Skip to main content
Top
Published in: Metallurgical and Materials Transactions B 6/2010

01-12-2010

Thermodynamics of Arsenic in FeOx-CaO-SiO2 Slags

Authors: Chunlin Chen, Sharif Jahanshahi

Published in: Metallurgical and Materials Transactions B | Issue 6/2010

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The distribution of arsenic between calcium ferrite slag and liquid silver (wt pct As in slag/ wt pct As in liquid silver) with 22 wt pct CaO and between iron silicate slag with 24 wt pct SiO2 and calcium iron silicate slags was measured at 1573 K (1300 °C) under a controlled CO-CO2-Ar atmosphere. For the calcium ferrite slags, a broad range of oxygen partial pressure (10–11 to 0.21 atm) was covered, whereas for the silicate slags, the oxygen partial pressure was varied from 10–9 to 3.1 × 10–7 atm. The measured relations between the distribution ratio of As and the oxygen partial pressure indicates that the oxidation state of arsenic in these slags is predominantly As3+ or AsO1.5. The measured distribution ratio of arsenic between the calcium ferrite slag and the liquid silver was about an order of magnitude higher than that of the iron silicate slag. In addition, an increasing concentration of SiO2 in the calcium-ferrite-based melts resulted in decreases in the distribution of arsenic into the slag. Through the use of measured equilibrium data on the arsenic content of the metal and slag in conjunction with the composition dependent on the activity of arsenic in the metal, the activity of AsO1.5 in the slags was deduced. These activity data on AsO1.5 show a negative deviation from the ideal behavior in these slags.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference M. Nagamori, P.J. Mackey, and P. Tarassoff: Metall. Trans. B, 1975, vol. 6B, pp. 295-01.CrossRefADS M. Nagamori, P.J. Mackey, and P. Tarassoff: Metall. Trans. B, 1975, vol. 6B, pp. 295-01.CrossRefADS
2.
go back to reference M. Kashima, M. Eguchi, and A. Yazawa: Trans. Jpn. Inst. Met., 1978, vol. 19, pp. 152-58. M. Kashima, M. Eguchi, and A. Yazawa: Trans. Jpn. Inst. Met., 1978, vol. 19, pp. 152-58.
3.
go back to reference M. Kashima, Y. Nishikawa, M. Eguchi, and A. Yazawa: J. Jpn. Inst. Met., 1980, vol. 96, pp. 907-11. M. Kashima, Y. Nishikawa, M. Eguchi, and A. Yazawa: J. Jpn. Inst. Met., 1980, vol. 96, pp. 907-11.
4.
go back to reference D.C. Lynch and K.W. Schwartze: Can. Metall. Q., 1981, vol. 20, pp. 269-78. D.C. Lynch and K.W. Schwartze: Can. Metall. Q., 1981, vol. 20, pp. 269-78.
5.
go back to reference D.M. Dabbs and D.C. Lynch: Advances in Sulfide Smelting, vol. 1, The Metallurgical Society of AIME, Warrendale, PA, 1983, pp. 143-69. D.M. Dabbs and D.C. Lynch: Advances in Sulfide Smelting, vol. 1, The Metallurgical Society of AIME, Warrendale, PA, 1983, pp. 143-69.
6.
7.
go back to reference Y. Takeda, S. Ishiwata, and A. Yazawa: Trans. Jpn. Inst. Met., 1983, vol. 24, no. 7, pp. 518-28. Y. Takeda, S. Ishiwata, and A. Yazawa: Trans. Jpn. Inst. Met., 1983, vol. 24, no. 7, pp. 518-28.
8.
go back to reference H. Eerola, K. Jylha, and P. Taskinen: Trans. Inst. Min. Metall. C, 1984, vol. 93, pp. C193-99. H. Eerola, K. Jylha, and P. Taskinen: Trans. Inst. Min. Metall. C, 1984, vol. 93, pp. C193-99.
9.
go back to reference H.G. Kim and H.Y. Sohn: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 583-90.CrossRef H.G. Kim and H.Y. Sohn: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 583-90.CrossRef
10.
go back to reference M. Somerville: Masters Thesis, University of Melbourne, Melbourne, Australia, 2000. M. Somerville: Masters Thesis, University of Melbourne, Melbourne, Australia, 2000.
11.
go back to reference M. Hino and T. Azakami: Metall. Rev. MMIJ, 1986, vol. 3, no. 1, pp. 61-78. M. Hino and T. Azakami: Metall. Rev. MMIJ, 1986, vol. 3, no. 1, pp. 61-78.
