Skip to main content
Top
Published in: Journal of Materials Science: Materials in Electronics 6/2012

01-06-2012

Study on properties of Sn–9Zn–Ga solder bearing Nd

Authors: Peng Xue, Song-bai Xue, Yi-fu Shen, Hong Zhu, Li–li Gao

Published in: Journal of Materials Science: Materials in Electronics | Issue 6/2012

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The effects of Nd on wettability, microstructure and mechanical properties of Sn–9Zn–Ga–xNd lead-free solder were investigated. The results indicate that adding moderate amount of rare earth Nd, the wettability as well as mechanical properties of Sn–9Zn–0.5Ga solder were evidently improved, and when the content of Nd is at 0.08 wt%, the best wettability and comprehensive properties of soldered joint were obtained. It was also found that the addition of rare earth Nd could refine the microstructure of the solder, but some dark NdSn3 phase appeared when the addition of Nd exceeded 0.15 wt%. Moreover, the IMCs thickness at the solder/Cu interface was reduced with the addition of Nd which gave a favorable influence on the mechanical property of the soldered joints.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference G. Zeng, S.B. Xue, L. Zhang et al., Properties and microstructure of Sn–0.7Cu–0.05Ni solder bearing rare earth element Pr. J. Mater. Sci: Mater. Electron. 22, 1101–1108 (2011)CrossRef G. Zeng, S.B. Xue, L. Zhang et al., Properties and microstructure of Sn–0.7Cu–0.05Ni solder bearing rare earth element Pr. J. Mater. Sci: Mater. Electron. 22, 1101–1108 (2011)CrossRef
2.
go back to reference C.M. Chen, Y.M. Hung, C.P. Lin, W.C. Su, Effect of temperature on microstructural changes of the Sn-9 wt% Zn lead-free solder stripe under current stressing. Mater. Chem. Phys. 115, 367–370 (2009)CrossRef C.M. Chen, Y.M. Hung, C.P. Lin, W.C. Su, Effect of temperature on microstructural changes of the Sn-9 wt% Zn lead-free solder stripe under current stressing. Mater. Chem. Phys. 115, 367–370 (2009)CrossRef
3.
go back to reference J.M. Song, G.F. Lan, T.S. Lui, L.H. Chen, Microstructure and tensile properties of Sn–9Zn–xAg lead-free solder alloys. Scripta Mater. 48, 1047–1051 (2003)CrossRef J.M. Song, G.F. Lan, T.S. Lui, L.H. Chen, Microstructure and tensile properties of Sn–9Zn–xAg lead-free solder alloys. Scripta Mater. 48, 1047–1051 (2003)CrossRef
4.
go back to reference T.C. Hsuan, K.L. Lin, Microstructural evolution of ε–AgZn3 and η–Zn phases in Sn–8.5Zn–0.5Ag–0.01Al–0.1Ga solder during aging treatment. J. Alloys Compd. 409, 350–356 (2009)CrossRef T.C. Hsuan, K.L. Lin, Microstructural evolution of ε–AgZn3 and η–Zn phases in Sn–8.5Zn–0.5Ag–0.01Al–0.1Ga solder during aging treatment. J. Alloys Compd. 409, 350–356 (2009)CrossRef
5.
go back to reference J. Zhao, L. Qi, X.M. Wang et al., Influence of Bi on microstructures evolution and mechanical properties in Sn–Ag–Cu lead-free solder. J. Alloys Compd. 375(1–2), 196–201 (2004)CrossRef J. Zhao, L. Qi, X.M. Wang et al., Influence of Bi on microstructures evolution and mechanical properties in Sn–Ag–Cu lead-free solder. J. Alloys Compd. 375(1–2), 196–201 (2004)CrossRef
6.
go back to reference D.Q. Yu, H.P. Xie, L. Wang, Investigation of interfacial microstructure and wetting property of newly developed Sn–Zn–Cu solders with Cu substrate. J. Alloys Compd. 385(1–2), 119–125 (2004)CrossRef D.Q. Yu, H.P. Xie, L. Wang, Investigation of interfacial microstructure and wetting property of newly developed Sn–Zn–Cu solders with Cu substrate. J. Alloys Compd. 385(1–2), 119–125 (2004)CrossRef
7.
