Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Polymer Bulletin
Published in: Polymer Bulletin 5/2019

23-08-2018 | Review

Recent developments in bamboo fiber-based composites: a review

Authors: Adamu Muhammad, Md.Rezaur Rahman, Sinin Hamdan, Khairuddin Sanaullah

Published in: Polymer Bulletin | Issue 5/2019

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The dominant emerging materials from more than 30 years ago are plastics, ceramics, and composite materials. Composite materials have steady growth in the volume and number of its applications as it enviably penetrates existing markets while creating new ones. Contemporary composite materials are well established in today’s market of specialty and everyday products with its proven worth as weight-saving materials. There is a current challenge of cost-effectiveness and environmental friendliness, thus leading to the search for low-cost polymeric-reinforced composites using entirely biodegradable fibers. Bamboo fibers have provided some response in the production of materials that are recyclable, biodegradable, and sustainable. The natural fibers yield composites with high strength-to-weight ratios as a function of the best properties of each component. Researchers have found sustainable high-end quality industrial products that can be generated from raw materials like bamboo fibers. Due to its high strength-weight ratio, bamboo fibers are often used to replace natural glass fiber. Thus, the much attention has been given to its composites with different matrix materials. This article gives a review of recent developments of bamboo fiber-based reinforced composites, its processing methodology, and applications.
previous article Elaboration of hydroxyapatite nanoparticles and chitosan/hydroxyapatite composites: a present status
next article Comparative studies of chemical crosslinking reactions and applications of bio-based hydrogels

