Issue 11/2015
Content (47 Articles)
Gamma Prime Stability in Haynes 282: Theoretical and Experimental Considerations
Jeffrey A. Hawk, Tian-Le Cheng, John S. Sears, Paul D. Jablonski, You-Hai Wen
Electrolytic Synthesis and Characterization of Electrocatalytic Ni-W Alloy
Liju Elias, Keith Scott, A. Chitharanjan Hegde
Nondestructive Evaluation of Friction Stir-Welded Aluminum Alloy to Coated Steel Sheet Lap Joint
H. Das, A. Kumar, K. V. Rajkumar, T. Saravanan, T. Jayakumar, Tapan Kumar Pal
Comparative Studies on Al-Based Composite Powder Reinforced with Nano Garnet and Multi-wall Carbon Nanotubes
M. Raviathul Basariya, V. C. Srivastava, N. K. Mukhopadhyay
Polypropylene Glycol-Silver Nanoparticle Composites: A Novel Anticorrosion Material for Aluminum in Acid Medium
Moses M. Solomon, Saviour A. Umoren, Aniekemeabasi U. Israel, Eno E. Ebenso
Martensitic Transformation During Compressive Deformation of a Non-conventional Stainless Steel and Its Quantitative Assessment
R. Kreethi, P. Sampark, Goutam Kumar Majhi, Krishna Dutta
Extrinsic Influence of Environment-Induced Degradation on Load Carrying Capacity of Steel Beams
Sunil Gowda, A. Patnaik, J. Payer, T. S. Srivatsan
Characterization of GNP-Containing Al2O3 Nanocomposites Fabricated via High Frequency-Induction Heat Sintering Route
Iftikhar Ahmad, Mohammad Islam, Tayyab Subhani, Yanqiu Zhu
Effects of Al3(Sc,Zr) and Shear Band Formation on the Tensile Properties and Fracture Behavior of Al-Mg-Sc-Zr Alloy
Hongfeng Huang, Feng Jiang, Jiang Zhou, Lili Wei, Jiping Qu, Lele Liu
Effect of 0.2 and 0.5% Ti on the microstructure and mechanical properties of 13Cr supermartensitic stainless steel
Yong Lian, Jinfeng Huang, Jin Zhang, Cheng Zhang, Wen Gao, Chao Zhao
Synthesis of Hierarchical Porous Zn-Doped SnO2 Spheres and Their Photocatalytic Properties
Jing Wang, Huiqing Fan, Huawa Yu
Characterization of Tensile Properties, Limiting Strains, and Deep Drawing Behavior of AA5754-H22 Sheet at Elevated Temperature
Sudhy S. Panicker, Har Govind Singh, Sushanta Kumar Panda, Richard Dashwood
Effect of Preheat Treatment on the Texture Evolution During Cold Rolling of AA 3003 Aluminum Alloy
W. X. Wang, M. Ma, H. L. Li, J. X. Zhang, W. C. Liu
Study on the Indentation Creep Behavior of Mg-4Al-RE-0.8Ca Magnesium Alloy
Yaocheng Zhang, Li Yang, Zedong Huang, Jun Dai
Microstructural Investigation of Friction-Stir-Welded 7005 Aluminum Alloy
Xuesong Xu, Yan Lu, Feiyan Zheng, Bin Chen
Microstructure Evolution of 1050 Commercial Purity Aluminum Processed by High-Strain-Rate Deformation
Yang Yang, Yadong Chen, Fei Ma, Haibo Hu, Qingming Zhang, Tiegang Tang, Xiaowei Zhang
Effect of Quenching Process on the Microstructure and Hardness of High-Carbon Martensitic Stainless Steel
Qin-tian Zhu, Jing Li, Cheng-bin Shi, Wen-tao Yu
Effect of Surplus Phase on the Microstructure and Mechanical Properties in Al-Cu-Mg-Ag Alloys with High Cu/Mg Ratio
Xiaofeng Xu, Yuguang Zhao, Xudong Wang, Ming Zhang, Yuheng Ning
Effect of Pre-aging on Stress Corrosion Cracking of Spray-formed 7075 Alloy in Retrogression and Re-aging
Rui-ming Su, Ying-dong Qu, Jun-hua You, Rong- de Li
Study on Corrosion Performance of Cu-Te-Se Alloys in a 3.5% Sodium Chloride Solution
Lin Jiao, Meng Li, Tao Zeng, Dachuan Zhu
Effect of Heat Treatment on the Microstructure and Properties of Deformation-Processed Cu-7Cr In Situ Composites
Keming Liu, Zhengyi Jiang, Haitao Zhou, Deping Lu, Andrej Atrens, Yanling Yang
Study of Static Recrystallization Behavior of a Nitrogen-Alloyed Ultralow Carbon Austenitic Stainless Steel by Experiment and Simulation
