Top

Polymer Science, Series D

Published in:

01-12-2022

The Influence of Technological Conditions for Forming Adhesive Primer on Coating Properties As Well As the Strength of Adhesive Joints Made with the Use of Adhesive Primer

Authors: V. A. Kuznetsova, A. P. Petrova, G. G. Shapovalov, V. V. Emelyanov

Published in: Polymer Science, Series D | Issue 4/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

An anticorrosion primer based on an epoxy oligomer modified with acrylonitrile butadiene carboxylate rubber cured with an organosilicon amine (γ-aminopropyltriethoxysilane) was used as an object of research. The influence of the formation mode (with the use of convection and thermoradiation drying) on the properties of an adhesive protective coating based on an epoxy–rubber primer has been studied. The optimal conditions for the formation of a primer coating that ensure its maximum adhesive strength are determined. The strength of adhesive joints in shear and uniform separation was determined using Elasil 137-175M adhesive–sealant without a primer coating, as well as with a coating, in the initial state, and after thermal aging, in addition to after tests in water and a tropical chamber.

previous article Urea–Melamine Formaldehyde Resin for the Manufacture of Water-Resistant Plywood

next article Flame Retardants for Slow-Burning and Fire-Resistant Polymer-Composite Materials

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

E. N. Kablov, “The role of chemistry in the creation of new generation materials for complex technical systems,” in Proceedings of the 20 ^th Mendeleev Congress on General and Applied Chemistry (Ural Branch, Russian Academy of Sciences, Yekaterinburg, 2016), pp. 25–26.

E. N. Kablov, “Aviation materials science: results and prospects,” Vest. Ross. Akad. Nauk 72, 3–12 (2002).

E. N. Kablov, “Innovative developments of FSUE “VIAM” for the implementation of the “Strategic directions for the development of materials and technologies for their processing for the period up to 2030”,” Aviatsionnye Materialy i Tekhnologii, No. 1, 3–33 (2015). https://doi.org/10.18577/2071-9140-2015-0-1-3-33CrossRef

S. A. Karimova, T. G. Pavlovskaya, and A. P. Petrova, “Surface preparation of aluminum alloys using anodic oxidation,” Klei. Germetiki. Tekhnologii, No. 1, 20–23 (2015).

V. G. Zheleznyak, “Modern paints and varnishes for use in aviation products,” Trudy VIAM No. 5, 07(2019). https://doi.org/10.18577/2307-6046-2019-0-5-62-67

E. K. Kondrashova, V. A. Kuznetsova, L. V. Semenova, T. A. Lebedeva, and N. E. Malova, “Development of aviation paints and varnishes,” Vse Materialy. Entsiklopedicheskii Spravochnik, No. 5, 49–54 (2012).

E. N. Kablov, “Corrosion or life,” Nauka i Zhizn’, No. 11, 16–21 (2012).

V. P. Zhilikov, S. A. Karimova, S. S. Leshko, and D. V. Chesnokov, “Investigation of the corrosion dynamics of aluminum alloys during testing in a salt fog chamber (SFC),” Aviatsionnye Materialy i Tekhnologii, No. 4, 18–22 (2012).

A. P. Petrova and L. I. Anikhovskaya, “The influence of the EP-0234 adhesive primer on the properties of adhesive joints made using VK-50 phenolic–rubber adhesive,” Polym. Sci. Ser. D 9, 374–376 (2016).CrossRef

10.

A. P. Petrova and N. F. Lukina, “Influence of adhesive primer EP-0234 on the performance of epoxy film adhesive,” Klei. Germetiki. Tekhnologii, No. 69, 17–19 (2015).

11.

A. V. Pocius, Adhesion and Adhesive Technologies: an Introduction (Hanser Verlag, 2002; Professiya, St. Petersburg, 2007).

12.

A. P. Petrova and N. F. Lukina, “Application of adhesion coats and systems of surface modification during gluing,” Polym. Sci. Ser. D 7, 177–180 (2014).CrossRef

13.

A. A. Berlin and V. E. Basin, Fundamentals of Polymer Adhesion (Khimiya, Moscow, 1969) [in Russian].

14.

V. A. Kuznetsova and G. V. Kuznetsov, “Development trends in the field of fuel-resistant paint coatings for the protection of aircraft fuel caisson tanks (review),” Trudy VIAM, No. 11, 08 (2014). https://doi.org/10.18577/2307-6046-2014-0-11-8-8

15.

