Top

Journal of Materials Engineering and Performance

Published in:

09-09-2015

Study of Static Recrystallization Behavior of a Nitrogen-Alloyed Ultralow Carbon Austenitic Stainless Steel by Experiment and Simulation

Authors: Xiaoya Yang, An He, Congfeng Wu, Shilei Li, Hailong Zhang, Xitao Wang

Published in: Journal of Materials Engineering and Performance | Issue 11/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Static recrystallization (SRX) behavior of a nitrogen-alloyed ultralow carbon austenitic stainless steel was studied on a Gleeble-1500D thermal-simulator by two-step hot compression tests. Deformation temperatures of 1173-1473 K, deformation strains of 0.051-0.105, strain rates of 0.01-1 s⁻¹, and inter-step times of 1-100 s were selected as the deformation conditions to investigate the effects of deformation parameters on SRX behavior. Besides, the influences of initial grain size on SRX behavior were studied. The results show that deformation temperature and strain have greater influences on SRX behavior than strain rate and initial grain size. Based on true stress-true strain data obtained from the experiments, SRX kinetics equation was determined. In addition, the established SRX kinetics equation was introduced into finite element simulation software DEFORM-3D to perform the two-step compression deformation. Furthermore, SRX kinetics equation was modified for improving the accuracy of finite element simulation, and the modified SRX kinetics equation was verified.

previous article Effect of Heat Treatment on the Microstructure and Properties of Deformation-Processed Cu-7Cr In Situ Composites

next article Numerical Simulation of Tension Properties for Al-Cu Alloy Friction Stir-Welded Joints with GTN Damage Model

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

A. He, G.L. Xie, X.Y. Yang, X.T. Wang, and H.L. Zhang, A Physically-Based Constitutive Model for a Nitrogen Alloyed Ultralow Carbon Stainless Steel, Comput. Mater. Sci., 2015, 98, p 64–69CrossRef

J.Z. Lu, K.Y. Luo, Y.K. Zhang, G.F. Sun, Y.Y. Gu, J.Z. Zhou, X.D. Ren, X.C. Zhang, L.F. Zhang, and K.M. Chen, Grain Refinement Mechanism of Multiple Laser Shock Processing Impacts on ANSI, 304 Stainless Steel, Acta Mater., 2010, 58, p 5354–5362CrossRef

R. Ueji, N. Tsuchida, D. Terada, N. Tsuji, Y. Tanaka, A. Takemura, and K. Kunishige, Tensile Properties and Twinning Behavior of High Manganese Austenitic Steel with Fine-Grained Structure, Scr. Mater., 2008, 59, p 963–966CrossRef

H. Mirzadeh and A. Najafizadeh, Correlation Between Processing Parameters and Strain-Induced Martensitic Transformation in Cold Worked AISI, 301 Stainless Steel, Mater. Charact., 2008, 59, p 1650–1654CrossRef

R.D.K. Misra, J.S. Shah, S. Mali, P.K.C. Venkata Surya, M.C. Somani, and L.P. Karjalainen, Phase Reversion Induced Nanograined Austenitic Stainless Steels: Microstructure, Reversion and Deformation Mechanisms, Mater. Sci. Technol., 2013, 29, p 1185–1192CrossRef

H. Mirzadeh and A. Najafizadeh, Modeling the Reversion of Martensite in the Cold Worked AISI, 304 Stainless Steel by Artificial Neural Networks, Mater. Des., 2009, 30, p 570–573CrossRef

A. Dehghan-Manshadi, M.R. Barnett, and P.D. Hodgson, Hot Deformation and Recrystallization of Austenitic Stainless Steel: Part I. Dynamic Recrystallization, Metall. Mater. Trans. A, 2008, 39, p 1359–1370CrossRef

A. Momeni, K. Dehghani, H. Keshmiri, and G.R. Ebrahimi, Hot Deformation Behavior and Microstructural Evolution of a Superaustenitic Stainless Steel, Mater. Sci. Eng. A, 2010, 527, p 1605–1611CrossRef

M. Mirzaee, H. Keshmiri, G.R. Ebrahimi, and A. Momeni, Dynamic Recrystallization and Precipitation in Low Carbon Low Alloy Steel 26NiCrMoV 14-5, Mater. Sci. Eng. A, 2012, 551, p 25–31CrossRef

10.

X.M. Chen, Y.C. Lin, D.X. Wen, J.L. Zhang, and M. He, Dynamic Recrystallization Behavior of a Typical Nickel-Based Superalloy During Hot Deformation, Mater. Des., 2014, 57, p 568–577CrossRef

11.

