Top

Journal of Materials Engineering and Performance

Published in:

30-09-2015

Martensitic Transformation During Compressive Deformation of a Non-conventional Stainless Steel and Its Quantitative Assessment

Authors: R. Kreethi, P. Sampark, Goutam Kumar Majhi, Krishna Dutta

Published in: Journal of Materials Engineering and Performance | Issue 11/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This report aims to examine the extent of deformation-induced phase transformation in a non-conventional austenitic stainless steel known as ISO/TR 15510 X12CrMnNiN17-7-5, upon compressive loading at room temperature. Experiments were carried out under varying length to diameter ratios (0.8, 1.0, 1.2, 1.4, and 1.6). TFE (Tetrafluoroethylene)-fluorocarbon tapes were used at specimen-platen interfaces to reduce the effect of friction. The results indicate that the lubrication was effective up to 15% of strain. Optical microscopy and x-ray diffraction (XRD) studies indicated martensitic phase transformation in the deformed specimens. The extent of phase transformation was determined by analyzing the XRD peaks using integrated intensity of the corresponding phases. The results are correlated with the extent of deformation in the respective samples. The presence of γ and α′-martensite on the deformed samples has been substantiated by some limited experiments using transmission electron microscopy.

previous article Polypropylene Glycol-Silver Nanoparticle Composites: A Novel Anticorrosion Material for Aluminum in Acid Medium

next article Extrinsic Influence of Environment-Induced Degradation on Load Carrying Capacity of Steel Beams

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

A. Nayar, The Steel Hand Book, 2nd ed., Tata MC Graw-Hill company limited, New Delhi, 1997

W.S. Lee and C.F. Lin, The Morphologies and Characteristics of Impact-Induced Martensite in 304L Stainless Steel, Scripta Mater., 2000, 43, p 777–782CrossRef

A.K. De, D.C. Murdock, M.C. Mataya, J.G. Speer, and D.K. Matlock, Quantitative Measurement of Deformation-Induced Martensite in 304 Stainless Steel by X-ray Diffraction, Scr. Mater., 2004, 50(12), p 1445–1449CrossRef

P.L. Mangonon and G. Thomas, Structure and Properties of Thermal-Mechanically Treated 304 Stainless Steel, Metall. Trans., 1970, 1, p 1587–1594CrossRef

E. Nagy, V. Mertinger, F. Tranta, and J. Solyom, Deformation Induced Martensite Transformation in Stainless Steels, Mater. Sci. Eng., A, 2004, 378, p 308–313CrossRef

A. Das, S. Sivaprasad, M. Ghosh, P.C. Chakraborti, and S. Tarafder, Morphologies and Characteristics of Deformation Induced Martensite During Tensile Deformation of 304LN Stainless Steel, Mater. Sci. Eng., 2007, A486(1-2), p 283–286

G.B. Olson and M. Cohen, A Mechanism for the Strain-Induced Nucleation of Martensitic Transformations, J. Less-Common Met., 1972, 28, p 107–118CrossRef

G.J. Coubrough, D.K. Matlock, and C.J. Van Tyne, Formability of Type 304 Stainless Steel, Soc. Automot. Eng., 1993, 930814, p 279–289

T. Suzuki, H. Kojima, K. Suzuki, and M. Ichihara, An Experimental Study of the Martensite Nucleation and Growth in 18/8 Stainless Steel, Acta Metall., 1977, 25(10), p 1151–1162CrossRef

10.

J. Talonen, N. Pertti, P. Gersom, and H. Hanninen, Effect of Strain Rate on the Strain Induced Martensite γ → α’ Transformation and Mechanical Properties of Austenitic Stainless Steels, Metall. Trans. A, 2005, 36, p 421–432CrossRef

11.

S.S. Hecker, M.G. Stout, K.P. Staudhammer, and J.L. Smith, Effects of Strain State and Strain Rate on Deformation Induced Transformation in 304 Stainless Steel. I. Magnetic Measurements and Mechanical Behavior, Metall, Mater. Trans., 1982, A13, p 619–626CrossRef

12.

A. Kumar and L.K. Singhal, Effect of Strain Rate on Martensitic Transformation During Uniaxial Testing of AISI, 304 Stainless Steel, Metall. Trans. A, 1989, 20, p 2857–2859CrossRef

13.

R. Kishor, L. Sahu, K. Dutta, and A.K. Mondal, Assessment of Dislocation density in Asymmetrically Cyclic Loaded Non-Conventional Stainless Steel using X-ray Diffraction Profile Analysis, Mater. Sci. Eng., A, 2014, 598, p 299–303CrossRef

14.

J.W. Chan, J. Glazer, Z. Mei, P.A. Kramer, and J.W. Morris, Fracture Toughness of 304 Stainless Steel in an 8 Tesla Field, Acta Metall. Mater., 1990, 38, p 479–487CrossRef

15.

V. Shrinivas, S.K. Verma, and LE Murr, Deformation-induced Martensitic Characteristics in 304 and 316 Stainless Steels During Room-Temperature Rolling, Metall. Mater. Trans., 1995, A26(3), p 661–671CrossRef

16.

ASTM standards E112-13, Standard Test Methods For Determining Average Grain Size, vol-03.01.

17.

B.D. Cullity and S.R. Stock, Elements of X-ray Diffraction, Addison-Wesley Publishing Company Inc, Reading, 1956

18.

K. Nohara, Y. Ono, and N. Ohashi, Composition and Grain size Dependence of Strain- induced Martensite Transformation in Metastable Austenitic Stainless Steels, J. Iron steel Inst. Jpn., 1977, 63, p 212–222

19.

H. Roy, A. Ray, K. Barat, C. Hochmuth, S. Sivaprasad, S. Tarafder, U. Glatzel, and K.K. Ray, Structural Variations Ahead of Crack Tip During Monotonic and Cyclic Fracture Tests of AISI, 304LN Stainless Steel, Mater. Sci. Eng., A, 2013, 561, p 88–89CrossRef

20.

L. Sahu, A.K. Mishra, and K. Dutta, Ratcheting Behavior of a Non-Conventional Stainless Steel and Associated Microstructural Variations, J. Mater. Eng. Perform., 2014, 23(11), p 4122–4129CrossRef

Title: Martensitic Transformation During Compressive Deformation of a Non-conventional Stainless Steel and Its Quantitative Assessment
Authors: R. Kreethi
P. Sampark
Goutam Kumar Majhi
Krishna Dutta
Publication date: 30-09-2015
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 11/2015
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-015-1724-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11/2015

Effect of pH Value on the Electrochemical and Stress Corrosion Cracking Behavior of X70 Pipeline Steel in the Dilute Bicarbonate Solutions

Laser Surface Treatment of Hydro and Thermal Power Plant Components and Their Coatings: A Review and Recent Findings

Effect of 0.2 and 0.5% Ti on the microstructure and mechanical properties of 13Cr supermartensitic stainless steel

Effect of Electromagnetic Field on Microstructure and Properties of Bulk AlCrFeNiMo0.2 High-Entropy Alloy

Characterization of GNP-Containing Al2O3 Nanocomposites Fabricated via High Frequency-Induction Heat Sintering Route

Study of Static Recrystallization Behavior of a Nitrogen-Alloyed Ultralow Carbon Austenitic Stainless Steel by Experiment and Simulation

Premium Partners