Skip to main content
Top
Published in: Wood Science and Technology 2/2018

12-12-2017 | Original

Elastic characterization of wood by Resonant Ultrasound Spectroscopy (RUS): a comprehensive study

Authors: R. Longo, D. Laux, S. Pagano, T. Delaunay, E. Le Clézio, O. Arnould

Published in: Wood Science and Technology | Issue 2/2018

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The main principle of Resonant Ultrasound Spectroscopy (RUS) measurement method is to excite a sample and to deduce its elastic constants from its free mechanical resonant frequencies. The goal of this paper is to propose an application of RUS in the case of wood cubic samples by: (1) using frequencies and mode shapes (or vibration patterns) of the free resonant modes in an iterative numerical procedure to solve the inverse problem for identifying components of the stiffness tensor of the sample’s material, (2) finding the limits and optimizing the robustness of the identification procedure in the case of wood and (3) applying it to a large density range of wood samples. Specific continuous waves have been used as excitation signal in order to experimentally determine the free resonant frequencies and mode shapes of the sample in a faster way by means of Scanning Doppler Vibrometer measurements. Afterward, the stiffness tensor was derived by solving iteratively an inverse problem. The gain of using the mode shapes in the inverse identification procedure is demonstrated to be particularly necessary for wood, especially for pairing each measured frequency with its corresponding theoretically predicted one, as viscoelastic damping causes the resonant peaks to overlap and/or disappear. A sensitivity analysis of each elastic constant on the measured resonant frequencies has thus been performed. It shows that, in its current state of development, not all of the elastic constants can be identified robustly and a modified identification procedure is thus proposed. This modified procedure has been applied successfully to wood samples with a large density range, including softwood and hardwood, and particularly non-homogeneous wood species or with specific anatomical features.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Appendix
Available only for authorised users
Literature
go back to reference Arnould O, Stürzenbecher R, Bardet S, Hofstetter K, Guibal D, Amusant N, Pizzi A (2010) Mechanical potential of eco-OSB produced from durable and nondurable species and natural resins. Holzforschung 64(6):791–798CrossRef Arnould O, Stürzenbecher R, Bardet S, Hofstetter K, Guibal D, Amusant N, Pizzi A (2010) Mechanical potential of eco-OSB produced from durable and nondurable species and natural resins. Holzforschung 64(6):791–798CrossRef
go back to reference Bader TK, Hofstetter K, Eberhardsteiner J, Keunecke D (2012) Microstructure–stiffness relationships of common yew and Norway spruce. Strain 48(4):306–316CrossRef Bader TK, Hofstetter K, Eberhardsteiner J, Keunecke D (2012) Microstructure–stiffness relationships of common yew and Norway spruce. Strain 48(4):306–316CrossRef
go back to reference Bader TK, Eberhardsteiner J, De Borst K (2017) Shear stiffness and its relation to the microstructure of 10 European and tropical hardwood species. Wood Mater Sci Eng 12(2):82–91 Bader TK, Eberhardsteiner J, De Borst K (2017) Shear stiffness and its relation to the microstructure of 10 European and tropical hardwood species. Wood Mater Sci Eng 12(2):82–91
go back to reference Bardet S, Gril J (2002) Modelling the transverse viscoelasticity of green wood using a combination of two parabolic elements. C R Mécanique 330(8):549–556CrossRef Bardet S, Gril J (2002) Modelling the transverse viscoelasticity of green wood using a combination of two parabolic elements. C R Mécanique 330(8):549–556CrossRef
