack Growth in Ti-6Al-4V Alloy

next article Modeling the Double-Pass Flow Curve of Nb Micro-Alloyed Steel by Machine Learning and its Extrapolation to Static Softening Kinetics

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

W. Zhuang, J. Sun, P. Wang, and D. Xie, Anisotropic Damage Constitutive Model of AA5754 Aluminum Alloy Considering Warm Forming History, Mater. Today Commun., 2022, 31, p 103329. https://doi.org/10.1016/j.mtcomm.2022.103329CrossRef

Z. Gronostajski et al., Recent Development Trends in Metal Forming, Arch. Civ. Mech. Eng., 2019, 19(3), p 898–941. https://doi.org/10.1016/j.acme.2019.04.005CrossRef

P.J. Bolt, N.A.P.M. Lamboo and P.J.C.M. Rozier, Feasibility of Warm Drawing of Aluminium Products, J. Mater. Process. Technol., 2001, 115(1), p 118–121. https://doi.org/10.1016/S0924-0136(01)00743-9CrossRef

S.S. Panicker, and S.K. Panda, Improvement in Material Flow during Nonisothermal Warm Deep Drawing of Nonheat Treatable Aluminum Alloy Sheets, J. Manuf. Sci. Eng. Trans. ASME, 2017, 139, p 3. https://doi.org/10.1115/1.4034594CrossRef

C.Q. Huang, J. Deng, S.X. Wang, and L. Lei Liu, A Physical-Based Constitutive Model to Describe the Strain-Hardening and Dynamic Recovery Behaviors of 5754 Aluminum Alloy, Mater. Sci. Eng. A, 2017, 699, p 106–113. https://doi.org/10.1016/j.msea.2017.04.086CrossRef

Y. Feng, S. Mandal, B. Gockel and A.D. Rollett, Extension of the Mechanical Threshold Stress Model to Static and Dynamic Strain Aging Application to Over AA5754-O, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2017, 48(11), p 5591–5607. https://doi.org/10.1007/s11661-017-4276-6CrossRef

D. Li, and A.K. Ghosh, Biaxial Warm Forming Behavior of Aluminum Sheet Alloys, J. Mater. Process. Technol., 2004, 145(3), p 281–293. https://doi.org/10.1016/j.jmatprotec.2003.07.003CrossRef

V. Charkhesht, and M. Kazeminezhad, Deformation Behavior of Severely Deformed Al and Related Mechanisms Through Warm Tensile Test, J. Mater. Eng. Perform., 2017, 26(3), p 1311–1324. https://doi.org/10.1007/s11665-017-2504-2CrossRef

M. Bueno et al., Strain Rate Effect on the Fracture Behavior of the AA5754 Aluminum Alloy, Procedia Manuf., 2020, 47(2019), p 1264–1269. https://doi.org/10.1016/j.promfg.2020.04.212CrossRef

10.

S.S. Panicker, and S.K. Panda, Formability Analysis of AA5754 Alloy at Warm Condition: Appraisal of Strain Rate Sensitive Index, Mater. Today Proc., 2015, 2(4–5), p 1996–2004. https://doi.org/10.1016/j.matpr.2015.07.169CrossRef

11.

G. Palumbo et al., Warm Forming of an AA5754 Component for Railway Vehicle Applications, Procedia Eng., 2017, 183, p 351–356. https://doi.org/10.1016/j.proeng.2017.04.051CrossRef

12.

F. Pourboghrat, S. Venkatesan and J.E. Carsley, LDR and Hydroforming Limit for Deep Drawing of AA5754 Aluminum Sheet, J. Manuf. Process., 2013, 15(4), p 600–615. https://doi.org/10.1016/j.jmapro.2013.04.003CrossRef

13.

M. Türköz, Ö.N. Cora, H. Gedikli, M. Dilmeç, H.S. Halkacı and M. Koç, Numerical Optimization of Warm Hydromechanical Deep Drawing Process Parameters and its Experimental Verification, J. Manuf. Process., 2020, 57(June), p 344–353. https://doi.org/10.1016/j.jmapro.2020.06.020CrossRef

14.

