Top

Metallurgist

Published in:

25-01-2018

Use of Alternative Carbon Sources for Slag Foaming in Electric Arc Furnaces

Author: A. Yu. Kem

Published in: Metallurgist | Issue 9-10/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

One of the current trends in resource saving in steel making is replacement of conventional carbonaceous materials by recycled carbonaceous materials (RCM), such as end-of-life tires containing carbon black. A “cold model” is used to study the foaming of steelmaking slag, the structure and morphology of products of thermal degradation of RCMs and their effect on the foaming process. The energy efficiency of the foaming process where conventional carbonaceous materials are partially replaced by RCMs is evaluated.

previous article Effect of the Thermal Insulation of the Inner Wall on the Thermal Condition of the Air Tuyeres of Blast Furnaces

next article Effect of Ferrite Content on High-Temperature Strength of 12% Chromium Steels with a Ferritic-Martensitic Structure

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Yu. S. Karabasov (ed.), Steel at the Turn of the Century, MISiS, Moscow (2001).

A. P. Luz, T.A. Avila, P. Bonadia, et. al., “Slag foaming: Fundamentals, experimental evaluation and application in the steelmaking industry,” Refractories Worldforum, 3, No. 2, 91–98 (2011).

Al. G. Shalimov, “Slag foaming in an electric arc furnace,” Elektrometallurgiya, No. 9, 9–13 (2013).

A. Fontana, P. O’Kane, D. O’Connell, et al., “Polymer injection technology as foaming slag agent in the EAF: Operations in Australia and Thailand,” SEAISI Quart. J., No. 2, 30–39 (2012).

E. V. Shtapura, Yu. I. Zhavoronkov, et al., “Modeling the blowing of melted steel in a ladle,” Chern. Metallurg., Byull. NTiEI, No. 5, 43–46 (2009).

NanoEducator Scanning Probe Microscope: User’s Guide (Mac OS), Nanotekhnologiya-MTD, Moscow (2006).

PHYWE Systeme GmbH & Co. KG, Investigate in Magnetic Micro and Nano Structures by Magnetic Force Microscopy (MFM).

PHYWE Systeme GmbH & Co. KG, Compact Atomic Force Microscope (AFM) – Visualisation and Characterisation on the Nanoscale.

A. A. Kozhukhov, V. V. Fedin, and E. E. Merker, “Study of the foaming of steelmaking slag and its effect on the thermal performance of an electric-arc furnace,” Metallurg, No. 3, 42–44 (2012).

10.

A. A. Kozhukhov, E. E. Merker, and G. A. Karpenko, “Behavior of foaming bath with gas-dynamic dust removal above oxygen-injection zone in converter,” Izv. VUZ., Chern. Metall., No. 5, 16–19 (2000).

11.

V. V. Fedin, Development of Energy-Saving Mode of Melting Iron-Rich Pellets in an EAF to Improve Production Efficiency: Auth. Abstr. Dissert. Cand. Techn. Sci., MISiS, Moscow (2003).

12.

V. I. Yavoiskii, G. A. Dorofeev, and I. L. Povkh, Theory of Blowing Steel-Smelting Bath, Metallurgiya, Moscow (1974).

13.

A. A. Kozhukhov, Energy-Saving Steelmaking Based on Slag Foaming, LAP LAMBERT Academic Publishing (2011).

14.

A. Yu. Kem and A. K. Pavlyuk, Calculating the Main Parameters and Improving the Process of Smelting 22KhG2А Steel Semiproduct in DSP-150 to Obtain Continuously Cast Hollow Billets for Seamless Casings, dep. at VINITI No. 263-В2014, Sept. 30, 2014, Donsk. Gos. Univ., Rostov-on-Don (2014).

15.

V. A. Bigeev, A. E. Malofeev, E. B. Agapitov, et al., “Slag oxidation in arc furnaces,” Stal, No. 9, 22–23 (2011).

16.

A. M. Amdur, M. Lkhamsuren, V. V. Pavlov, and P. Barnasan, “Structure and thermodynamic activity of sooty carbon,” Izv. VUZ., Chern. Metall., No. 6, 12–16 (2014).

17.

V. M. Zaichenko, V. V. Kosov, V. F. Kosov, and V. A. Sinel’shchikov, “Determining the reactivity of carbon composites,” Stal, No. 9, 70–72 (2011).

18.

V. P. Luzgin, K. L. Kosyrev, and O. A. Komolova, “Energy aspects of using alternative energy resources in EAF steelmaking,” Chern. Metal., No. 10, 8–12 (2010).

19.

GOST R 54260-2010, Resources Saving. Waste Management. Standard Practice for Use of Scrap Tire-Derived Fuel, Standardinform, Moscow (2011).

Title: Use of Alternative Carbon Sources for Slag Foaming in Electric Arc Furnaces
Author: A. Yu. Kem
Publication date: 25-01-2018
Publisher: Springer US
Published in: Metallurgist / Issue 9-10/2018
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-018-0559-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9-10/2018

Heat Treatment Regime Optimization for High-Strength Low-Carbon Steel Forged Slabs

Analysis of the Blast-Furnace Process at High Smelting Rate

Development of a Production Scheme for Processing Rebellious Gold-Containing Flotation Concentrates by Autoclave Oxidation

Study of the Metal Properties and Structure of a Large Shell Made of 15Kh2MFA Steel

Manufacture of High-Carbon Ferrochrome Using Anthracite

Effect of Ferrite Content on High-Temperature Strength of 12% Chromium Steels with a Ferritic-Martensitic Structure

Premium Partners