Top

Journal of Materials Engineering and Performance

Published in:

29-08-2018

The Effects of Sodium Tungstate on the Characteristics of Microarc Oxidation Coating on Ti6Al4V

Authors: Tong Zhou, Yuandi Ding, Qin Luo, Zhenbo Qin, Qi Zhang, Bin Shen, Wenbin Hu, Lei Liu

Published in: Journal of Materials Engineering and Performance | Issue 10/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Microarc oxidized coatings on Ti6Al4V alloy are produced in a basic Na₂SiO₃-(NaPO₃)₆-NaAlO₂ electrolyte with different concentrations of sodium tungstate. The effects of sodium tungstate on the characteristics of the coating are investigated through current–time response, microstructure, composition, hardness, bonding strength and antifriction measurements. The coating is mainly composed of Al₂TiO₅, TiO₂, Al₂O₃ and amorphous substances regardless of the concentration of sodium tungstate. The sodium tungstate is transformed into trace amounts of WO₃, which significantly promotes the growth of the coatings. The bonding strength and antifriction performance of the coatings are enhanced with the concentration of sodium tungstate less than 4 g/L, whereas excessive sodium tungstate results in a coarse outer layer with more microdefects, which deteriorates the wear resistance of the coating. Based on the results of scratch and wear test with energy-dispersive x-ray spectroscopy of the worn surface and debris, the optimal concentration of sodium tungstate doped into the electrolyte is identified, and this concentration yields superior tribological property. Excellent wear resistance is achieved by combining a high bonding strength and hardness with a less defective outer layer.

previous article Microstructural Evolution and Mechanical Behavior of Lead-Free Silicon Brass Manufactured by Low-Pressure Die Casting

next article 3D Gel-Printing of TiC-Reinforced 316L Stainless Steel: Influence of the Printing Parameters

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

A. Gebert, D. Eigel, P.F. Gostin, V. Hoffmann, M. Uhlemann, A. Helth, S. Pilz, R. Schmidt, M. Calin, M. Göttlicher, M. Rohnke, and J. Janek, Oxidation Treatments of Beta-Type Ti-40Nb for Biomedical Use, Surf. Coat. Technol., 2016, 302, p 88–99CrossRef

M. Kastenhuber, B. Rashkova, H. Clemens, and S. Mayer, Effect of Microstructural Instability on the Creep Resistance of an Advanced Intermetallic γ-TiAl Based Alloy, Intermetallics, 2017, 80, p 1–9CrossRef

M.S. Selim, S.A. El-Safty, M.A. El-Sockary, A.I. Hashem, O.M.A. Elenien, A.M. El-Saeed, and N.A. Fatthallah, Smart Photo-Induced Silicone/TiO₂ Nanocomposites with Dominant [110] Exposed Surfaces for Self-Cleaning Foul-Release Coatings of Ship Hulls, Mater. Des., 2016, 101, p 218–225CrossRef

S. Hariprasad, M. Ashfaq, T. Arunnellaiappan, M. Harilal, and N. Rameshbabu, Role of Electrolyte Additives on In-Vitro Corrosion Behavior of DC Plasma Electrolytic Oxidization Coatings Formed on Cp-Ti, Surf. Coat. Technol., 2016, 292, p 20–29CrossRef

C.J. Hu and P.H. Chiu, Wear and Corrosion Resistance of Pure Titanium Subjected to Aluminization and Coated with a Microarc Oxidation Ceramic Coating, Int. J. Electrochem. Sci., 2015, 10, p 4290–4302

A.F. Yetim, Investigation of Wear Behavior of Titanium Oxide Films, Produced by Anodic Oxidation, on Commercially Pure Titanium in Vacuum Conditions, Surf. Coat. Technol., 2010, 205, p 1757–1763CrossRef

T. Dikici and M. Toparli, Microstructure and Mechanical Properties of Nanostructured and Microstructured TiO₂ Films, Mater. Sci. Eng., A, 2016, 661, p 19–24CrossRef

H.X. Liu, Q. Xu, X.W. Zhang, C.Q. Wang, and B.Y. Tang, Wear and Corrosion Behaviors of Ti6Al4V Alloy Biomedical Materials by Silver Plasma Immersion Ion Implantation Process, Thin Solid Films, 2012, 521, p 89–93CrossRef

C.W. Chan, S. Lee, G. Smith, G. Sarri, C.H. Ng, A. Sharba, and H.C. Man, Enhancement of Wear and Corrosion Resistance of Beta Titanium Alloy by Laser Gas Alloying with Nitrogen, Appl. Surf. Sci., 2016, 367, p 80–90CrossRef

10.

V.S. Viteri, G. Barandika, R. Bayón, X. Fernández, I. Ciarsolo, A. Igartua, R.P. Tanoira, J.E. Moreno, and C.P. Peremarch, Development of Ti–C–N Coatings with Improved Tribological Behavior and Antibacterial Properties, J. Mech. Behav. Biomed. Mater., 2016, 55, p 75–86CrossRef

11.