A. He, G. Xie, H. Zhang and X. Wang, A Comparative Study on Johnson-Cook, Modified Johnson-Cook and Arrhenius-type Constitutive Models to Predict the High Temperature Flow Stress in 20CrMo Alloy Steel, Mater. Des., 2013, 52, p 677–685. https://doi.org/10.1016/j.matdes.2013.06.010CrossRef

15.

Y.J. Qin, Q.L. Pan, Y. Bin He, W. Bin Li, X.Y. Liu and X. Fan, Modeling of Flow Stress for Magnesium Alloy during Hot Deformation, Mater. Sci. Eng. A, 2010, 527(10–11), p 2790–2797. https://doi.org/10.1016/j.msea.2010.01.035CrossRef

16.

S. Mandal, V. Rakesh, P.V. Sivaprasad, S. Venugopal and K.V. Kasiviswanathan, Constitutive Equations to Predict High Temperature Flow Stress in a Ti-modified Austenitic Stainless Steel, Mater. Sci. Eng. A, 2009, 500(1–2), p 114–121. https://doi.org/10.1016/j.msea.2008.09.019CrossRef

17.

J. Lv, J.H. Zheng, V.A. Yardley, Z. Shi and J. Lin, A Review of Microstructural Evolution and Modelling of Aluminium Alloys under Hot Forming Conditions, Metals (Basel), 2020, 10(11), p 1–33. https://doi.org/10.3390/met10111516CrossRef

18.

H.S. Halkaci, M. Turkoz and M. Dilmec, Enhancing Formability in Hydromechanical Deep Drawing Process Adding a Shallow Drawbead to the Blank Holder, J. Mater. Process. Technol., 2014, 214(8), p 1638–1646. https://doi.org/10.1016/j.jmatprotec.2014.03.008CrossRef

19.

R. Amaral, P. Teixeira, E. Azinpour, A.D. Santos and J. Cesar De Sa, Evaluation of Ductile Failure Models in Sheet Metal Forming, MATEC Web Conf., 2016, 80, p 1–6. https://doi.org/10.1051/matecconf/20168003004CrossRef

20.

Z. He, Z. Wang, Y. Lin and X. Fan, Hot Deformation Behavior of a 2024 Aluminum Alloy Sheet and its Modeling by Fields-Backofen Model Considering Strain Rate Evolution, Metals (Basel), 2019 https://doi.org/10.3390/met9020243CrossRefPubMedCentral

21.

D.J. Lloyd, and H. Jin, Inhomogeneous Yielding and Work Hardening of a Fine Grained Al-Mg Alloy, Mater. Sci. Eng. A, 2013, 585, p 455–459. https://doi.org/10.1016/j.msea.2013.07.044CrossRef

22.

E. Cyr, M. Mohammadi, A. Brahme, R.K. Mishra and K. Inal, Modeling the Formability of Aluminum Alloys at Elevated Temperatures using a New Thermo-Elasto-Viscoplastic Crystal Plasticity Framework, Int. J. Mech. Sci., 2017, 128–129, p 312–325. https://doi.org/10.1016/j.ijmecsci.2017.05.005CrossRef

23.

N. Abedrabbo, F. Pourboghrat and J. Carsley, Forming of AA5182-O and AA5754-O at Elevated Temperatures using Coupled Thermo-Mechanical Finite Element Models, Int. J. Plast., 2007, 23, p 841–875. https://doi.org/10.1016/j.ijplas.2006.10.005CrossRef

24.

Q. Yu, P.A. Greaney, T.M. Evans and J.J. Kruzic, A Critical Dislocation Velocity for Serration Mechanism Transition in a Nickel-Chromium Solid Solution Alloy, Int. J. Plast., 2021, 145(June), p 103071. https://doi.org/10.1016/j.ijplas.2021.103071CrossRef

25.

Y.B. He, Q.L. Pan, Q. Chen, Z.Y. Zhang, X.Y. Liu and W.B. Li, Modeling of Strain Hardening and Dynamic Recrystallization of ZK60 Magnesium Alloy During Hot Deformation, Trans. Nonferrous Met. Soc. China, 2012, 22(2), p 246–254. https://doi.org/10.1016/S1003-6326(11)61167-9CrossRef

26.

R.H. Demirkol, Analysis Of Effects Of Temperature Variation On Deep Drawing Process Using Different Constitutive Laws. Master’s degree thesis, Natural And Applied Sciences of Middle East Technical University, 2019

27.