go back to reference Y. Miyazawa, T. Ariga, Influences of aging treatment on microstructure and hardness of Sn–(Ag, Bi, Zn) eutectic solder alloys: special issue on basic science and advanced technology of lead-free electronics packaging. J. Mater. Trans. 42((5)), 776–782 ((2001))CrossRef Y. Miyazawa, T. Ariga, Influences of aging treatment on microstructure and hardness of Sn–(Ag, Bi, Zn) eutectic solder alloys: special issue on basic science and advanced technology of lead-free electronics packaging. J. Mater. Trans. 42((5)), 776–782 ((2001))CrossRef
8.
go back to reference K. Suganuma, K. Niihara, T. Shoutoku, Y. Nakamura, Wetting and interface microstructure between Sn–Zn binary alloys and Cu. J. Mater. Res. 13, 2859 (1998)CrossRef K. Suganuma, K. Niihara, T. Shoutoku, Y. Nakamura, Wetting and interface microstructure between Sn–Zn binary alloys and Cu. J. Mater. Res. 13, 2859 (1998)CrossRef
9.
go back to reference K.L. Lin, T.P. Liu, High temperature oxidation of a Sn–Zn–Al solder. Oxid. Met. 50, 255–267 (1998)CrossRef K.L. Lin, T.P. Liu, High temperature oxidation of a Sn–Zn–Al solder. Oxid. Met. 50, 255–267 (1998)CrossRef
10.
go back to reference H. Wang, Study on the properties and related mechanisms of micro-alloyed Sn–9Zn lead-free solder.[D], Nanjing: Nanjing University of Aeronautics and Astronautics, 2010 H. Wang, Study on the properties and related mechanisms of micro-alloyed Sn–9Zn lead-free solder.[D], Nanjing: Nanjing University of Aeronautics and Astronautics, 2010
11.
go back to reference N.S. Liu, K.L. Lin, The effect of Ga content on the wetting reaction and interfacial morphology formed between Sn–8.55Zn–0.5Ag–0.1Al–xGa solders and Cu. Scripta Mater. 54(2), 219–224 (2006)CrossRef N.S. Liu, K.L. Lin, The effect of Ga content on the wetting reaction and interfacial morphology formed between Sn–8.55Zn–0.5Ag–0.1Al–xGa solders and Cu. Scripta Mater. 54(2), 219–224 (2006)CrossRef
12.
go back to reference W.X. Chen, S.B. Xue, H. Wang, Wetting properties and interfacial microstructures of Sn–Zn–xGa solders on Cu substrate. Mater. Des. 31, 2196–2200 (2010)CrossRef W.X. Chen, S.B. Xue, H. Wang, Wetting properties and interfacial microstructures of Sn–Zn–xGa solders on Cu substrate. Mater. Des. 31, 2196–2200 (2010)CrossRef
13.
go back to reference S.B. Xue, S.L. Yu, X.Y. Wang et al., Effects of rare earth element Ce on solderabilities of micro-powdered Sn–Ag–Cu solder. Trans. Nonferr. Met. Soc. China 15(6), 1285–1289 (2005) S.B. Xue, S.L. Yu, X.Y. Wang et al., Effects of rare earth element Ce on solderabilities of micro-powdered Sn–Ag–Cu solder. Trans. Nonferr. Met. Soc. China 15(6), 1285–1289 (2005)
14.
go back to reference A. Ramirez, H. Mavoori, S. Jin, Bonding nature of rare-earth-containing lead-free solders. Appl. Phys. Lett. 80(3), 398–400 (2002)CrossRef A. Ramirez, H. Mavoori, S. Jin, Bonding nature of rare-earth-containing lead-free solders. Appl. Phys. Lett. 80(3), 398–400 (2002)CrossRef
15.
go back to reference Z.G. Chen, Y.W. Shi, Z.D. Xia, Y.F. Yan, Properties of lead-free solder SnAgCu containing minute amounts of rare earth. J. Electron. Mater. 32(4), 235–243 (2003)CrossRef Z.G. Chen, Y.W. Shi, Z.D. Xia, Y.F. Yan, Properties of lead-free solder SnAgCu containing minute amounts of rare earth. J. Electron. Mater. 32(4), 235–243 (2003)CrossRef
16.
go back to reference L.L. Gao, S.B. Xue, L.A. Zhang, Z.X. Xiao, W. Dai, F. Ji et al., Effect of praseodymium on the microstructure and properties of Sn3.8Ag0.7Cu solder. J. Mater. Sci. Mater. Electron. 21, 910–916 (2010)CrossRef L.L. Gao, S.B. Xue, L.A. Zhang, Z.X. Xiao, W. Dai, F. Ji et al., Effect of praseodymium on the microstructure and properties of Sn3.8Ag0.7Cu solder. J. Mater. Sci. Mater. Electron. 21, 910–916 (2010)CrossRef
17.