Xiaoya Yang, An He, Congfeng Wu, Shilei Li, Hailong Zhang, Xitao Wang
Numerical Simulation of Tension Properties for Al-Cu Alloy Friction Stir-Welded Joints with GTN Damage Model
Guo-Qin Sun, Feng-Yang Sun, Fang-Li Cao, Shu-Jun Chen, Mark E. Barkey
Effect of Ultrasonic Vibration on Compression Behavior and Microstructural Characteristics of Commercially Pure Aluminum
Saeed Bagherzadeh, Karen Abrinia
Prediction of Fracture Initiation in Hot Compression of Burn-Resistant Ti-35V-15Cr-0.3Si-0.1C Alloy
Saifei Zhang, Weidong Zeng, Dadi Zhou, Yunjin Lai
Effect of pH Value on the Electrochemical and Stress Corrosion Cracking Behavior of X70 Pipeline Steel in the Dilute Bicarbonate Solutions
Z. Y. Cui, Z. Y. Liu, L. W. Wang, H. C. Ma, C. W. Du, X. G. Li, X. Wang
Radiation Degradation of Polytetrafluoroethylene-Lead Composites
Sanat Karmakar, Falix Lawrence, C. Mallika, U. Kamachi Mudali
Addendum to: Uniform Elongation and the Stress-Strain Flow Curve of Steels Calculated from Hardness Using Empirical Correlations
Erik J. Pavlina, Chester J. Van Tyne
Corrosion Behavior of Alloy 625 in Simulated Nuclear High-Level Waste Medium
S. Girija, T. Nandakumar, U. Kamachi Mudali
Effects of Deep Cryogenic Treatment on the Wear Resistance and Mechanical Properties of AISI H13 Hot-Work Tool Steel
Adem Çiçek, Fuat Kara, Turgay Kıvak, Ergün Ekici, İlyas Uygur
Studies on Thermal and Mechanical Properties of Epoxy-Silicon Oxide Hybrid Materials
P. K. Ghosh, Kaushal Kumar, Arun Kumar
Corrosion Behavior of Arc-Sprayed Zn-Al Coating in the Presence of Sulfate-Reducing Bacteria in Seawater
Sheng Hong, Yuping Wu, Wenwen Gao, Jianfeng Zhang, Yujiao Qin
Effect of B-Mo-W Complex Inhibitor on Corrosion of Mild Steel in 55% LiBr Solution
Jielan Li, Chenghao Liang, Naibao Huang
The Tribological Behaviors of Three Films Coated on Biomedical Titanium Alloy by Chemical Vapor Deposition
Song Wang, Zhenhua Liao, Yuhong Liu, Weiqiang Liu
Effect of Electromagnetic Field on Microstructure and Properties of Bulk AlCrFeNiMo0.2 High-Entropy Alloy
Yong Dong, Li Jiang, Zhongyi Tang, Yiping Lu, Tingju Li
Tribological Behavior of TiAl Matrix Composites with MoO3 Tabular Crystal
Ao Zhang, Xiaoliang Shi, Wenzheng Zhai, Kang Yang, Zhihai Wang
Derivation of Process Path Functions in Machining of Al Alloy 7075
A. Tabei, D. S. Shih, H. Garmestani, S. Y. Liang
Improvement of Weld Characteristics by Laser-Arc Double-Sided Welding Compared to Single Arc Welding
Zhenglong Lei, Kezhao Zhang, Xue Hu, Yuhe Yang, Yanbin Chen, Yichao Wu
Development of Highly Ductile Spheroidized Steel from High C (0.61 wt.% C) Low-Alloy Steel
S. Monia, A. Varshney, Gouthama, S. Sangal, S. Kundu, S. Samanta, K. Mondal
Microhardness Distribution and Microstructural Evolution in Pure Aluminum Subjected to Severe Plastic Deformation: Elliptical Cross-Sectioned Spiral Equal-Channel Extrusion (ECSEE)
Jinghui Li, Fuguo Li, Xinkai Ma, Han Chen, Zhanchao Ma, Jiang Li
Characteristics of Friction Welding Between Solid Bar of 6061 Al Alloy and Pipe of Al-Si12CuNi Al Cast Alloy
M. Kimura, H. Sakaguchi, M. Kusaka, K. Kaizu, T. Takahashi
Microstructural and Mechanical Properties of In Situ WC-Fe/Fe Composites
Lisheng Zhong, Yinglin Yan, Vladimir E. Ovcharenko, Xiaolong Cai, Xi Zhang, Yunhua Xu
Equal Channel Angular Extrusion of AA 6063 Using Conventional Direct Extrusion Press
Cheng-Hsien Liu, Hsin-Chih Lin
Shot Peening and Thermal Stress Relaxation in 17-4 PH Stainless Steel
Enwei Qin, Guoxing Chen, Ziming Tan, Shuhui Wu