Top

Journal of Materials Science

Published in:

30-04-2018 | Mechanochemical Synthesis

Sintering and electrical properties of commercial PZT powders modified through mechanochemical activation

Authors: Zhuohao Xiao, Xianglin Li, Xiaofeng Dong, Jianfeng Tang, Chuanhu Wang, Tianshu Zhang, Sean Li, Ling Bing Kong

Published in: Journal of Materials Science | Issue 19/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The effect of high-energy ball mechanochemical activation on microstructure and electrical properties of PZT from commercial PZT powder has been studied in this paper. The mechanochemical treatment destroys the large particles and refines the grains of the commercial PZT powder. The milled PZT powder can be fully sintered at a very low temperature of 950 °C, which is much lower than that of the pristine powder. More importantly, the grain growth is effectively prevented, while electrical properties of the final PZT ceramics are well maintained, due to the significant reduction in sintering temperature. It is believed that this technique can be readily extended to other materials.

previous article Structural characterization of antifungal CaZn2(OH)6·2H2O nanoparticles obtained via mechanochemical processing

next article The influence of mechanical activation on the nanostructure of zeolite

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Haertling GH (1999) Ferroelectric ceramics: history and technology. J Am Ceram Soc 82(4):797–818. https://doi.org/10.1111/j.1151-2916.1999.tb01840.x CrossRef

Uchino K (1998) Materials issues in design and performance of piezoelectric actuators: an overview. Acta Mater 46(11):3745–3753. https://doi.org/10.1016/s1359-6454(98)00102-5 CrossRef

Wang QM, Cross LE (1999) Tip deflection and blocking force of soft PZT-based cantilever RAINBOW actuators. J Am Ceram Soc 82(1):103–110. https://doi.org/10.1111/j.1151-2916.1999.tb01729.x CrossRef

Goudarzi H, Baghshahi S (2017) PZT ceramics prepared through a combined method of B-site precursor and wet mechanically activated calcinate in a planetary ball mill. Ceram Int 43(4):3873–3878. https://doi.org/10.1016/j.ceramint.2016.12.050 CrossRef

Zhu DP, Jiang QH, Li YW (2017) The effect of temperature and loading frequency on the converse piezoelectric response of soft PZT ceramics. Mater Res Express 4(12):125705. https://doi.org/10.1088/2053-1591/aa9dbc CrossRef

Morten B, Decicco G, Prudenziati M (1992) Resonant pressure sensor based on piezoelectric properties of ferroelectric thick-films. Ensor Actuat A Phys 31(1–3):153–158. https://doi.org/10.1016/0924-4247(92)80096-l CrossRef

Bernardo MS, Malic B, Kuscer D (2015) PZT-based thick films prepared by electrophoretic deposition from suspensions with different alcohol-based solvents. J Electrochem Soc 162(11):3040–3048. https://doi.org/10.1149/2.0151511jes CrossRef

Liang RJ, Wang QM (2015) High sensitivity piezoelectric sensors using flexible PZT thick-film for shock tube pressure testing. Ensor Actuat A Phys 235:317–327. https://doi.org/10.1016/j.sna.2015.09.027 CrossRef

Ouyang J, Cormier D, Williams SA, Borkholder DA (2016) Photonic sintering of aerosol jet printed lead zirconate titanate (PZT) thick films. J Am Ceram Soc 99(8):2569–2577. https://doi.org/10.1111/jace.14272 CrossRef

10.

Wang DL, Ou-Yang J, Guo WE, Yang XF, Zhu BP (2017) Novel fabrication of PZT thick films by an oil-bath based hydrothermal method. Ceram Int 43(12):9573–9576. https://doi.org/10.1016/j.ceramint.2017.04.119 CrossRef

11.

Delimova L, Guschina E, Zaitseva N et al (2017) Effect of seed layer with low lead content on electrical properties of PZT thin films. J Mater Res 32(9):1618–1627. https://doi.org/10.1557/jmr.2017.156 CrossRef

12.