N. Sen, and T. Civek, Detailed Deformation Behaviour Analysis of DP Steels at Warm Forming Temperatures via Warm Tensile Tests Detailed Deformation Behaviour Analysis of DP Steels at Warm Forming Temperatures via Warm Tensile Tests, Ironmak. Steelmak., 2022 https://doi.org/10.1080/03019233.2022.2036083CrossRef

28.

R. Dashwood, Formability Analysis of Pre-Strained AA5754-O Sheet Metal using Yld96 Plasticity Theory: Role of Amount and Direction of Uni-axial, J. Manuf. Process., 2016, 24, p 270–282. https://doi.org/10.1016/j.jmapro.2016.09.014CrossRef

29.

N. Sen, and T. Civek, Detailed Deformation Behaviour Analysis of DP Steels at Warm Forming Temperatures via Warm Tensile Tests, Ironmak. Steelmak., 2022 https://doi.org/10.1080/03019233.2022.2036083CrossRef

30.

G. Palumbo, and L. Tricarico, Numerical and experimental investigations on the Warm Deep Drawing process of circular aluminum alloy specimens, J. Mater. Process. Technol., 2007, 184(1–3), p 115–123. https://doi.org/10.1016/j.jmatprotec.2006.11.024CrossRef

31.

T. Altan, and A.E. Tekkaya, Sheet Metal Forming Fundamentals, ASM International, Materials Park, Ohio, 2012.CrossRef

32.

E. Doege, T. Hallfeld, Y. Khalfalla and K.Y. Benyounis, Metal Working: Stretching of Sheets, Ref. Modul. Mater. Sci. Mater. Eng., 2016 https://doi.org/10.1016/b978-0-12-803581-8.03361-0CrossRef

33.

G.E. Dieter, Mechanical Metallurgy, Mech. Metall., 2011 https://doi.org/10.5962/bhl.title.35895CrossRef

34.

Z.H. Lu, and D. Lee, Prediction of History-Dependent Forming Limits by Applying Different Hardening Models, Int. J. Mech. Sci., 1987, 29(2), p 123–137. https://doi.org/10.1016/0020-7403(87)90047-6CrossRef

35.

M.Y. Li, X. Zhu and E. Chu, Effect of Strain Rate Sensitivity on FLDs-An Instability Approach, Int. J. Mech. Sci., 2012, 64(1), p 273–279. https://doi.org/10.1016/j.ijmecsci.2012.05.013CrossRef

36.

S.S. Panicker, H.G. Singh, S.K. Panda and R. Dashwood, Characterization of Tensile Properties, Limiting Strains, and Deep Drawing Behavior of AA5754-H22 Sheet at Elevated Temperature, J. Mater. Eng. Perform., 2015, 24(11), p 4267–4282. https://doi.org/10.1007/s11665-015-1740-6CrossRef

37.

M.H. Cetin, A. Ugur, O. Yigit, H. Gokkaya and E. Arcaklioglu, Development of Forming Temperature Curves for Warm Deep Drawing Process Under Non-isothermal Conditions, Arab. J. Sci. Eng., 2015, 40(9), p 2763–2784. https://doi.org/10.1007/s13369-015-1756-0CrossRef

Title: Prediction of Flow Behavior and Deformation Analysis of AA5754 Sheet Metal at Warm and Hot Temperatures
Authors: Nuri Şen
Tolgahan Civek
Ömer İlhan
Özgür Erdem Yurt
M. Hüseyin Çetin
Hamza Şimşir
Publication date: 05-05-2023
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 7/2024
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-023-08235-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7/2024

Special Diagram for Hydrogen Effect Evaluation on Mechanical Characterizations of Pipeline Steel

Investigation of TiO2/SiC Coating on Graphite Electrodes for Electrical Arc Furnaces

Tension–Compression Flow Asymmetry as a Function of Alloy Composition in the Al-Si System

Evaluation of Wire Electrical Discharge Machining Performance Features on EN AW-6082 T6 Aluminum Alloy and Optimization of Machining Characteristics

Welding Dissimilar Alloys of CoCrFeMnNi High-Entropy Alloy and 304 Stainless Steel Using Gas Tungsten Arc Welding

Pure Copper Sheets Processed by Constrained Studded Pressing: The Effect of Die Angle

Premium Partners