go back to reference Bernard S, Grimal Q, Haupert S, Laugier P (2011) Assessment of anisotropic elasticity of small bone samples with resonant ultrasound spectroscopy: attenuation does not prevent the measurements. In: IEEE International Ultrasonics Symposium, pp 1599–1602. https://doi.org/10.1109/ULTSYM.2011.0397 Bernard S, Grimal Q, Haupert S, Laugier P (2011) Assessment of anisotropic elasticity of small bone samples with resonant ultrasound spectroscopy: attenuation does not prevent the measurements. In: IEEE International Ultrasonics Symposium, pp 1599–1602. https://​doi.​org/​10.​1109/​ULTSYM.​2011.​0397
go back to reference Bernard S, Grimal Q, Laugier P (2014) Resonant ultrasound spectroscopy for viscoelastic characterization of anisotropic attenuative solid materials. J Acoust Soc Am 135(5):2601–2613CrossRefPubMed Bernard S, Grimal Q, Laugier P (2014) Resonant ultrasound spectroscopy for viscoelastic characterization of anisotropic attenuative solid materials. J Acoust Soc Am 135(5):2601–2613CrossRefPubMed
go back to reference Bernard S, Marrelec G, Laugier P, Grimal Q (2015) Bayesian normal modes identification and estimation of elastic coefficients in resonant ultrasound spectroscopy. Inverse Probl 31(6):065 010CrossRef Bernard S, Marrelec G, Laugier P, Grimal Q (2015) Bayesian normal modes identification and estimation of elastic coefficients in resonant ultrasound spectroscopy. Inverse Probl 31(6):065 010CrossRef
go back to reference Brabec M, Lagaña R, Milch J, Tippner J, Sebera V (2017) Utilization of digital image correlation in determining of both longitudinal shear moduli of wood at single torsion test. Wood Sci Technol 51(1):29–45CrossRef Brabec M, Lagaña R, Milch J, Tippner J, Sebera V (2017) Utilization of digital image correlation in determining of both longitudinal shear moduli of wood at single torsion test. Wood Sci Technol 51(1):29–45CrossRef
go back to reference Brancheriau L, Baillères H (2002) Natural vibration analysis of clear wooden beams: a theoretical review. Wood Sci Technol 36(4):347–365CrossRef Brancheriau L, Baillères H (2002) Natural vibration analysis of clear wooden beams: a theoretical review. Wood Sci Technol 36(4):347–365CrossRef
go back to reference Brémaud I, Cabrolier P, Gril J, Clair B, Gerard J, Minato K, Thibaut B (2010) Identification of anisotropic vibrational properties of Padauk wood with interlocked grain. Wood Sci Technol 44(3):355–367CrossRef Brémaud I, Cabrolier P, Gril J, Clair B, Gerard J, Minato K, Thibaut B (2010) Identification of anisotropic vibrational properties of Padauk wood with interlocked grain. Wood Sci Technol 44(3):355–367CrossRef
go back to reference Brémaud I, Gril J, Thibaut B (2011) Anisotropy of wood vibrational properties: dependence on grain angle and review of literature data. Wood Sci Technol 45(4):735–754CrossRef Brémaud I, Gril J, Thibaut B (2011) Anisotropy of wood vibrational properties: dependence on grain angle and review of literature data. Wood Sci Technol 45(4):735–754CrossRef
go back to reference Brémaud I, Ruelle J, Thibaut A, Thibaut B (2013) Changes in viscoelastic vibrational properties between compression and normal wood: roles of microfibril angle and of lignin. Holzforschung 67(1):75–85CrossRef Brémaud I, Ruelle J, Thibaut A, Thibaut B (2013) Changes in viscoelastic vibrational properties between compression and normal wood: roles of microfibril angle and of lignin. Holzforschung 67(1):75–85CrossRef
go back to reference Bruno L, Poggialini A (2005) Elastic characterization of anisotropic materials by Speckle interferometry. Exp Mech 45(3):205–212CrossRef Bruno L, Poggialini A (2005) Elastic characterization of anisotropic materials by Speckle interferometry. Exp Mech 45(3):205–212CrossRef
go back to reference Bruno L, Felice G, Pagnotta L, Poggialini A, Stigliano G (2008) Elastic characterization of orthotropic plates of any shape via static testing. Int J Solids Struct 45(3–4):908–920CrossRef Bruno L, Felice G, Pagnotta L, Poggialini A, Stigliano G (2008) Elastic characterization of orthotropic plates of any shape via static testing. Int J Solids Struct 45(3–4):908–920CrossRef
go back to reference Bucur V (2006) Acoustics of wood, 2nd edn. Springer, Berlin Bucur V (2006) Acoustics of wood, 2nd edn. Springer, Berlin