Podgorny Y, Vorotilov K, Sigov A (2016) Estimation of steady-state leakage current in polycrystalline PZT thin films. AIP Adv 6(9):095025. https://doi.org/10.1063/1.4964147 CrossRef

13.

Xiao M, Zhang ZB, Zhang WK, Zhang P (2018) Effect of La and W dopants on dielectric and ferroelectric properties of PZT thin films prepared by sol-gel process. Appl Phys A Mater 124(1):8. https://doi.org/10.1007/s00339-017-1428-x CrossRef

14.

Kambale RC, Han G, Yoon WH et al (2014) Reliability of ferroelectric multilayer PZT thick films fabricated by aerosol deposition. Ferroelectrics 470(1):183–193. https://doi.org/10.1080/00150193.2014.923253 CrossRef

15.

Wang H, Wereszczak AA, Lin HT (2009) Fatigue response of a PZT multilayer actuator under high-field electric cycling with mechanical preload. J Appl Phys 105(1):014112. https://doi.org/10.1063/1.3065097 CrossRef

16.

Xu TB, Siochi EJ, Kang JH et al (2013) Energy harvesting using a PZT ceramic multilayer stack. Smart Mater Struct 22(6):065015. https://doi.org/10.1088/0964-1726/22/6/065015 CrossRef

17.

Zhu MM, Du ZH, Li HL et al (2017) Tuning electro-optic susceptibity via strain engineering in artificial PZT multilayer films for high-performance broadband modulator. Appl Surf Sci 425:1059–1065. https://doi.org/10.1016/j.apsusc.2017.07.088 CrossRef

18.

Kesavan AV, Ramamurthy PC (2017) Source materials grain size effect on electrode microstructure and its effect on conventional bulk hetero-junction photovoltaics. Sol Energy Mater Sol Cells 172:244–251. https://doi.org/10.1016/j.solmat.2017.07.044 CrossRef

19.

Courey KJ, Asfour SS, Onar A, Bayliss JA, Ludwig LL, Wright MC (2010) Estimating the probability of electrical short circuits from tin whiskers. In: The 2010 aircraft airworthiness and sustainment conference, pp 1–5

20.

Maiwa H, Kimura O, Shoji K, Ochiai H (2005) Low temperature sintering of PZT ceramics without additives via an ordinary ceramic route. J Eur Ceram Soc 25(12):2383–2385. https://doi.org/10.1016/j.jeurceramsoc.2005.03.066 CrossRef

21.

Das RN, Pathak A, Saha SK, Sannigrahi S, Pramanik P (2001) Preparation, characterization and property of fine PZT powders from the poly vinyl alcohol evaporation route. Mater Res Bull 36(9):1539–1549. https://doi.org/10.1016/s0025-5408(01)00505-0 CrossRef

22.

Zhang XG, Liu J, Luo Y, Chen C (2005) The preparation of PZT ultra-fine powders by sol-gel method and the dispersivity research. Rare Metal Mat Eng 34:194–197

23.

Xu G, Zhao GL, Ren ZH, Shen G, Han GR (2006) PVA assisted synthesis of nanosized perovskite PZT powder by a two-stage precipitation route. Mater Lett 60(5):685–688. https://doi.org/10.1016/j.matlet.2005.09.060 CrossRef

24.

Ghasemifard M, Hosseini SM, Zak AK, Khorrami GH (2009) Microstructural and optical characterization of PZT nanopowder prepared at low temperature. Physica E 41(3):418–422. https://doi.org/10.1016/j.physe.2008.09.017 CrossRef

25.

Kong LB, Ma J, Zhu W, Tan OK (2001) Preparation of Bi₄Ti₃O₁₂ ceramics via a high-energy ball milling process. Mater Lett 51(2):108–114. https://doi.org/10.1016/s0167-577x(01)00274-9 CrossRef

26.

Kong LB, Ma J, Huang HT, Zhu W, Tan OK (2001) Lead zirconate titanate ceramics derived from oxide mixture treated by a high-energy ball milling process. Mater Lett 50(2–3):129–133. https://doi.org/10.1016/s0167-577x(00)00429-8 CrossRef

27.