V. A. Kuznetsova, A. A. Silaeva, G. G. Shapovalov, and S. A. Marchenko, “Investigation of the influence of the plasticization mode of carboxylate butadiene-nitrile rubber and its content in the polymer matrix on the properties of a fuel-resistant coating,” Trudy VIAM, No. 6, 07 (2019). https://doi.org/10.18577/2307-6046-2019-0-6-65-74

16.

V. A. Kuznetsova, V. G. Zheleznyak, and A. A. Silaeva, “Influence of mechanical characteristics of priming coatings on the stability of systems of erosion-resistant dispersion-reinforced coatings to cyclic mechanical loads,” Trudy VIAM, No. 6, 07 (2018). https://doi.org/10.18577/2307-6046-2018-0-6-59-67

17.

A. P. Petrova, V. A. Kuznetsova, N. F. Lukina, and A. Yu. Isaev, “Influence of an anticorrosive primer on the properties of adhesive joints made with the use of an organosilicon adhesive-sealant,” Trudy VIAM, No. 10, 02 (2020). https://doi.org/10.18577/2307-6046-2020-0-10-13-20

18.

L. V. Semenova and N. I. Nefedov, “Application of modified epoxy primers in paint systems,” Aviatsionnye Materialy i Tekhnologii, No. 3, 38–44 (2014). https://doi.org/10.18577/2071-9140-2014-0-3-38-44CrossRef

19.

Z. A. Kochnova, E. S. Zhavoronok, and A. V. Kotova, “Features of obtaining epoxy-rubber compositions based on liquid nitrile rubbers and epoxy oligomers,” Lakokrasochnye Materialy i Ikh Primenenie, No. 11, 27—28 (1998).

20.

M. F. Sorokina, Z. A. Kochnova, A. A. Zakharova, and N. A. Golova, “Curing of epoxy oligomers with aminoalkoxysilanes,” Lakokrasochnye Materialy i Ikh Primenenie, No. 5, 24–28 (1986).

21.

A. E. Chalykh, Z. A. Kochnova, and E. S. Zhavoronok, “Compatibility and diffusion in epoxy oligomer-liquid carboxylate rubber systems,” Vysokomolekulyarnye Soedineniya Ser. A 43, 1–9 (2001).

22.

L. Ya. Moshinskii, Epoxy Resins and Hardeners (Structure, Properties, Chemistry and Topology of Curing) (Arkadiya Press, Tel Aviv, 1995) [in Russian].

23.

A. E. Lundin, A. M. Ostapkovich, and E. Yu. Yushkova, “Epoxy curing kinetics with amines,” Izvestiya VUZov. Ser.: Khimiya i Khimicheskaya Tekhnologiya, No. 1, 73—75 (2005).

24.

V. E. Katnov and S. N. Stepin, “Investigation of the influence of the hardener on the chemical resistance and protective properties of epoxy coatings,” in Proceedings of the Scientific Session of Kazan State Technical University (Kazan Gos. Tekh. Univ., Kazan, 2008), pp. 34–35.

25.

A. D. Eselev and V. A. Bobylev, “Epoxy resins: yesterday, today, tomorrow,” Lakokrasochnaya Prom-st, No. 9, 15–17 (2009).

26.

R. A. Shlyakhter and F. B. Novoselok, Synthetic Rubber, Ed. by I. V. Garmonov (Khimiya, Moscow, 1978) [in Russian].

Title: The Influence of Technological Conditions for Forming Adhesive Primer on Coating Properties As Well As the Strength of Adhesive Joints Made with the Use of Adhesive Primer
Authors: V. A. Kuznetsova
A. P. Petrova
G. G. Shapovalov
V. V. Emelyanov
Publication date: 01-12-2022
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 4/2022
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421222040293

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2022

Membrane Purification of Depleted Emulsions by Polymer Membranes (Brief Literature Review)

Urea–Melamine Formaldehyde Resin for the Manufacture of Water-Resistant Plywood

Analyzing the Destruction of a Carbon-Fiber-Reinforced Polymer during the Pushout of a Multifilamentary Cylinder

Salts of Tartaric Acid As Modifiers of Aminoformaldehyde Resins

The Structure and Properties of Bioresorbable Polylactide-Based Materials for Regenerative Medicine

Features of Curing Plastics Based on Thermosetting Binders

Premium Partners