go back to reference Bucur V, Archer RR (1984) Elastic constants for wood by an ultrasonic method. Wood Sci Technol 18(4):255–265CrossRef Bucur V, Archer RR (1984) Elastic constants for wood by an ultrasonic method. Wood Sci Technol 18(4):255–265CrossRef
go back to reference Bucur V, Rasolofosaon P (1998) Dynamic elastic anisotropy and nonlinearity in wood and rock. Ultrasonics 36(7):813–824CrossRef Bucur V, Rasolofosaon P (1998) Dynamic elastic anisotropy and nonlinearity in wood and rock. Ultrasonics 36(7):813–824CrossRef
go back to reference Dahl KB, Malo KA (2009) Linear shear properties of spruce softwood. Wood Sci Technol 43(5–6):499–525CrossRef Dahl KB, Malo KA (2009) Linear shear properties of spruce softwood. Wood Sci Technol 43(5–6):499–525CrossRef
go back to reference Dahmen S, Ketata H, Ben Ghozlen M, Hosten B (2010) Elastic constants measurement of anisotropic Olivier wood plates using air-coupled transducers generated Lamb wave and ultrasonic bulk wave. Ultrasonics 50(4–5):502–507CrossRefPubMed Dahmen S, Ketata H, Ben Ghozlen M, Hosten B (2010) Elastic constants measurement of anisotropic Olivier wood plates using air-coupled transducers generated Lamb wave and ultrasonic bulk wave. Ultrasonics 50(4–5):502–507CrossRefPubMed
go back to reference De Borst K, Bader TK, Wikete C (2012) Microstructure–stiffness relationships of ten European and tropical hardwood species. J Struct Biol 177:532–542CrossRefPubMed De Borst K, Bader TK, Wikete C (2012) Microstructure–stiffness relationships of ten European and tropical hardwood species. J Struct Biol 177:532–542CrossRefPubMed
go back to reference Delaunay T, Le Clézio E, Guennou M, Dammak H, Pham Thi M, Feuillard G (2008) Full tensorial characterization of single PZN-12%PT crystal by resonant ultrasound spectroscopy. IEEE Trans Ultrason Ferroelectr Freq Control 55(2):476–488CrossRefPubMed Delaunay T, Le Clézio E, Guennou M, Dammak H, Pham Thi M, Feuillard G (2008) Full tensorial characterization of single PZN-12%PT crystal by resonant ultrasound spectroscopy. IEEE Trans Ultrason Ferroelectr Freq Control 55(2):476–488CrossRefPubMed
go back to reference Dünisch O (2017) Relationship between anatomy and vibration behaviour of softwoods and hardwoods. IAWA J 38(1):81–98CrossRef Dünisch O (2017) Relationship between anatomy and vibration behaviour of softwoods and hardwoods. IAWA J 38(1):81–98CrossRef
go back to reference El Mouridi M, Laurent T, Brancheriau L, Arnould O, Famiri A, Hakam A, Gril J (2011) Searching for material symmetries in the burr wood of thuja by a direct contact ultrasonic method on spherical samples. Maderas-Cienc tecnol 13(3):285–296CrossRef El Mouridi M, Laurent T, Brancheriau L, Arnould O, Famiri A, Hakam A, Gril J (2011) Searching for material symmetries in the burr wood of thuja by a direct contact ultrasonic method on spherical samples. Maderas-Cienc tecnol 13(3):285–296CrossRef
go back to reference Fang CH, Guibal D, Clair B, Gril J, Liu YM, Liu SQ (2008) Relationships between growth stress and wood properties in poplar I-69 (Populus deltoides Bartr. cv. “Lux” ex I-69/55). Ann For Sci 65(3):307CrossRef Fang CH, Guibal D, Clair B, Gril J, Liu YM, Liu SQ (2008) Relationships between growth stress and wood properties in poplar I-69 (Populus deltoides Bartr. cv. “Lux” ex I-69/55). Ann For Sci 65(3):307CrossRef
go back to reference Farzbod F, Hurley DH (2012) Using eigenmodes to perform the inverse problem associated with resonant ultrasound spectroscopy. IEEE Trans Ultrason Ferroelectr Freq Control 59(11):2470–2475CrossRefPubMed Farzbod F, Hurley DH (2012) Using eigenmodes to perform the inverse problem associated with resonant ultrasound spectroscopy. IEEE Trans Ultrason Ferroelectr Freq Control 59(11):2470–2475CrossRefPubMed
go back to reference Forest Products Laboratory (2010) Wood handbook—wood as an engineering material. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, WI, General Technical Report FPL-GTR-190 Forest Products Laboratory (2010) Wood handbook—wood as an engineering material. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, WI, General Technical Report FPL-GTR-190