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
van Dam JEG, Elbersen HW, Daza Montaño CM (2018) Bamboo production for industrial utilization. In: Perennial grasses for bioenergy and bioproducts. Elsevier, pp 175–216
2.
Thakur VK, Thakur MK, Gupta RK (2014) Review: raw natural fiber-based polymer composites. Int J Polym Anal Charact 19(3):256–271CrossRef
3.
Chattopadhyay DP, Inamdar MS (2015) Studies on the synthesis and application of N, N, N-trimethyl chitosan chloride (TMCHT) on cotton fabric. J Nat Fibers 12(4):341–356CrossRef
4.
Zakikhani P, Zahari R, Sultan MTH, Majid DL (2014) Extraction and preparation of bamboo fibre-reinforced composites. Mater Des 63:820–828CrossRef
5.
Constable G, Llewellyn D, Walford SA, Clement JD (2015) Cotton breeding for fiber quality improvement. In: Industrial crops: breeding for bioenergy and bioproducts, pp 191–232
6.
Nasir M et al (2017) Natural fiber improvement by laccase; optimization, characterization and application in medium density fiberboard. J Nat Fibers 14(3):379–389CrossRef
7.
Saw SK, Akhtar K, Yadav N, Singh AK (2014) Hybrid composites made from jute/coir fibers: water absorption, thickness swelling, density, morphology, and mechanical properties. J Nat Fibers 11(1):39–53CrossRef
8.
Gupta MK, Srivastava RK (2016) Mechanical, thermal and water absorption properties of hybrid sisal/jute fiber reinforced polymer composite. Indian J Eng Mater Sci 23:231–238
9.
Gupta MK, Srivastava RK (2016) Mechanical, thermal and water absorption properties of hybrid sisal/jute fiber reinforced polymer composite. Indian J Eng Mater Sci 23(4):231–238
10.
Ranilla LG, Kwon YI, Apostolidis E, Shetty K (2010) Phenolic compounds, antioxidant activity and in vitro inhibitory potential against key enzymes relevant for hyperglycemia and hypertension of commonly used medicinal plants, herbs and spices in Latin America. Bioresour Technol 101(12):4676–4689CrossRefPubMed
11.
Yang X, Kim H, Yang L, Cheng C, Zhao Y (2014) Composite varistors based on epoxy resin/La0.8Sr0.2MnO3. J Compos Mater 48(6):677–681CrossRef
12.
Matadi Boumbimba R et al (2014) Preparation and mechanical characterisation of laminate composites made of glass fibre/epoxy resin filled with tri bloc copolymers. Compos Struct 116(1):414–422CrossRef
13.
Campilho RDS (2016) Introduction to natural fiber composites. Nat Fiber Compos 5:356
14.
Wang G, Chen F (2016) Development of bamboo fiber-based composites. In: Advanced high strength natural fibre composites in construction, pp 235–255
15.
Roslan SAH, Rasid ZA, Hassan MZ (2015) The natural fiber composites based on bamboo fibers: a review. ARPN J Eng Appl Sci 10(15):6279–6288
16.
Peng Z et al (2013) The draft genome of the fast-growing non-timber forest species moso bamboo (Phyllostachys heterocycla). Nat Genet 45(4):456–461CrossRefPubMed
17.
Rajan KP, Veena NR, Maria HJ, Rajan R, Skrifvars M, Joseph K (2011) Extraction of bamboo microfibrils and development of biocomposites based on polyhydroxybutyrate and bamboo microfibrils. J Compos Mater 45(12):1325–1329CrossRef
18.
Abdul Khalil HPS et al (2014) The use of bamboo fibres as reinforcements in composites. In: Biofiber reinforcements in composite materials, pp 488–524
19.
Bystriakova N, Kapos V, Stapleton C, Lysenko I (2003) Bamboo biodiversity. Unep-Wcmc/Inbar 1:1–72
20.
Sharma B, Gatóo A, Bock M, Ramage M (2015) Engineered bamboo for structural applications. Constr Build Mater 81:66–73CrossRef
21.
Akinlabi ET, Anane-Fenin K, Akwada DR (2017) Bamboo taxonomy and distribution across the globe. In: Bamboo, pp 1–37
22.
Okubo K, Fujii T, Thostenson ET (2009) Multi-scale hybrid biocomposite: processing and mechanical characterization of bamboo fiber reinforced PLA with microfibrillated cellulose. Compos Part A Appl Sci Manuf 40(4):469–475CrossRef
