Skip to main content
Erschienen in: Metallurgical and Materials Transactions B 6/2010

01.12.2010

Thermodynamics of Arsenic in FeOx-CaO-SiO2 Slags

verfasst von: Chunlin Chen, Sharif Jahanshahi

Erschienen in: Metallurgical and Materials Transactions B | Ausgabe 6/2010

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The distribution of arsenic between calcium ferrite slag and liquid silver (wt pct As in slag/ wt pct As in liquid silver) with 22 wt pct CaO and between iron silicate slag with 24 wt pct SiO2 and calcium iron silicate slags was measured at 1573 K (1300 °C) under a controlled CO-CO2-Ar atmosphere. For the calcium ferrite slags, a broad range of oxygen partial pressure (10–11 to 0.21 atm) was covered, whereas for the silicate slags, the oxygen partial pressure was varied from 10–9 to 3.1 × 10–7 atm. The measured relations between the distribution ratio of As and the oxygen partial pressure indicates that the oxidation state of arsenic in these slags is predominantly As3+ or AsO1.5. The measured distribution ratio of arsenic between the calcium ferrite slag and the liquid silver was about an order of magnitude higher than that of the iron silicate slag. In addition, an increasing concentration of SiO2 in the calcium-ferrite-based melts resulted in decreases in the distribution of arsenic into the slag. Through the use of measured equilibrium data on the arsenic content of the metal and slag in conjunction with the composition dependent on the activity of arsenic in the metal, the activity of AsO1.5 in the slags was deduced. These activity data on AsO1.5 show a negative deviation from the ideal behavior in these slags.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat M. Nagamori, P.J. Mackey, and P. Tarassoff: Metall. Trans. B, 1975, vol. 6B, pp. 295-01.CrossRefADS M. Nagamori, P.J. Mackey, and P. Tarassoff: Metall. Trans. B, 1975, vol. 6B, pp. 295-01.CrossRefADS
2.
Zurück zum Zitat M. Kashima, M. Eguchi, and A. Yazawa: Trans. Jpn. Inst. Met., 1978, vol. 19, pp. 152-58. M. Kashima, M. Eguchi, and A. Yazawa: Trans. Jpn. Inst. Met., 1978, vol. 19, pp. 152-58.
3.
Zurück zum Zitat M. Kashima, Y. Nishikawa, M. Eguchi, and A. Yazawa: J. Jpn. Inst. Met., 1980, vol. 96, pp. 907-11. M. Kashima, Y. Nishikawa, M. Eguchi, and A. Yazawa: J. Jpn. Inst. Met., 1980, vol. 96, pp. 907-11.
4.
Zurück zum Zitat D.C. Lynch and K.W. Schwartze: Can. Metall. Q., 1981, vol. 20, pp. 269-78. D.C. Lynch and K.W. Schwartze: Can. Metall. Q., 1981, vol. 20, pp. 269-78.
5.
Zurück zum Zitat D.M. Dabbs and D.C. Lynch: Advances in Sulfide Smelting, vol. 1, The Metallurgical Society of AIME, Warrendale, PA, 1983, pp. 143-69. D.M. Dabbs and D.C. Lynch: Advances in Sulfide Smelting, vol. 1, The Metallurgical Society of AIME, Warrendale, PA, 1983, pp. 143-69.
6.
7.
Zurück zum Zitat Y. Takeda, S. Ishiwata, and A. Yazawa: Trans. Jpn. Inst. Met., 1983, vol. 24, no. 7, pp. 518-28. Y. Takeda, S. Ishiwata, and A. Yazawa: Trans. Jpn. Inst. Met., 1983, vol. 24, no. 7, pp. 518-28.
8.
Zurück zum Zitat H. Eerola, K. Jylha, and P. Taskinen: Trans. Inst. Min. Metall. C, 1984, vol. 93, pp. C193-99. H. Eerola, K. Jylha, and P. Taskinen: Trans. Inst. Min. Metall. C, 1984, vol. 93, pp. C193-99.
9.
Zurück zum Zitat H.G. Kim and H.Y. Sohn: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 583-90.CrossRef H.G. Kim and H.Y. Sohn: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 583-90.CrossRef
10.
Zurück zum Zitat M. Somerville: Masters Thesis, University of Melbourne, Melbourne, Australia, 2000. M. Somerville: Masters Thesis, University of Melbourne, Melbourne, Australia, 2000.
11.
Zurück zum Zitat M. Hino and T. Azakami: Metall. Rev. MMIJ, 1986, vol. 3, no. 1, pp. 61-78. M. Hino and T. Azakami: Metall. Rev. MMIJ, 1986, vol. 3, no. 1, pp. 61-78.