go back to reference François M, Geymonat G, Berthaud Y (1998) Determination of the symmetries of an experimentally determined stiffness tensor: application to acoustic measurements. Int J Solids Struct 35(31–32):4091–4106CrossRef François M, Geymonat G, Berthaud Y (1998) Determination of the symmetries of an experimentally determined stiffness tensor: application to acoustic measurements. Int J Solids Struct 35(31–32):4091–4106CrossRef
go back to reference Garab J, Keunecke D, Hering S, Szalai J, Niemz P (2010) Measurement of standard and off-axis elastic moduli and Poisson’s ratios of spruce and yew wood in the transverse plane. Wood Sci Technol 44(3):451–464CrossRef Garab J, Keunecke D, Hering S, Szalai J, Niemz P (2010) Measurement of standard and off-axis elastic moduli and Poisson’s ratios of spruce and yew wood in the transverse plane. Wood Sci Technol 44(3):451–464CrossRef
go back to reference Gindl W (2002) Comparing mechanical properties of normal and compression wood in Norway spruce: the role of lignin in compression parallel to the grain. Holzforschung 56(4):395–401CrossRef Gindl W (2002) Comparing mechanical properties of normal and compression wood in Norway spruce: the role of lignin in compression parallel to the grain. Holzforschung 56(4):395–401CrossRef
go back to reference Gonçalves R, Trinca AJ, Cerri DGP (2011) Comparison of elastic constants of wood determined by ultrasonic wave propagation and static compression test. Wood Fiber Sci 43(1):64–75 Gonçalves R, Trinca AJ, Cerri DGP (2011) Comparison of elastic constants of wood determined by ultrasonic wave propagation and static compression test. Wood Fiber Sci 43(1):64–75
go back to reference Gonçalves R, Trinca AJ, Pellis BP (2014) Elastic constants of wood determined by ultrasound using three geometries of specimens. Wood Sci Technol 48(2):269–287CrossRef Gonçalves R, Trinca AJ, Pellis BP (2014) Elastic constants of wood determined by ultrasound using three geometries of specimens. Wood Sci Technol 48(2):269–287CrossRef
go back to reference Grimsel M (1998) Computer-aided identification of mechanical wood properties. In: Kurjatko S, Kúdela J (eds) Wood structure and properties’98, Arbora Publishers, Zvolen, pp 185–192 Grimsel M (1998) Computer-aided identification of mechanical wood properties. In: Kurjatko S, Kúdela J (eds) Wood structure and properties’98, Arbora Publishers, Zvolen, pp 185–192
go back to reference Guillaume P, Schoukens J, Pintelon R, Kollar I (1991) Crest-factor minimization using nonlinear Chebyshev approximation methods. IEEE Trans Instrum Meas 40(6):982–989CrossRef Guillaume P, Schoukens J, Pintelon R, Kollar I (1991) Crest-factor minimization using nonlinear Chebyshev approximation methods. IEEE Trans Instrum Meas 40(6):982–989CrossRef
go back to reference Guitard D, El Amri F (1987) Modèles prévisionnels de comportement élastique tridimensionnel pour les bois feuillus et les bois résineux (Predictive models of tridimensional elastic behavior of hardwoods and softwoods). Ann Sci For 44(3):335–358 (in French) CrossRef Guitard D, El Amri F (1987) Modèles prévisionnels de comportement élastique tridimensionnel pour les bois feuillus et les bois résineux (Predictive models of tridimensional elastic behavior of hardwoods and softwoods). Ann Sci For 44(3):335–358 (in French) CrossRef
go back to reference Guitard D, Gachet C (2004) Paramètres structuraux et/ou ultrastructuraux facteurs de la variabilité intra-arbre de l’anisotropie élastique du bois (Structural and/or ultrastructural parameters factors of intra-tree wood elastic anisotropy variability). Ann For Sci 61:129–139 (in French) CrossRef Guitard D, Gachet C (2004) Paramètres structuraux et/ou ultrastructuraux facteurs de la variabilité intra-arbre de l’anisotropie élastique du bois (Structural and/or ultrastructural parameters factors of intra-tree wood elastic anisotropy variability). Ann For Sci 61:129–139 (in French) CrossRef