23.
Palombini FL, Kindlein W, de Oliveira BF, de Araujo Mariath JE (2016) Bionics and design: 3D microstructural characterization and numerical analysis of bamboo based on X-ray microtomography. Mater Charact 120:357–368CrossRef
24.
Latif SS, Nahar S, Hasan M (2015) Fabrication and electrical characterization of bamboo fiber-reinforced polypropylene composite. J Reinf Plast Compos 34(3):187–195CrossRef
25.
Mounika M, Ramaniah K, Ratna Prasad AV, Rao KM, Hema Chandra Reddy K (2012) Thermal conductivity characterization of bamboo fiber reinforced polyester composite. J Mater Environ Sci 3(6):1109–1116
26.
Takagi H, Fujii T (2013) Mechanical characterization of bamboo fiber-reinforced green composites. Key Eng Mater 577–578:81–84CrossRef
27.
Singh TJ, Samanta S (2014) Characterization of natural fiber reinforced composites-bamboo and sisal: a review. IJRET Int J Res Eng Technol 03(07):187–195
28.
Thakur VK, Kessler MR (eds) (2015) Green biorenewable biocomposites: from knowledge to industrial applications. CRC Press, Boca Raton, USA, p 323
29.
Liu D, Song J, Anderson DP, Chang PR, Hua Y (2012) Bamboo fiber and its reinforced composites: structure and properties. Cellulose 19(5):1449–1480CrossRef
30.
Eberts W, Siniawski MT, Burdiak T, Polito N (2015) Mechanical characterization of bamboo and glass fiber biocomposite laminates. J Renew Mater 3(4):259–267CrossRef
31.
Sanal I (2016) Bamboo fiber-reinforced composites
32.
Clark LG, Londono X, Ruiz-Sanchez E (2015) Bamboo taxonomy and habitat. In: Bamboo: the plant and its uses, pp 1–30
33.
Gohil PP, Patel K, Chaudhary V, Ramjiyani R (2016) Effect of bamboo hybridization and staking sequence on mechanical behavior of bamboo-glass hybrid composite
34.
Li Q, WenJi Y, YangLun Y (2012) Research on properties of reconstituted bamboo lumber made by thermo-treated bamboo bundle curtains. For Prod J 62(7/8):545–550
35.
Rao KMM, Rao KM (2007) Extraction and tensile properties of natural fibers: vakka, date and bamboo. Compos Struct 77(3):288–295CrossRef
36.
Akinlabi ET, Anane-Fenin K, Akwada DR (2017) Properties of bamboo. In: Bamboo, pp 87–147
37.
Hojo T, Zhilan XU, Yang Y, Hamada H (2014) Tensile properties of bamboo, jute and kenaf mat-reinforced composite. Energy Procedia 56(C):72–79CrossRef
38.
W. J., R. D, Canavan S (2015) Understanding the risks of an emerging global market for cultivating bamboo: considerations for a more responsible dissemination of alien bamboos. In: 10th World bamboo congress
39.
Liu X et al (2016) Nomenclature for engineered bamboo. BioResources 11(1):1141–1161
40.
Okubo K, Fujii T (2013) Improvement of interfacial adhesion in bamboo polymer composite enhanced with microfibrillated cellulose. In: Polymer composites, biocomposites, vol 3, pp 317–329
41.
International Network for Bamboo & Rattan (2014) Bamboo: a strategic resource for countries to reduce the effects of climate change. Policy Synth Rep, pp 1–28
42.
Suhaily SS, Khalil HPSA, Nadirah WOW, Jawaid M (2013) Bamboo based biocomposites material, design and applications. Mater Sci, p 549
43.
Bystriakova N, Kapos V, Lysenko I, Stapleton CMA (2003) Distribution and conservation status of forest bamboo biodiversity in the Asia-Pacific Region. Biodivers Conserv 12(9):1833–1841CrossRef
44.
Pulavarty B, Sarangi A (2015) Salt tolerance screening of bamboo genotypes (bamboo sps.) using growth and organic osmolytes accumulation as effective indicators. In: World Bamboo Congr., vol 10, no 1, pp 1–16
45.
Gupta A, Kumar A (2008) Potential of bamboo in sustainable development. Asia Pacific Bus Rev IV(4):100–107CrossRef
46.
Correal JF (2016) Bamboo design and construction. In: Nonconventional and vernacular construction materials, pp 393–431