E. Urbańczyk, A. Krząkała, A. Kazek-Kęsik, J. Michalska, A. Stolarczyk, G. Dercz, and W. Simka, Electrochemical Modification of Ti–13Nb–13Zr Alloy Surface in Phosphate Based Solutions, Surf. Coat. Technol., 2016, 291, p 79–88CrossRef

12.

A. Gao, R.Q. Hang, and P.K. Chu, Recent Advances in Anti-Infection Surfaces Fabricated on Biomedical Implants by Plasma-Based Technology, Surf. Coat. Technol., 2017, 312, p 2–6CrossRef

13.

O. Çomaklı, M. Yazıcı, T. Yetim, A.F. Yetim, and A. Çelik, The Effect of Calcination Temperatures on Structural and Electrochemical Properties of TiO₂ Film Deposited on Commercial Pure Titanium, Surf. Coat. Technol., 2016, 285, p 298–303CrossRef

14.

L.T. Duarte, S.R. Biaggio, R.C. Rocha-Filho, and N. Bocchi, Surface Characterization of Oxides Grown on the Ti–13Nb–13Zr Alloy and Their Corrosion Protection, Corros. Sci., 2013, 72, p 35–40CrossRef

15.

J.H. Lee, J.I. Youn, Y.J. Kim, I.K. Kim, K.W. Jang, and H.J. Oh, Photocatalytic Characteristics of Boron and Nitrogen Doped Titania Film Synthesized by Micro-Arc Oxidation, Ceram. Int., 2015, 41, p 11899–11907CrossRef

16.

S.X. Wang, Q. Zhao, D.X. Liu, and N. Du, Microstructure and Elevated Temperature Tribological Behavior of TiO₂/Al₂O₃ Composite Ceramic Coating Formed by Microarc Oxidation of Ti6Al4V Alloy, Surf. Coat. Technol., 2015, 272, p 343–349CrossRef

17.

K. Yousefipour, A. Akbari, and M.R. Bayati, The Effect of EEMAO Processing on Surface Mechanical Properties of the TiO₂–ZrO₂ Nanostructured Composite Coatings, Ceram. Int., 2013, 39, p 7809–7815CrossRef

18.

H.R. Masiha, H.R. Bagheri, M. Gheytani, M. Aliofkhazraei, A. Sabour Rouhaghdam, and T. Shahrabi, Effect of Surface Nanostructuring of Aluminum Alloy on Post Plasma Electrolytic Oxidation, Appl. Surf. Sci., 2014, 317, p 962–969CrossRef

19.

F.C. Chang, C.J. Wang, J.W. Lee, and B.S. Lou, Microstructure and Mechanical Properties Evaluation of Molybdenum Disulfide-Titania Nanocomposite Coatings Grown by Plasma Electrolytic Oxidation, Surf. Coat. Technol., 2016, 303, p 68–77CrossRef

20.

B. Yin, Z.J. Peng, J. Liang, K.J. Jin, S.Y. Zhu, J. Yang, and Z.H. Qiao, Tribological Behavior and Mechanism of Self-Lubricating Wear-Resistant Composite Coatings Fabricated by One-Step Plasma Electrolytic Oxidation, Tribol. Int., 2016, 97, p 97–107CrossRef

21.

N. Ao, D.X. Liu, S.X. Wang, Q. Zhao, X.H. Zhang, and M.M. Zhang, Microstructure and Tribological Behavior of a TiO₂/hBN Composite Ceramic Coating Formed Via Micro-Arc Oxidation of Ti–6Al–4 V Alloy, J. Mater. Sci. Technol., 2016, 32, p 1071–1076CrossRef

22.

J.H. Ouyang, Y.H. Wang, Z.G. Liu, Y.M. Wang, and Y.J. Wang, Preparation and High Temperature Tribological Properties of Microarc Oxidation Ceramic Coatings Formed on Ti2AlNb Alloy, Wear, 2015, 330, p 239–249CrossRef

23.

M.Q. Tang, W.P. Li, H.C. Liu, and L.Q. Zhu, Influence of K₂TiF₆ in Electrolyte on Characteristics of the Microarc Oxidation Coating on Aluminum Alloy, Curr. Appl. Phys., 2012, 12, p 1259–1265CrossRef

24.

Y.M. Wang, T.Q. Lei, L.X. Guo, and B.L. Jiang, Fretting Wear Behaviour of Microarc Oxidation Coatings Formed on Titanium Alloy Against Steel in Unlubrication and Oil Lubrication, Appl. Surf. Sci., 2006, 252, p 8113–8120CrossRef

25.

M. Babaei, C. Dehghanian, and M. Babaei, Electrochemical Assessment of Characteristics and Corrosion Behavior of Zr-Containing Coatings Formed on Titanium by Plasma Electrolytic Oxidation, Surf. Coat. Technol., 2015, 279, p 79–91CrossRef

26.