go back to reference Hassel B, Berard P, Modén C, Berglund L (2009) The single cube apparatus for shear testing—full-field strain data and finite element analysis of wood in transverse shear. Compos Sci Technol 69:877–882CrossRef Hassel B, Berard P, Modén C, Berglund L (2009) The single cube apparatus for shear testing—full-field strain data and finite element analysis of wood in transverse shear. Compos Sci Technol 69:877–882CrossRef
go back to reference Hering S, Keunecke D, Niemz P (2012) Moisture-dependent orthotropic elasticity of beech wood. Wood Sci Technol 46(5):927–938CrossRef Hering S, Keunecke D, Niemz P (2012) Moisture-dependent orthotropic elasticity of beech wood. Wood Sci Technol 46(5):927–938CrossRef
go back to reference Keunecke D, Sonderegger W, Pereteanu K, Lüthi T, Niemz P (2007) Determination of Young’s and shear moduli of common yew and Norway spruce by means of ultrasonic waves. Wood Sci Technol 41:309–327CrossRef Keunecke D, Sonderegger W, Pereteanu K, Lüthi T, Niemz P (2007) Determination of Young’s and shear moduli of common yew and Norway spruce by means of ultrasonic waves. Wood Sci Technol 41:309–327CrossRef
go back to reference Keunecke D, Hering S, Niemz P (2008) Three-dimensional elastic behaviour of common yew and Norway spruce. Wood Sci Technol 42(8):633–647CrossRef Keunecke D, Hering S, Niemz P (2008) Three-dimensional elastic behaviour of common yew and Norway spruce. Wood Sci Technol 42(8):633–647CrossRef
go back to reference Keunecke D, Merz T, Sonderreger W, Schnider T, Niemz P (2011) Stiffness moduli of various softwood and hardwood species determined with ultrasound. Wood Mater Sci Eng 6(3):91–94CrossRef Keunecke D, Merz T, Sonderreger W, Schnider T, Niemz P (2011) Stiffness moduli of various softwood and hardwood species determined with ultrasound. Wood Mater Sci Eng 6(3):91–94CrossRef
go back to reference Kohlhauser C, Hellmich C (2012) Determination of Poisson’s ratios in isotropic, transversely isotropic, and orthotropic materials by means of combined ultrasonic-mechanical testing of normal stiffnesses: Application to metals and wood. Eur J Mech A Solid 33:82–98CrossRef Kohlhauser C, Hellmich C (2012) Determination of Poisson’s ratios in isotropic, transversely isotropic, and orthotropic materials by means of combined ultrasonic-mechanical testing of normal stiffnesses: Application to metals and wood. Eur J Mech A Solid 33:82–98CrossRef
go back to reference Kohlhauser C, Hellmich C, Vitale-Brovarone C, Boccaccini AR, Rota A, Eberhardsteiner J (2009) Ultrasonic characterisation of porous biomaterials across different frequencies. Strain 45(1):34–44CrossRef Kohlhauser C, Hellmich C, Vitale-Brovarone C, Boccaccini AR, Rota A, Eberhardsteiner J (2009) Ultrasonic characterisation of porous biomaterials across different frequencies. Strain 45(1):34–44CrossRef
go back to reference Laghdir A, Fortin Y, De La Cruz CM, Hernández RE (2008) Development of a technique to determine the 3D elasticty tensor of wood as applied to drying stress modeling. Maderas-Cienc tecnol 10(1):35–44CrossRef Laghdir A, Fortin Y, De La Cruz CM, Hernández RE (2008) Development of a technique to determine the 3D elasticty tensor of wood as applied to drying stress modeling. Maderas-Cienc tecnol 10(1):35–44CrossRef
go back to reference Laux D, Ferrandis JY, Leveque G, Gatt JM (2006) Elastic properties of composites: periodical homogenisation technique and experimental comparison using acoustic microscopy and resonant ultrasonic spectroscopy. Ultrasonics 45:104–112CrossRefPubMed Laux D, Ferrandis JY, Leveque G, Gatt JM (2006) Elastic properties of composites: periodical homogenisation technique and experimental comparison using acoustic microscopy and resonant ultrasonic spectroscopy. Ultrasonics 45:104–112CrossRefPubMed
go back to reference Longo R, Vanherzeele J, Vanlanduit S, Guillaume P (2008) Underwater visualization of multi-input interleaved multisine wave fronts for ultrasonic testing of bones specimens using Laser Doppler vibrometry. In: 8th international conference on vibration measurements by laser techniques: advances and applications, proceedings SPIE, vol 70980T. https://doi.org/10.1117/12.803032 Longo R, Vanherzeele J, Vanlanduit S, Guillaume P (2008) Underwater visualization of multi-input interleaved multisine wave fronts for ultrasonic testing of bones specimens using Laser Doppler vibrometry. In: 8th international conference on vibration measurements by laser techniques: advances and applications, proceedings SPIE, vol 70980T. https://​doi.​org/​10.​1117/​12.​803032