M.S. Chen, Y.C. Lin, and X.S. Ma, The Kinetics of Dynamic Recrystallization of 42CrMo Steel, Mater. Sci. Eng. A, 2012, 556, p 260–266CrossRef

12.

M.H. Maghsoudi, A. Zarei-Hanzaki, P. Changizian, and A. Marandi, Metadynamic Recrystallization Behavior of AZ61 Magnesium Alloy, Mater. Des., 2014, 57, p 487–493CrossRef

13.

A.M. Elwazri, E. Essadiqi, and S. Yue, Kinetics of Metadynamic Recrystallization in Microalloyed Hypereutectoid Steels, ISIJ Int., 2004, 44, p 744–752CrossRef

14.

P. Uranga, A.I. Fernandez, B. Lopez, and J.M. Rodriguez-Ibabe, Transition Between Static and Metadynamic Recrystallization Kinetics in Coarse Nb Microalloyed Austenite, Mater. Sci. Eng. A, 2003, 345, p 319–327CrossRef

15.

Y.G. Liu, J. Liu, M.Q. Li, and H. Lin, The Study on Kinetics of Static Recrystallization in the Two-Stage Isothermal Compression of 300 M Steel, Comput. Mater. Sci., 2014, 84, p 115–121CrossRef

16.

A. Takayama, X. Yang, H. Miura, and T. Sakai, Continuous Static Recrystallization in Ultrafine-Grained Copper Processed by Multi-directional Forging, Mater. Sci. Eng. A, 2008, 478, p 221–228CrossRef

17.

Y.C. Lin, M.S. Chen, and J. Zhong, Study of Static Recrystallization Kinetics in a Low Alloy Steel, Comput. Mater. Sci., 2008, 44, p 316–321CrossRef

18.

S.H. Zahiri, S.M. Byon, S. Kim, Y. Lee, and P.D. Hodgson, Static and Metadynamic Recrystallization of Interstitial Free Steels During Hot Deformation, ISIJ Int., 2004, 44, p 1918–1923CrossRef

19.

F.B. Han, B. Tang, H.C. Kou, L. Cheng, J.S. Li, and Y. Feng, Static Recrystallization Simulations by Coupling Cellular Automata and Crystal Plasticity Finite Element Method Using a Physically Based Model for Nucleation, J. Mater. Sci., 2014, 49, p 3253–3267CrossRef

20.

Y.C. Lin and M.S. Chen, Study of Microstructural Evolution During Static Recrystallization in a Low Alloy Steel, J. Mater. Sci., 2009, 44, p 835–842CrossRef

21.

X. Li, P. Yang, L.N. Wang, L. Meng, and F. Cui, Orientational Analysis of Static Recrystallization at Compression Twins in a Magnesium Alloy AZ31, Mater. Sci. Eng. A, 2009, 517, p 160–169CrossRef

22.

C.W. Zheng, N.M. Xiao, D.Z. Li, and Y.Y. Li, Mesoscopic Modeling of Austenite Static Recrystallization in a Low Carbon Steel Using a Coupled Simulation Method, Comput. Mater. Sci., 2009, 45, p 568–575CrossRef

23.

X. Huan, K. Suzuki, Y. Chino, and M. Mabuchi, Influence of Rolling Temperature on Static Recrystallization Behavior of AZ31 Magnesium Alloy, J. Mater. Sci., 2012, 47, p 4561–4567CrossRef

24.

M.S. Salehi and S. Serajzadeh, Simulation of Static Recrystallization in Non-Isothermal Annealing Using a Coupled Cellular Automata and Finite Element Model, Comput. Mater. Sci., 2012, 53, p 145–152CrossRef

25.

W.H. Zhang, S.H. Sun, D.L. Zhao, B.Z. Wang, Z.H. Wang, and W.T. Fu, Hot Deformation Behavior of a Nb-Containing 316LN Stainless Steel, Mater. Des., 2011, 32, p 4173–4179CrossRef

26.

B.F. Guo, H.P. Ji, X.G. Liu, L. Gao, R.M. Dong, M. Jin, and Q.H. Zhang, Research on Flow Stress During Hot Deformation Process and Processing Map for 316LN Austenitic Stainless Steel, J. Mater. Eng. Perform., 2012, 21, p 1455–1461CrossRef

27.

Y.L. Guo, E.H. Han, and J.Q. Wang, Effects of Forging and Heat Treatments on the Microstructure and Oxidation Behavior of 316LN Stainless Steel in High Temperature Water, J. Mater. Sci. Technol., 2015, 31, p 403–412CrossRef

28.