47.
Kim H, Okubo K, Fujii T, Takemura K (2013) Influence of fiber extraction and surface modification on mechanical properties of green composites with bamboo fiber. J Adhes Sci Technol 27(12):1348–1358CrossRef
48.
Kavitha S, Felix Kala T (2016) Study on structure and extraction of bamboo fiber. Asian J Sci Technol 7(2):2426–2428
49.
Yueping W et al (2010) Structures of bamboo fiber for textiles. Text Res J 80(4):334–343CrossRef
50.
Bar-Yosef O, Eren MI, Yuan J, Cohen DJ, Li Y (2012) Were bamboo tools made in prehistoric Southeast Asia? An experimental view from South China. Quat Int 269:9–21CrossRef
51.
Amada S, Ichikawa Y, Munekata T, Nagase Y, Shimizu H (1997) Fiber texture and mechanical graded structure of bamboo. Compos Part B Eng 28(1–2):13–20CrossRef
52.
Walter L (2002) The anatomy of bamboo culms. Int Netw Bamboo Ratt, p 128
53.
Liese W (1992) The structure of bamboo. In: International symposium on industrial use of bamboo, pp 1–6
54.
Yu WK, Chung KF, Chan SL (2005) Axial buckling of bamboo columns in bamboo scaffolds. Eng Struct 27(1):61–73CrossRef
55.
Xiao Y (2016) Engineered bamboo. In: Nonconventional and vernacular construction materials, pp 433–452
56.
Bai YY, Xiao LP, Shi ZJ, Sun RC (2013) Structural variation of bamboo lignin before and after ethanol organosolv pretreatment. Int J Mol Sci 14(11):21394–21413CrossRefPubMedPubMedCentral
57.
Resistance C, Properties T, Bamboo OF, Fibers G, Epoxy R, Composites H (2011) Chemical resistace and tensile properties of bamboo and glass fibers reinforced epoxy hybrid composties. Int J Mater Biomater Appl 1(1):17–20
58.
Abdul Khalil HPS, Bhat IUH, Jawaid M, Zaidon A, Hermawan D, Hadi YS (2012) Bamboo fibre reinforced biocomposites: a review. Mater Des 42:353–368CrossRef
59.
Li D-L et al (2015) Effect of lignin on bamboo biomass self-bonding during hot-pressing: lignin structure and characterization. BioResources 10(4):6769–6782
60.
Xie J, Hse CY, Shupe TF, Pan H, Hu T (2016) Extraction and characterization of holocellulose fibers by microwave-assisted selective liquefaction of bamboo. J Appl Polym Sci 133(18)
61.
Zhang Z, Xue Q, Huang K, Ma Q, Guo Y (2013) Study on dissociation of nano bamboo extractives. Extraction 4(97):7
62.
Hunter IR (2003) Bamboo resources, uses and trade: the future? J Bamboo Rattan 2(4):319–326CrossRef
63.
Biswas S, Ahsan Q, Cenna A, Hasan M, Hassan A (2013) Physical and mechanical properties of jute, bamboo and coir natural fiber. Fibers Polym 14(10):1762–1767CrossRef
64.
Nayak L, Mishra SP (2016) Prospect of bamboo as a renewable textile fiber, historical overview, labeling, controversies and regulation. Fashion Textiles 3(1)
65.
Osorio L, Trujillo E, Van Vuure AW, Verpoest I (2011) Morphological aspects and mechanical properties of single bamboo fibers and flexural characterization of bamboo/epoxy composites. J Reinf Plast Compos 30(5):396–408CrossRef
66.
Sugesty S, Kardiansyah T, Hardiani H (2015) Bamboo as raw materials for dissolving pulp with environmental friendly technology for rayon fiber. Procedia Chem 17:194–199CrossRef
67.
Pinho E, Henriques M, Oliveira R, Dias A, Soares G (2010) Development of biofunctional textiles by the application of resveratrol to cotton, bamboo, and silk. Fibers Polym 11(2):271–276CrossRef
68.
Stelte W (2013) Steam explosion for biomass pre-treatment
69.
Yao J, Bastiaansen C, Peijs T (2014) High strength and high modulus electrospun nanofibers. Fibers 2(2):158–186CrossRef
70.
Zou L, Jin H, Lu W-Y, Li X (2009) Nanoscale structural and mechanical characterization of the cell wall of bamboo fibers. Mater Sci Eng C 29(4):1375–1379CrossRef
71.