go back to reference Longo R, Delaunay T, Laux D, El Mouridi M, Arnould O, Le Clézio E (2012) Wood elastic characterization from a single sample by resonant ultrasound spectroscopy. Ultrasonics 52:971–974CrossRefPubMed Longo R, Delaunay T, Laux D, El Mouridi M, Arnould O, Le Clézio E (2012) Wood elastic characterization from a single sample by resonant ultrasound spectroscopy. Ultrasonics 52:971–974CrossRefPubMed
go back to reference Majano-Majano A, Fernandez-Cabo JL, Hoheisel S, Klein M (2012) A test method for characterizing clear wood using a single specimen. Exp Mech 52:1079–1096CrossRef Majano-Majano A, Fernandez-Cabo JL, Hoheisel S, Klein M (2012) A test method for characterizing clear wood using a single specimen. Exp Mech 52:1079–1096CrossRef
go back to reference Mesnil O, Ruzzene M (2016) Sparse wavefield reconstruction and source detection using compressed sensing. Ultrasonics 67:94–104CrossRefPubMed Mesnil O, Ruzzene M (2016) Sparse wavefield reconstruction and source detection using compressed sensing. Ultrasonics 67:94–104CrossRefPubMed
go back to reference Migliori A, Sarrao JL, Visscher WM, Bell TM, Lei M, Fisk Z, Leisure R (1993) Resonant ultrasound spectroscopic technics for measurement of the elastic moduli of solids. Physica B 183:1–24CrossRef Migliori A, Sarrao JL, Visscher WM, Bell TM, Lei M, Fisk Z, Leisure R (1993) Resonant ultrasound spectroscopic technics for measurement of the elastic moduli of solids. Physica B 183:1–24CrossRef
go back to reference Obataya E, Ono T, Norimoto M (2000) Vibrational properties of wood along the grain. J Mater Sci 35:2993–3001CrossRef Obataya E, Ono T, Norimoto M (2000) Vibrational properties of wood along the grain. J Mater Sci 35:2993–3001CrossRef
go back to reference Ozyhar T, Hering S, Niemz P (2013a) Moisture-dependent orthotropic tension–compression asymmetry of wood. Holzforschung 67(4):395–404 Ozyhar T, Hering S, Niemz P (2013a) Moisture-dependent orthotropic tension–compression asymmetry of wood. Holzforschung 67(4):395–404
go back to reference Ozyhar T, Hering S, Sanabria SJ, Niemz P (2013b) Determining moisture-dependent elastic characteristics of beech wood by means of ultrasonic waves. Wood Sci Technol 47(2):329–341CrossRef Ozyhar T, Hering S, Sanabria SJ, Niemz P (2013b) Determining moisture-dependent elastic characteristics of beech wood by means of ultrasonic waves. Wood Sci Technol 47(2):329–341CrossRef
go back to reference Reiterer A, Stanzl-Tschegg SE (2001) Compressive behaviour of softwood under uniaxial loading at diffrent orientations to the grain. Mech Mater 33:705–715CrossRef Reiterer A, Stanzl-Tschegg SE (2001) Compressive behaviour of softwood under uniaxial loading at diffrent orientations to the grain. Mech Mater 33:705–715CrossRef
go back to reference Ruelle J, Beauchêne J, Thibaut A, Thibaut B (2007) Comparison of physical and mechanical properties of tension and opposite wood from ten tropical rainforest trees from different species. Ann For Sci 64:503–510CrossRef Ruelle J, Beauchêne J, Thibaut A, Thibaut B (2007) Comparison of physical and mechanical properties of tension and opposite wood from ten tropical rainforest trees from different species. Ann For Sci 64:503–510CrossRef
go back to reference Ruelle J, Beauchêne J, Yamamoto H, Thibaut B (2011) Variations in physical and mechanical properties between tension and opposite wood from three tropical rainforest species. Wood Sci Technol 45(2):339–357CrossRef Ruelle J, Beauchêne J, Yamamoto H, Thibaut B (2011) Variations in physical and mechanical properties between tension and opposite wood from three tropical rainforest species. Wood Sci Technol 45(2):339–357CrossRef