12.
go back to reference O. Knacke, O. Kubachewski, and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Springer-Verlag, Berlin, Germany, 1991. O. Knacke, O. Kubachewski, and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Springer-Verlag, Berlin, Germany, 1991.
13.
go back to reference M.D. Johnston, S. Jahansshahi, and F.J. Lincoln: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 433-42.CrossRefADS M.D. Johnston, S. Jahansshahi, and F.J. Lincoln: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 433-42.CrossRefADS
14.
go back to reference A. Yazawa and Y. Takeda: Trans. Jpn. Inst. Met., 1982, vol. 23, no. 6, pp. 328-33. A. Yazawa and Y. Takeda: Trans. Jpn. Inst. Met., 1982, vol. 23, no. 6, pp. 328-33.
15.
go back to reference Australian Standards 1038, Part 14.1: Analysis of Coal Ash, Coke Ash and Mineral Matter, 1981. Australian Standards 1038, Part 14.1: Analysis of Coal Ash, Coke Ash and Mineral Matter, 1981.
16.
go back to reference R.S. Young: Chemical Analysis in Extractive Metallurgy, Charles Griffin and Company Limited, London, UK, 1971, pp. 172-87. R.S. Young: Chemical Analysis in Extractive Metallurgy, Charles Griffin and Company Limited, London, UK, 1971, pp. 172-87.
17.
go back to reference Y. Takeda, S. Nakazawa, and A. Yazawa: Can. Metall. Q., 1980, vol. 19, pp. 297-05. Y. Takeda, S. Nakazawa, and A. Yazawa: Can. Metall. Q., 1980, vol. 19, pp. 297-05.
18.
go back to reference A. Muan: Trans. AIME, 1955, vol. 203, pp. 965-77. A. Muan: Trans. AIME, 1955, vol. 203, pp. 965-77.
19.
go back to reference H.M. Henao, F. Kongoli, and K. Itagaki: Mater. Trans. JIM, 2005, vol. 46, no. 4, pp. 812-19.CrossRef H.M. Henao, F. Kongoli, and K. Itagaki: Mater. Trans. JIM, 2005, vol. 46, no. 4, pp. 812-19.CrossRef
20.
go back to reference E.J. Michal and R. Schuhmann: J. Met., 1952, vol. 4, pp. 723-28. E.J. Michal and R. Schuhmann: J. Met., 1952, vol. 4, pp. 723-28.
21.
go back to reference L. Yang: Ph.D. Dissertation, University of Newcastle, Sydney, Australia, 1994. L. Yang: Ph.D. Dissertation, University of Newcastle, Sydney, Australia, 1994.
22.
go back to reference S. Sun and S. Jahanshahi: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 937-44.CrossRef S. Sun and S. Jahanshahi: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 937-44.CrossRef
23.
go back to reference B. Pei: Scand. J. Metall., 1993, vol. 22, pp. 24-29. B. Pei: Scand. J. Metall., 1993, vol. 22, pp. 24-29.
24.
25.
go back to reference I. Ansara and B. Sundman: Computer Handling and Dissemination of Data, ed., P.S. Glaser, Elsevier Science Ltd., Atlanta, GA, 1986, pp. 154-58. I. Ansara and B. Sundman: Computer Handling and Dissemination of Data, ed., P.S. Glaser, Elsevier Science Ltd., Atlanta, GA, 1986, pp. 154-58.
26.
go back to reference G. Roghani, Y. Takeda, and K. Itagaki: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 705-12.CrossRefADS G. Roghani, Y. Takeda, and K. Itagaki: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 705-12.CrossRefADS
27.
go back to reference G. Roghani, J.C. Font, M. Hino, and K. Itagaki: Mater. Trans. JIM, 1996, vol. 37, pp. 1574-79. G. Roghani, J.C. Font, M. Hino, and K. Itagaki: Mater. Trans. JIM, 1996, vol. 37, pp. 1574-79.
Metadata
Title
Thermodynamics of Arsenic in FeOx-CaO-SiO2 Slags
Authors
Chunlin Chen
Sharif Jahanshahi
Publication date
01-12-2010
Publisher
Springer US
Published in
Metallurgical and Materials Transactions B / Issue 6/2010
Print ISSN: 1073-5615
Electronic ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-010-9430-0

Other articles of this Issue 6/2010

Metallurgical and Materials Transactions B 6/2010 Go to the issue

Premium Partners