Top

Polymer Science, Series D

Published in:

01-10-2021

Application of Polybutadiene–Poly(Tetramethylene Oxide) Block Copolymers to Modify Adhesive Compositions

Authors: I. P. Storozhuk, N. G. Pavlyukovich, A. L. Kotyukova, A. V. Polezhaev

Published in: Polymer Science, Series D | Issue 4/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

With the aim of obtaining diphilic elastomers that may hold promise as modifiers of impact viscosity and adhesion of thermosetting adhesives, polyblock polybutadiene–poly(tetramethylene oxide) block copolymers are synthesized. The synthesized block copolymers are shown to possess properties of reinforced elastomers with very high relative elongation at break (up to 6000%); thanks to their diphilic nature and the presence of urethane groups, they the improve operational properties of adhesive–melts meant for gluing rubber–fabric materials.

previous article A Study of Elastomeric Fire- and Heat-Resistant Materials Containing Functionally Active Structures

next article A Study of the Properties of Melamine–Carbamide–Formaldehyde Resins Modified with Lignosulphonates

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

M. F. Sonnenschein, Polyurethanes: Science, Technology, Markets, and Trends (Wiley, Chichester, 2014; Professiya, St. Petersburg, 2018).

R.-D. Langenhagen, H. Schator, and C. Weitemeyer, US Patent No. 5130344A (1992).

O. A. Lyubartovich, Yu. L. Morozov, and O. B. Tret’yakov, Reaction Molding of Polyurethanes (Khimiya, Moscow, 1990) [in Russian].

A. Noshay and J. E. McGrath, Block Copolymers (Academic, New York, 1977; Mir, Moscow, 1980).

L.H. Sperling, Interpenetrating Polymer Networks and Related Materials (Springer-Verlag, New York, 2012).

E. T. Denisov, Oxidation and Destruction of Carbon Chain Polymers (Khimiya, Leningrad, 1990).

K. B. Piotrovskii and Z. N. Tarasova, Aging and Stabilization of Synthetic Rubbers and Vulcanizates (Khimiya, Moscow, 1980) [in Russian].

A. P. Petrova and G. V. Malysheva, Adhesives, Adhesive Binders, and Adhesive Prepregs: Handbook, Ed. by E. N. Kablova (All-Russian Scientific-Research Institute of Aviation Materials, Moscow, 2017) [in Russian].

N. I. Baurova, “Deflected mode simulation of adhesive joints,” Polym. Sci., Ser. D 2 (1), 54–57 (2009).

10.

A. Y. Sergeev, R. A. Turusov, N. I. Baurova, and A. M. Kuperman, “Stresses arising during cure of the composite wound on the cylindrical surface of an element of exhaust system,” Mech. Compos. Mater. 51 (3), 321–332 (2015).CrossRef

11.

V. A. Nelyub, A. S. Borodulin, L. P. Kobets, and G. V. Malysheva, “Thixotropy hysteresis and structure formation in elastomeric suspensions,” Inorg. Mater.: Appl. Res. 9 (4), 603–608 (2018).CrossRef

12.

Yu. A. Sokolova and E. M. Gotlib, Modified Epoxy Adhesives and Coatings in Construction (Stroiizdat, Moscow, 1990) [in Russian].

13.

Polymer Composite Materials. Properties. Structure. Technologies, Ed. by A. A. Berlin (Professiya, St. Petersburg, 2009) [in Russian].

14.

S. L. Bazhenov, A. A. Berlin, A. A. Kul’kov, and V. G. Oshmyan, Polymer Composite Materials. Strength and Technology (Intellekt, Moscow, 2009) [in Russian].

15.

Yu. A. Mikhailin, Structural Polymer Composite Materials (Nauchn. Osn. Tekhnol., Moscow, 2008).

16.

L. V. Chursova, N. N. Panina, T. A. Grebeneva, and I. Yu. Kutergina, Epoxy Resins, Hardeners, Modifiers, and Binders on Their Basis (Professiya, St. Petersburg, 2020) [in Russian].

17.

U. Poth, Polyester und Alkydharze: Grundlagen und Anwendungen (Vincentz, Network, Hannover, 2014).

Title: Application of Polybutadiene–Poly(Tetramethylene Oxide) Block Copolymers to Modify Adhesive Compositions
Authors: I. P. Storozhuk
N. G. Pavlyukovich
A. L. Kotyukova
A. V. Polezhaev
Publication date: 01-10-2021
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 4/2021
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421221040237

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2021

Rubber and Rubber–Polymer Modifiers of Asphalt Concrete Mixes Prepared by High-Temperature Shear Grinding. Part 2. Methodology of Evaluation of Performance of Modifiers

A Study of Elastomeric Fire- and Heat-Resistant Materials Containing Functionally Active Structures

Phenol–Formaldehyde Oligomers Modified with Carbon Nanoparticles and Their Use in Adhesives and Prepregs

Prospects for the Use of Impregnation Compounds for Maintenance of Suspension Elements of Road Vehicles under Different Temperature Conditions

A Method for Calculating the Parameters of a Unit for Thermoradiation Treatment of Polymer Coatings in the Restoration of Car Body Parts

Adhesion Interaction and Adhesion Mechanics. Theory and Its Application

Premium Partners