Jayaramudu J, Reddy GSM, Varaprasad K, Sadiku ER, Ray SS, Rajulu AV (2014) Mechanical properties of uniaxial natural fabric Grewia tilifolia reinforced epoxy based composites: effects of chemical treatment. Fibers Polym 15(7):1462–1468CrossRef
72.
Kang JT, Kim SH (2011) Improvement in the mechanical properties of polylactide and bamboo fiber biocomposites by fiber surface modification. Macromol Res 19(8):789–796CrossRef
73.
Zhou A, Huang D, Li H, Su Y (2012) Hybrid approach to determine the mechanical parameters of fibers and matrixes of bamboo. Constr Build Mater 35:191–196CrossRef
74.
Kuromi Y et al (2012) Removal of bamboo fragments transorbitally penetrated into the cerebellum and temporal lobe 30 years after the injury. Neurol Surg 40(11):979–983
75.
Yu H, Yu C (2007) Study on microbe retting of kenaf fiber. Enzyme Microb Technol 40(7):1806–1809CrossRef
76.
Lin JS, Wang X, Lu G (2014) Crushing characteristics of fiber reinforced conical tubes with foam-filler. Compos Struct 116(1):18–28CrossRef
77.
Yu Y, Huang X, Yu W (2014) A novel process to improve yield and mechanical performance of bamboo fiber reinforced composite via mechanical treatments. Compos Part B Eng 56:48–53CrossRef
78.
da Correia VC, dos Santos V, Sain M, Santos SF, Leão AL, Savastano Junior H (2016) Grinding process for the production of nanofibrillated cellulose based on unbleached and bleached bamboo organosolv pulp. Cellulose 23(5):2971–2987CrossRef
79.
Hamdi H, Zahouani H, Bergheau JM (2004) Residual stresses computation in a grinding process. J Mater Process Technol 147(3):277–285CrossRef
80.
Erdumlu N, Ozipek B (2008) Investigation of regenerated bamboo fibre and yarn characteristics. Fibres Text East Eur 16(4):43–47
81.
Eriksson M, Goossens H, Peijs T (2015) Influence of drying procedure on glass transition temperature of PMMA based nanocomposites. Nanocomposites 1(1):36–45CrossRef
82.
Zakikhani P, Zahari R, Sultan MTH, Majid DL (2014) Bamboo fibre extraction and its reinforced polymer composite material. Int J Chem Biomol Metall Mater Sci Eng 8(4):271–274
83.
Li MF, Sun SN, Xu F, Sun RC (2012) Microwave-assisted organic acid extraction of lignin from bamboo: structure and antioxidant activity investigation. Food Chem 134(3):1392–1398CrossRefPubMed
84.
Fu J, Yang X, Yu C (2008) Preliminary research on bamboo degumming with xylanase. Biocatal Biotransform 26(5):450–454CrossRef
85.
Manalo AC, Wani E, Zukarnain NA, Karunasena W, Lau KT (2015) Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre-polyester composites. Compos Part B Eng 80:73–83CrossRef
86.
Xie J, Lin YS, Shi XJ, Zhu XY, Su WK, Wang P (2013) Mechanochemical-assisted extraction of flavonoids from bamboo (Phyllostachys edulis) leaves. Ind Crops Prod 43(1):276–282CrossRef
87.
88.
Jonoobi M et al (2015) Different preparation methods and properties of nanostructured cellulose from various natural resources and residues: a review. Cellulose 22(2):935–969CrossRef
89.
Liu DG, Song JW, Anderson DP, Chang PR, Hua Y (2012) Bamboo fiber and its reinforced composites: structure and properties. Cellulose 19(5):1449–1480CrossRef
90.
Amada S, Untao S (2001) Fracture properties of bamboo. Compos Part B Eng 32(5):451–459CrossRef
91.
Castanet E et al (2016) Structure–property relationships of elementary bamboo fibers. Cellulose 23(6):3521–3534CrossRef
92.
Okubo K, Fujii T, Yamamoto Y (2004) Development of bamboo-based polymer composites and their mechanical properties. Compos A Appl Sci Manuf 35(3):377–383CrossRef
93.
Phong NT, Fujii T, Chuong B, Okubo K (2011) Study on how to effectively extract bamboo fibers from raw bamboo and wastewater treatment. J Mater Sci Res 1(1)
94.
Rohit K, Dixit S (2016) A review—future aspect of natural fiber reinforced composite. Polym Renew Resour 7(2):43–60
95.