H.X. Pei, S.L. Li, L.X. Wang, H.L. Zhang, Z.D. Zhao, and X.T. Wang, Influence of Initial Microstructures on Deformation Behavior of 316LN Austenitic Steels at 400-900 °C, J. Mater. Eng. Perform., 2015, 24, p 694–699CrossRef

29.

F. Chen, K. Qi, Z.S. Cui, and X.M. Lai, Modeling the Dynamic Recrystallization in Austenitic Stainless Steel Using Cellular Automaton Method, Comput. Mater. Sci., 2014, 83, p 331–340CrossRef

30.

J. Miao, B. Lu, X.G. Liu, H. Guo, H.P. Ji, and B.F. Guo, Static Recrystallization Behavior of 316LN Austenitic Stainless Steel, J. Iron Steel Res. Int., 2013, 20, p 67–72

31.

H. Mirzadeh and A. Najafizadeh, Prediction of the Critical Conditions for Initiation of Dynamic Recrystallization, Mater. Des., 2010, 31, p 1174–1179CrossRef

32.

H. Mirzadeh, J.M. Cabrera, A. Najafizadeh, and P.R. Calvillo, EBSD Study of a Hot Deformed Austenitic Stainless Steel, Mater. Sci. Eng. A, 2012, 538, p 236–245CrossRef

33.

P.W. Bridgman, Studies in Large Plastic Flow and Fracture, McGraw-Hill, New York, 1952

34.

H.J. Mao, R. Zhang, L. Hua, and F. Yin, Study of Static Recrystallization Behaviors of GCr15 Steel Under Two-Pass Hot Compression Deformation, J. Mater. Eng. Perform., 2015, 24, p 930–935CrossRef

35.

W.P. Sun and E.B. Hawbolt, Comparison Between Static and Metadynamic Recrystallization-an Application to the Hot Rolling of Steels, ISIJ Int., 1997, 37, p 1000–1009CrossRef

36.

Z.X. Xie, H.Y. Gao, J. Wang, Y. Yu, Y. Fang, and B.D. Sun, Static Recrystallization Behavior of Twin Roll Cast Low-Carbon Steel Strip, J. Iron Steel Res. Int., 2011, 18, p 45–51CrossRef

37.

B. Ma, Y. Peng, B. Jia, and Y.F. Liu, Static Recrystallization Kinetics Model After Hot Deformation of Low-Alloy Steel Q345B, J. Iron Steel Res. Int., 2010, 17, p 61–66CrossRef

38.

E. Dupin, A. Yanagida, and J. Yanagimoto, Modeling Static and Dynamic Kinetics of Microstructure Evolution in Type 316 Stainless Steel, Steel Res. Int., 2014, 85, p 1099–1108CrossRef

39.

A. Yanina, S. Guk, W. Müller, R. Kawalla, and C. Weigelt, Dynamic and Static Softening of Sintered MgO-PSZ/TRIP-Matrix Composites with up to 10 vol.% ZrO₂, Steel Res. Int., 2011, 82, p 1158–1165CrossRef

40.

H.Y. Wu, L.X. Du, Z.R. Ai, and X.H. Liu, Static Recrystallization and Precipitation Behavior of a Weathering Steel Microalloyed with Vanadium, J. Mater. Sci. Technol., 2013, 29, p 1197–1203CrossRef

41.

Y.B. Chun and S.H. Wang, Static Recrystallization of Warm-Rolled Pure Ti Influenced by Microstructural Inhomogeneity, Acta Mater., 2008, 56, p 369–379CrossRef

Title: Study of Static Recrystallization Behavior of a Nitrogen-Alloyed Ultralow Carbon Austenitic Stainless Steel by Experiment and Simulation
Authors: Xiaoya Yang
An He
Congfeng Wu
Shilei Li
Hailong Zhang
Xitao Wang
Publication date: 09-09-2015
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 11/2015
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-015-1705-9

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11/2015

Effect of 0.2 and 0.5% Ti on the microstructure and mechanical properties of 13Cr supermartensitic stainless steel

The Tribological Behaviors of Three Films Coated on Biomedical Titanium Alloy by Chemical Vapor Deposition

Characterization of GNP-Containing Al2O3 Nanocomposites Fabricated via High Frequency-Induction Heat Sintering Route

Polypropylene Glycol-Silver Nanoparticle Composites: A Novel Anticorrosion Material for Aluminum in Acid Medium

Derivation of Process Path Functions in Machining of Al Alloy 7075

Effect of Pre-aging on Stress Corrosion Cracking of Spray-formed 7075 Alloy in Retrogression and Re-aging

Premium Partners