12.
Zurück zum Zitat O. Knacke, O. Kubachewski, and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Springer-Verlag, Berlin, Germany, 1991. O. Knacke, O. Kubachewski, and K. Hesselmann: Thermochemical Properties of Inorganic Substances, Springer-Verlag, Berlin, Germany, 1991.
13.
Zurück zum Zitat M.D. Johnston, S. Jahansshahi, and F.J. Lincoln: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 433-42.CrossRefADS M.D. Johnston, S. Jahansshahi, and F.J. Lincoln: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 433-42.CrossRefADS
14.
Zurück zum Zitat A. Yazawa and Y. Takeda: Trans. Jpn. Inst. Met., 1982, vol. 23, no. 6, pp. 328-33. A. Yazawa and Y. Takeda: Trans. Jpn. Inst. Met., 1982, vol. 23, no. 6, pp. 328-33.
15.
Zurück zum Zitat Australian Standards 1038, Part 14.1: Analysis of Coal Ash, Coke Ash and Mineral Matter, 1981. Australian Standards 1038, Part 14.1: Analysis of Coal Ash, Coke Ash and Mineral Matter, 1981.
16.
Zurück zum Zitat R.S. Young: Chemical Analysis in Extractive Metallurgy, Charles Griffin and Company Limited, London, UK, 1971, pp. 172-87. R.S. Young: Chemical Analysis in Extractive Metallurgy, Charles Griffin and Company Limited, London, UK, 1971, pp. 172-87.
17.
Zurück zum Zitat Y. Takeda, S. Nakazawa, and A. Yazawa: Can. Metall. Q., 1980, vol. 19, pp. 297-05. Y. Takeda, S. Nakazawa, and A. Yazawa: Can. Metall. Q., 1980, vol. 19, pp. 297-05.
18.
Zurück zum Zitat A. Muan: Trans. AIME, 1955, vol. 203, pp. 965-77. A. Muan: Trans. AIME, 1955, vol. 203, pp. 965-77.
19.
Zurück zum Zitat H.M. Henao, F. Kongoli, and K. Itagaki: Mater. Trans. JIM, 2005, vol. 46, no. 4, pp. 812-19.CrossRef H.M. Henao, F. Kongoli, and K. Itagaki: Mater. Trans. JIM, 2005, vol. 46, no. 4, pp. 812-19.CrossRef
20.
Zurück zum Zitat E.J. Michal and R. Schuhmann: J. Met., 1952, vol. 4, pp. 723-28. E.J. Michal and R. Schuhmann: J. Met., 1952, vol. 4, pp. 723-28.
21.
Zurück zum Zitat L. Yang: Ph.D. Dissertation, University of Newcastle, Sydney, Australia, 1994. L. Yang: Ph.D. Dissertation, University of Newcastle, Sydney, Australia, 1994.
22.
Zurück zum Zitat S. Sun and S. Jahanshahi: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 937-44.CrossRef S. Sun and S. Jahanshahi: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 937-44.CrossRef
23.
Zurück zum Zitat B. Pei: Scand. J. Metall., 1993, vol. 22, pp. 24-29. B. Pei: Scand. J. Metall., 1993, vol. 22, pp. 24-29.
24.
25.
Zurück zum Zitat I. Ansara and B. Sundman: Computer Handling and Dissemination of Data, ed., P.S. Glaser, Elsevier Science Ltd., Atlanta, GA, 1986, pp. 154-58. I. Ansara and B. Sundman: Computer Handling and Dissemination of Data, ed., P.S. Glaser, Elsevier Science Ltd., Atlanta, GA, 1986, pp. 154-58.
26.
Zurück zum Zitat G. Roghani, Y. Takeda, and K. Itagaki: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 705-12.CrossRefADS G. Roghani, Y. Takeda, and K. Itagaki: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 705-12.CrossRefADS
27.
Zurück zum Zitat G. Roghani, J.C. Font, M. Hino, and K. Itagaki: Mater. Trans. JIM, 1996, vol. 37, pp. 1574-79. G. Roghani, J.C. Font, M. Hino, and K. Itagaki: Mater. Trans. JIM, 1996, vol. 37, pp. 1574-79.
Metadaten
Titel
Thermodynamics of Arsenic in FeOx-CaO-SiO2 Slags
verfasst von
Chunlin Chen
Sharif Jahanshahi
Publikationsdatum
01.12.2010
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions B / Ausgabe 6/2010
Print ISSN: 1073-5615
Elektronische ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-010-9430-0

Weitere Artikel der Ausgabe 6/2010

Metallurgical and Materials Transactions B 6/2010 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.