go back to reference Y. Shi, J. Tian, H. Hao, Z. Xia, Y. Lei, F. Guo, Effects of small amount addition of rare earth Er on microstructure and property of SnAgCu solder. J. Alloys Compd. 453, 180–184 (2008)CrossRef Y. Shi, J. Tian, H. Hao, Z. Xia, Y. Lei, F. Guo, Effects of small amount addition of rare earth Er on microstructure and property of SnAgCu solder. J. Alloys Compd. 453, 180–184 (2008)CrossRef
18.
go back to reference Council of Japan Industry Standard, J IS Z 3198-2 test methods for lead-free solders—Part 4: methods for solderability test by a wetting balance method and a contact angle method, 2003 Council of Japan Industry Standard, J IS Z 3198-2 test methods for lead-free solders—Part 4: methods for solderability test by a wetting balance method and a contact angle method, 2003
19.
go back to reference J.X. Wang, S.B. Xue, Z.J. Han, S.L. Yu, Y. Chen, Y.P. Shi, H. Wang, Effect of rare earth Ce on microstructures, solderability of Sn–Ag–Cu and Sn–Cu–Ni solders as well as mechanical properties of soldered joints. J. Alloys Compd. 467(1–2), 219–226 (2009)CrossRef J.X. Wang, S.B. Xue, Z.J. Han, S.L. Yu, Y. Chen, Y.P. Shi, H. Wang, Effect of rare earth Ce on microstructures, solderability of Sn–Ag–Cu and Sn–Cu–Ni solders as well as mechanical properties of soldered joints. J. Alloys Compd. 467(1–2), 219–226 (2009)CrossRef
20.
go back to reference Council of Japan Industry Standard, J IS Z 3198-2 test methods for lead-free solders—Part 2: methods for mechanical properties-tensile test, 2003 Council of Japan Industry Standard, J IS Z 3198-2 test methods for lead-free solders—Part 2: methods for mechanical properties-tensile test, 2003
21.
go back to reference B. Li, Y.W. Shi, Y.P. Lei, F. Guo, Z.D. Xia, B. Zong, Effect of rare earth element addition on the microstructure of Sn–Ag–Cu solder joint. J. Electron. Mater. 34, 217 (2005)CrossRef B. Li, Y.W. Shi, Y.P. Lei, F. Guo, Z.D. Xia, B. Zong, Effect of rare earth element addition on the microstructure of Sn–Ag–Cu solder joint. J. Electron. Mater. 34, 217 (2005)CrossRef
22.
go back to reference C.M.L. Wu, Y.W. Wong, Rare-earth additions to lead-free electronic solders. J. Mater. Sci. Mater. Electron. 18, 77 (2007)CrossRef C.M.L. Wu, Y.W. Wong, Rare-earth additions to lead-free electronic solders. J. Mater. Sci. Mater. Electron. 18, 77 (2007)CrossRef
23.
go back to reference H. Hao, J. Tian, Y.W. Shi, Y.P. Lei, Z.D. Xia, Properties of Sn3.8Ag0.7Cu solder alloy with trace rare earth element Y additions. J. Elec. Mater. 36, 766 (2007)CrossRef H. Hao, J. Tian, Y.W. Shi, Y.P. Lei, Z.D. Xia, Properties of Sn3.8Ag0.7Cu solder alloy with trace rare earth element Y additions. J. Elec. Mater. 36, 766 (2007)CrossRef
24.
go back to reference Solderability tests for component leads, terminations, lugs, terminals and wires, IPC/EIA/JEDEC J-STD-002B, 2003 Solderability tests for component leads, terminations, lugs, terminals and wires, IPC/EIA/JEDEC J-STD-002B, 2003
25.
go back to reference Y.H. Hu, S.B. Xue, H. Wang, H. Ye, Effects of rare earth element Nd on the solderability and microstructure of Sn–Zn lead-free solder. J. Mater. Sci.: Mater. Electron. 22(5), 481–487 (2011)CrossRef Y.H. Hu, S.B. Xue, H. Wang, H. Ye, Effects of rare earth element Nd on the solderability and microstructure of Sn–Zn lead-free solder. J. Mater. Sci.: Mater. Electron. 22(5), 481–487 (2011)CrossRef
Metadata
Title
Study on properties of Sn–9Zn–Ga solder bearing Nd
Authors
Peng Xue
Song-bai Xue
Yi-fu Shen
Hong Zhu
Li–li Gao
Publication date
01-06-2012
Publisher
Springer US
Published in
Journal of Materials Science: Materials in Electronics / Issue 6/2012
Print ISSN: 0957-4522
Electronic ISSN: 1573-482X
DOI
https://doi.org/10.1007/s10854-011-0586-4

Other articles of this Issue 6/2012

Journal of Materials Science: Materials in Electronics 6/2012 Go to the issue