Al-mansob RA et al (2017) Chemical treatments of natural fiber for use in natural fiber-reinforced composites: a review. J Polym Environ 87(1):42
96.
Hajiha H, Sain M, Mei LH (2014) Modification and characterization of hemp and sisal fibers. J Nat Fibers 11(2):144–168CrossRef
97.
Chand N, Fahim M (2008) Tribology of natural fiber polymer composites
98.
Tonoli GHD, Mendes RF, Siqueira G, Bras J, Belgacem MN, Savastano H (2013) Isocyanate-treated cellulose pulp and its effect on the alkali resistance and performance of fiber cement composites. Holzforschung 67(8):853–861CrossRef
99.
Kaushik VK, Kumar A, Kalia S (2013) Effect of mercerization and benzoyl peroxide treatment on morphology, thermal stability and crystallinity of sisal fibers. Int J Text Sci 1(6):101–105CrossRef
100.
George M, Mussone PG, Alemaskin K, Chae M, Wolodko J, Bressler DC (2016) Enzymatically treated natural fibres as reinforcing agents for biocomposite material: mechanical, thermal, and moisture absorption characterization. J Mater Sci 51(5):2677–2686CrossRef
101.
George M, Mussone PG, Bressler DC (2014) Surface and thermal characterization of natural fibres treated with enzymes. Ind Crops Prod 53:365–373CrossRef
102.
Faruk O, Bledzki AK, Fink HP, Sain M (2012) Biocomposites reinforced with natural fibers: 2000–2010. Prog Polym Sci 37(11):1552–1596CrossRef
103.
Cromer BM, Coughlin EB, Lesser AJ (2015) Evaluation of a new processing method for improved nanocomposite dispersions. Nanocomposites 1(3):152–159CrossRef
104.
Ghazy A, Bassuoni M, Maguire E, O’Loan M (2016) Properties of fiber-reinforced mortars incorporating nano-silica. Fibers 4(1):6CrossRef
105.
Khan Z, Yousif BF, Islam M (2017) Fracture behaviour of bamboo fiber reinforced epoxy composites. Compos Part B Eng 116:186–199CrossRef
106.
Wang YN, Weng YX, Wang L (2014) Characterization of interfacial compatibility of polylactic acid and bamboo flour (PLA/BF) in biocomposites. Polym Test 36:119–125CrossRef
107.
Sharma B (2016) Development of engineered bamboo for structural design. In: Symposium: bamboo in the urban environment 2016
108.
Shibata S, Cao Y, Fukumoto I (2008) Flexural modulus of the unidirectional and random composites made from biodegradable resin and bamboo and kenaf fibres. Compos Part A Appl Sci Manuf 39(4):640–646CrossRef
109.
May-Pat A, Valadez-González A, Herrera-Franco PJ (2013) Effect of fiber surface treatments on the essential work of fracture of HDPE-continuous henequen fiber-reinforced composites. Polym Test 32(6):1114–1122CrossRef
110.
De Almeida AC et al (2017) Wood-bamboo particleboard: mechanical properties. BioResources 12(4):7784–7792
111.
Trujillo D, López LF (2016) Bamboo material characterisation. In: Nonconventional and vernacular construction materials, pp 365–392
112.
Sharma B, Bauer H, Schickhofer G, Ramage M (2017) Mechanical characterisation of structural laminated bamboo. Proc Inst Civ Eng Struct Build 170(SB4):250–264CrossRef
113.
Jain S, Kumar R, Jindal UC (1992) Mechanical behaviour of bamboo and bamboo composite. J Mater Sci 27(17):4598–4604CrossRef
114.
Wang F, Shao J, Keer LM, Li L, Zhang J (2015) The effect of elementary fibre variability on bamboo fibre strength. Mater Des 75:136–142CrossRef
115.
Gulrajani ML, Arora A (2006) Isolation and characterization of bamboo fibres. J Bamboo Ratt 5(3–4):177–186
116.
Daniel IM, Ishai O (1994) Engineering mechanics of composite materials. Mech Compos Mater 881–886
117.
Vigneshwar M, Divagar S, Harisudhan PS, Mariselvam V, Selvamani ST (2015) Flexural test on glass, sisal, kenaf fiber composite material produced by hand layup method. Int J Appl Eng Res 10(84): Special Issue, pp. 140–142
118.