D. Quintero, M.A. Gomez, J.G. Castano, E. Tsuji, Y. Aoki, F. Echeverria, and H. Habazaki, Anodic Films Obtained on Ti6Al4V in Aluminate Solutions by Spark Anodizing: Effect of OH⁻ and WO-2 4 Additions on the Tribological Properties, Surf. Coat. Technol., 2017, 310, p 180–189CrossRef

27.

M.R. Bayati, F. Golestani-Fard, A.Z. Moshfegh, and R. Molaei, A Photocatalytic Approach in Micro Arc Oxidation of WO₃–TiO₂ Nano Porous Semiconductors Under Pulse Current, Mater. Chem. Phys., 2011, 128, p 427–432CrossRef

28.

M.R. Bayati, A.Z. Moshfegh, F. Golestani-Fard, and R. Molaei (WO₃)_x–(TiO₂)_1−x Nano-Structured Porous Catalysts Grown by Micro-Arc Oxidation Method: Characterization and Formation Mechanism, Mater. Chem. Phys., 2010, 124, p 203–207CrossRef

29.

J. He, Q. Luo, Q.Z. Cai, X.W. Li, and D.Q. Zhang, Microstructure and Photocatalytic Properties of WO₃/TiO₂ Composite Films by Plasma Electrolytic Oxidation, Mater. Chem. Phys., 2011, 129, p 242–248CrossRef

30.

A. Banerji, S. Bhowmick, and A.T. Alpas, High Temperature Tribological Behavior of W Containing Diamond-Like Carbon (DLC) Coating Against Titanium Alloys, Surf. Coat. Technol., 2014, 241, p 93–104CrossRef

31.

O.D. Greenwood, S.C. Moulzolf, P.J. Blau, and R.J. Lad, The Influence of Microstructure on Tribological Properties of WO₃ Thin Films, Wear, 1999, 232, p 84–90CrossRef

32.

J. Raudoniene, A. Laurikenas, M.M. Kaba, G. Sahin, A.U. Morkan, D. Brazinskiene, S. Asadauskas, R. Seidu, A. Kareiva, and E. Garskaite, Textured WO3 and WO3: Mo Films Deposited from Chemical Solution on Stainless Steel, Thin Solid Films, 2018, 653, p 179–187CrossRef

33.

C.C. Tseng, J.L. Lee, T.H. Kuo, S.N. Kuo, and K.H. Tseng, The Influence of Sodium Tungstate Concentration and Anodizing Conditions on Microarc Oxidation (MAO) Coatings for Aluminum Alloy, Surf. Coat. Technol., 2012, 206, p 3437–3443CrossRef

34.

Q.P. Tran, Y.C. Kuo, J.K. Sun, J.L. He, and T.S. Chin, High Quality Oxide-Layers on Al-Alloy by Micro-Arc Oxidation Using Hybrid Voltages, Surf. Coat. Technol., 2016, 303, p 61–67CrossRef

35.

F.H. Chung, Quantitative Interpretation of X-ray Diffraction Patterns of Mixtures. II. Adiabatic Principle of X-ray Diffraction Analysis of Mixtures, J. Appl. Crystallogr., 1974, 7, p 526–531CrossRef

36.

L. Chen, Y. Qu, X. Yang, B. Liao, W. Xue, and W. Cheng, Characterization and First-Principles Calculations of WO₃/TiO₂ Composite Films on Titanium Prepared by Microarc Oxidation, Mater. Chem. Phys., 2017, 201, p 311–322CrossRef

37.

J.M. Albella, I. Montero, and J.M. Martinez-Duart, Electron injection and Avalanche During the Anodic Oxidation of Tantalum, J. Electrochem. Soc., 1984, 131, p 1101–1104CrossRef

Title: The Effects of Sodium Tungstate on the Characteristics of Microarc Oxidation Coating on Ti6Al4V
Authors: Tong Zhou
Yuandi Ding
Qin Luo
Zhenbo Qin
Qi Zhang
Bin Shen
Wenbin Hu
Lei Liu
Publication date: 29-08-2018
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 10/2018
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-018-3613-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 10/2018

Phase-Field Modeling of Nugget Zone for a AZ31-Mg-Alloy Friction Stir Weld

The Application of Centrifugal Atomization Method for Preparation of Rapidly Solidified Nd-Fe-B Flakes Used for Production of Permanent Magnets

Thermal Treatment, Sliding Wear and Saline Corrosion of Al In Situ Reinforced with Mg2Si and Ex Situ Reinforced with TiC Particles

Tribological Behavior of Pulsed Electrodeposited Ni-W/SiC Nanocomposites

GUEST EDITORIAL

Electrodeposition and Properties of Composites Consisting of Carbon Nanotubes and Copper

Premium Partners