Kong LB, Ma J, Zhu W, Tan OK (2002) Preparation of PMN-PT ceramics via a high-energy ball milling process. J Alloys Compd 336(1–2):242–246. https://doi.org/10.1016/s0925-8388(01)01873-4 CrossRef

28.

Zhang L, Xu Z, Feng YJ, Hu YY, Yao X (2008) Synthesis, sintering and characterization of PNZST ceramics from high-energy ball milling process. Ceram Int 34(4):709–713. https://doi.org/10.1016/j.ceramint.2007.09.041 CrossRef

29.

Kong LB, Zhang TS, Ma J, Boey F (2008) Progress in synthesis of ferroelectric ceramic materials via high-energy mechanochemical technique. Prog Mater Sci 53(2):207–322. https://doi.org/10.1016/j.pmatsci.2007.05.001 CrossRef

30.

Dey S, Dey SK, Ghosh B, Reddy VR, Kumar S (2013) Structural, microstructural, magnetic and hyperfine characterization of nanosized Ni_0.5Zn_0.5Fe₂O₄ synthesized by high energy ball-milling method. Mater Chem Phys 138(2–3):833–842. https://doi.org/10.1016/j.matchemphys.2012.12.067 CrossRef

31.

Liu C, Liu P (2014) Microstructure and dielectric properties of BST ceramics derived from high-energy ball-milling. J Alloys Compd 584:114–118. https://doi.org/10.1016/j.jallcom.2013.09.031 CrossRef

32.

Sangsubun C (2015) Fabrication and characterization of bismuth sodium titanate ceramics by high-energy ball milling technique. Ceram Int 41:S180–S184. https://doi.org/10.1016/j.ceramint.2015.03.123 CrossRef

33.

Kim S, Noh JK, Aykol M et al (2016) Layered-layered-spinel cathode materials prepared by a high energy ball-milling process for lithium-ion batteries. ACS Appl Mater Inter 8(1):363–370. https://doi.org/10.1021/acsami.5b08906 CrossRef

34.

Senna M, Billik P, Yermakov AY et al (2017) Synthesis and magnetic properties of CuAlO₂ from high-energy ball-milled Cu₂O–Al₂O₃ mixture. J Alloys Compd 695:2314–2323. https://doi.org/10.1016/j.jallcom.2016.11.097 CrossRef

35.

Kong LB, Ma J, Zhu W, Tan OK (2000) Highly enhanced sinterability of commercial PZT powders by high-energy ball milling. Mater Lett 46(5):274–280. https://doi.org/10.1016/s0167-577x(00)00185-3 CrossRef

36.

Shen TD, Koch CC, McCormick TL, Nemanich RJ, Huang JY, Huang JG (1995) The structure and property characteristics of amorphous nanocrystalline silicon produced by ball-milling. J Mater Res 10(1):139–148. https://doi.org/10.1557/jmr.1995.0139 CrossRef

Title: Sintering and electrical properties of commercial PZT powders modified through mechanochemical activation
Authors: Zhuohao Xiao
Xianglin Li
Xiaofeng Dong
Jianfeng Tang
Chuanhu Wang
Tianshu Zhang
Sean Li
Ling Bing Kong
Publication date: 30-04-2018
Publisher: Springer US
Published in: Journal of Materials Science / Issue 19/2018
Print ISSN: 0022-2461
Electronic ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-018-2360-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 19/2018

BaF-benzenedicarboxylate: the first mechanochemical synthesis of a new coordination polymer with a direct Ba–F bond

Rodlike CeO2/carbon nanocomposite derived from metal–organic frameworks for enhanced supercapacitor applications

Mechanical activation of pyrophyllite ore for aluminum extraction by acidic leaching

Effect of ball milling on the first hydrogenation of TiFe alloy doped with 4 wt% (Zr + 2Mn) additive

F anion dynamics in cation-mixed nanocrystalline LaF3: SrF2

A comprehensive study and comparison of four types of zwitterionic hydrogels

Premium Partners