Palanikumar K, Ramesh M, Hemachandra Reddy K (2016) Experimental investigation on the mechanical properties of green hybrid sisal and glass fiber reinforced polymer composites. J Nat Fibers 13(3):321–331CrossRef
119.
Fiore V, Di Bella G, Valenza A (2015) The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy composites. Compos Part B Eng 68:14–21CrossRef
120.
Liang K, Shi S, Wang G (2014) Effect of impregnated inorganic nanoparticles on the properties of the kenaf bast fibers. Fibers 2(3):242–254CrossRef
121.
Bajpai PK, Singh I, Madaan J (2012) Development and characterization of PLA-based green composites: a review. J Thermoplast Compos Mater 27(1):52–81CrossRef
122.
Bajpai PK, Singh I, Madaan J (2014) Development and characterization of PLA-based green composites: a review. J Thermoplast Compos Mater 27(1):52–81CrossRef
123.
Pracella M, Haque MM, Puglia D, Alvarez V (2012) Preparation and characterization of PLA nanocomposites with nanocellulose filled PVAC. In: 15th European conference on composite materials
124.
Montaño CMD, Pels JR, Fryda LE (2012) Evaluation of torrefied bamboo for sustainable bioenergy production evaluation of torrefied bamboo for sustainable bioenergy. In: 9th World Bamboo Congress, April, pp 10–15
125.
Peng P, She D (2014) Isolation, structural characterization, and potential applications of hemicelluloses from bamboo: a review. Carbohyd Polym 112:701–720CrossRef
126.
Abilash N, Sivapragash M (2016) Optimizing the delamination failure in bamboo fiber reinforced polyester composite. J King Saud Univ Eng Sci 28(1):92–102
127.
Correal JF, Echeverry JS (2015) Evaluation of selected mechanical properties of new laminated guadua mats for structural use. In: 10th World bamboo congress
128.
Banga H, Singh VK, Choudhary SK (2015) Fabrication and study of mechanical properties of bamboo fibre reinforced bio-composites. Innov Syst Des Eng 6(1):84–99
129.
R M, Bansal S, Raichurkar P (2016) Experimental study of bamboo using banana and linen fibre reinforced polymeric composites. Perspect Sci 8:313–316
130.
Cassano R, Trombino S (2012) Modification of cotton fiber for biomedical applications. In: Cotton: cultivation, varieties and uses, pp 165–182
131.
Xi LX, Qin DC (2012) The antibacterial performance of natural bamboo fiber and its influencing factors. In: Proceedings of the 55th international convention of society of wood science and technology August 27–31, 2012 Beijing, China, 2012, pp 1–8
Metadata
Title
Recent developments in bamboo fiber-based composites: a review
Authors
Adamu Muhammad
Md.Rezaur Rahman
Sinin Hamdan
Khairuddin Sanaullah
Publication date
23-08-2018
Publisher
Springer Berlin Heidelberg
Published in
Polymer Bulletin / Issue 5/2019
Print ISSN: 0170-0839
Electronic ISSN: 1436-2449
DOI
https://doi.org/10.1007/s00289-018-2493-9

Other articles of this Issue 5/2019

Polymer Bulletin 5/2019 Go to the issue

Original Paper

Effect of boron acrylate monomer content and multi-acrylate functional boron methacrylate on adhesive performance for water-borne acrylic polymers

Original Paper

Comparison of plain and indoline modified mercury film electrodes for determination of lead, cadmium and copper in urine samples by anodic stripping voltammetry

Original Paper

Synthesis of ascorbic acid-doped oligoaniline, its drug composites and study of their antibacterial behavior

Original Paper

Preparation, characterization, and antimicrobial activity of poly(γ-glutamic acid)/chitosan blends

Original Paper

Subsurface mechanical properties and subsurface creep behaviour of modified nanoclay-based wood–plastic composites studied by nanoindentation

Original Paper

Exfoliated graphene-dispersed poly (lactic acid)-based nanocomposite sensors for ethanol detection

Premium Partners

    Image Credits