Top

Polymer Science, Series D

Published in:

01-10-2021

Prospects for the Use of Impregnation Compounds for Maintenance of Suspension Elements of Road Vehicles under Different Temperature Conditions

Authors: I. G. Marenkov, N. I. Baurova

Published in: Polymer Science, Series D | Issue 4/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The possibility of using impregnating compounds for maintenance of rubber elements of pneumatic suspension of road vehicles in different temperature conditions has been evaluated. Solidol, which is the cheapest general-purpose plastic grease, and the anaerobic material AN-1U (a more expensive grease) have been used as impregnating compounds. It is shown that the use of anaerobic compound when servicing rubber elements of the pneumatic suspension of road vehicles allows increasing their resistance to negative temperatures, minimizing material cracking and, consequently, increasing suspension durability.

previous article Optimization of Properties of Epoxy Binders during Their Modification

next article On the Results of Application of Correlation Analysis during the Investigation of the Structure and Properties of Butadiene–Styrene Thermoplastic Elastomers

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

V. A. Zorin and V. S. Bocharov, Reliability of Machines: Handbook (Orel State Univ., Orel, 2003) [in Russian].

I. G. Marenkov and N. I. Baurova, “The use of impregnating compounds when servicing suspension elements of road machines made of non-metallic materials,” Vse Mater., Entsikl. Sprav., No. 8, 18–22 (2020).

E. A. Kosenko, “Methods of non-destructive testing of mechanical engineering products made of polymer composite materials (review),” Remont, Vosstanov., Modernizatsiya, No. 1, 12–17 (2020).

V. A. Zorin, N. I. Baurova, and A. M. Shakurova, “Investigation of the structure of an encapsulated anaerobic adhesive,” Polym. Sci., Ser. D 7 (4), 303–305 (2014).

A. P. Petrova and G. V. Malysheva, Adhesives, Adhesive Binders, and Adhesive Prepregs: Handbook, Ed. by E. N. Kablov (All-Russian Scientific Research Institute of Aviation Materials, Moscow, 2017) [in Russian].

V. A. Nelyub and G. V. Malysheva, “Modern treatment technologies of carbon fibre for ensuring the high strength carbon fibre reinforced plastic production,” MATEC Web Conf. 129, 02001 (2017).

V. A. Nelyub, “A study of the microstructure of dress glass fibers,” Polym. Sci., Ser. D 9 (1), 96–100 (2016).

M. A. Gorodetskii, V. A. Nelyub, G. V. Malysheva, A. Y. Shaulov, and A. A. Berlin, “Technology of forming and the properties of reinforced composites based on an inorganic binder,” Russ. Metall. 2018, 1195–1198 (2018).CrossRef

P. P. Maung, G. V. Malysheva, and S. A. Gusev, “A study of the effect of network angle of fabrics on kinetics of impregnation upon molding of articles made from carbon plastics,” Polym. Sci., Ser. D 9 (4), 407–410 (2016).

10.

V. A. Nelyub, “Technologies of production of components electric transmission line supports from epoxy binders by the winding method,” Polym. Sci., Ser. D 6 (1), 44–47 (2013).

11.

V. A. Nelyub, A. S. Borodulin, L. P. Kobets, and G. V. Malysheva, “Viscous hysteresis in filled siloxane binders,” Polym. Sci., Ser. D 10 (1), 19–22 (2017).

12.

V. A. Nelyub, A. S. Borodulin, L. P. Kobets, and G. V. Malysheva, “Thixotropy hysteresis and structure formation in elastomeric suspensions,” Inorg. Mater.: Appl. Res. 9 (4), 603–608 (2018).CrossRef

13.

V. F. Kablov, Yu. A. Galitskii, and V. N. Tyshkevich, Physics and Mechanics of Reinforced Plastics and Rubber-Cord Composites: Monograph (Volzhsky Polytechnic Inst., Volgograd, 2020) [in Russian].

14.

V. F. Kablov, Problems of Modern Polymer Technology: Monograph (Volzhsky Polytechnic Inst., Volgograd, 2019) [in Russian].

15.

A. I. Rudskoi, A. A. Popovich, and A. V. Grigor’ev, Composite Materials and Coatings: Handbook (St. Petersburg, 2017) [in Russian].

16.

V. A. Nelyub and A. Yu. Konoplin, “Materials and technologies effective in the Arctic during repair work,” Klei, Germetiki, Tekhnol., No. 6, 25–28 (2018).

17.

A. I. Rudskoi and N. I. Baurova, “Technological heredity during the production and operation of structural materials,” Russ. Metall. 13, 1378–1383 (2019).CrossRef

18.

N. I. Baurova, “Deflected mode simulation of adhesive joints,” Polym. Sci., Ser. D 2 (1), 54–57 (2009).

19.

I. I. Kozlova and V. P. Lukonin, “To the 70th anniversary of the Academician V. A. Kargin Research Institute of Polymers,” Klei, Germetiki, Tekhnol., No. 7, 2–4 (2019).

Title: Prospects for the Use of Impregnation Compounds for Maintenance of Suspension Elements of Road Vehicles under Different Temperature Conditions
Authors: I. G. Marenkov
N. I. Baurova
Publication date: 01-10-2021
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 4/2021
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421221040158

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2021

Technological Support of Gluing Quality when Repairing Products

Investigation of the Rheokinetics of Curing and Properties of an Epoxyurethane Thermal-Protective Coating

Assessment of the Resistance of the Paint and Varnish Coatings on Parts Made of Polymer Composite Materials to the Action of Ultraviolet Radiation

Oxobiodegradable Polymer Materials (Review)

On the Results of Application of Correlation Analysis during the Investigation of the Structure and Properties of Butadiene–Styrene Thermoplastic Elastomers

Application of Polybutadiene–Poly(Tetramethylene Oxide) Block Copolymers to Modify Adhesive Compositions

Premium Partners