go back to reference Schoch W, Heller I, Schweingruber FH, Kienast F (2004) Wood anatomy of central European species. Online version: www.woodanatomy.ch. Accessed 15 Nov 2017 Schoch W, Heller I, Schweingruber FH, Kienast F (2004) Wood anatomy of central European species. Online version: www.​woodanatomy.​ch. Accessed 15 Nov 2017
go back to reference Scholz G, Liebner F, Koch G, Bues CT, Günther B, Bäucker E (2007) Chemical, anatomical and technological properties of Snakewood [Brosimum guianense (Aubl.) Huber]. Wood Sci Technol 41:673–686CrossRef Scholz G, Liebner F, Koch G, Bues CT, Günther B, Bäucker E (2007) Chemical, anatomical and technological properties of Snakewood [Brosimum guianense (Aubl.) Huber]. Wood Sci Technol 41:673–686CrossRef
go back to reference Schubert SI, Gsell D, Dual J, Motavalli M, Niemz P (2006) Rolling shear modulus and damping factor of spruce and decayed spruce estimated by modal analysis. Holzforschung 60:78–84CrossRef Schubert SI, Gsell D, Dual J, Motavalli M, Niemz P (2006) Rolling shear modulus and damping factor of spruce and decayed spruce estimated by modal analysis. Holzforschung 60:78–84CrossRef
go back to reference Se Golpayegani A, Brémaud I, Gril J, Thevenon MF, Arnould O, Pourtahmasi K (2012) Effect of extractions on dynamic mechanical properties of white mulberry (Morus alba). J Wood Sci 58:153–162CrossRef Se Golpayegani A, Brémaud I, Gril J, Thevenon MF, Arnould O, Pourtahmasi K (2012) Effect of extractions on dynamic mechanical properties of white mulberry (Morus alba). J Wood Sci 58:153–162CrossRef
go back to reference Seichepine JL (1980) Mise au point d’une méthode expérimentale destinée à l’identification de la matrice des complaisances élastiques de solides anisotropes : Application aux matériaux bois (Development of an experimental method for the identification of the elastic compliance matrix of anisotropic solids: application to wood materials). PhD thesis, I.N.P. de Lorraine, Nancy (in French) Seichepine JL (1980) Mise au point d’une méthode expérimentale destinée à l’identification de la matrice des complaisances élastiques de solides anisotropes : Application aux matériaux bois (Development of an experimental method for the identification of the elastic compliance matrix of anisotropic solids: application to wood materials). PhD thesis, I.N.P. de Lorraine, Nancy (in French)
go back to reference Sliker A (1988) A method for predicting non-shear compliances in the RT plane of wood. Wood Fiber Sci 20(1):44–55 Sliker A (1988) A method for predicting non-shear compliances in the RT plane of wood. Wood Fiber Sci 20(1):44–55
go back to reference Sliker A (1989) Measurement of the smaller Poisson’s ratios and related compliances for wood. Wood Fiber Sci 21(3):252–262 Sliker A (1989) Measurement of the smaller Poisson’s ratios and related compliances for wood. Wood Fiber Sci 21(3):252–262
go back to reference Vázquez C, Gonçalves R, Bertoldo C, Baño V, Vega A, Crespo J, Guaita M (2015) Determination of the mechanical properties of Castanea sativa Mill. using ultrasonic wave propagation and comparison with static compression and bending methods. Wood Sci Technol 49(3):607–622CrossRef Vázquez C, Gonçalves R, Bertoldo C, Baño V, Vega A, Crespo J, Guaita M (2015) Determination of the mechanical properties of Castanea sativa Mill. using ultrasonic wave propagation and comparison with static compression and bending methods. Wood Sci Technol 49(3):607–622CrossRef
go back to reference Visscher WM, Migliori A, Bell TM, Reinert RA (1991) On the normal modes of free vibration of homogeneous and anisotropic elastic objects. J Acoust Soc Am 90(4):2154–2161CrossRef Visscher WM, Migliori A, Bell TM, Reinert RA (1991) On the normal modes of free vibration of homogeneous and anisotropic elastic objects. J Acoust Soc Am 90(4):2154–2161CrossRef
go back to reference Voigt W (1928) Lehrbuch der Kristallphysik (Textbook of crystal physics), reprint of the 1st edn. Teubner, Leipzig (in German) Voigt W (1928) Lehrbuch der Kristallphysik (Textbook of crystal physics), reprint of the 1st edn. Teubner, Leipzig (in German)
go back to reference Vorobyev A, Arnould O, Laux D, Longo R, van Dijk NP, Gamstedt EK (2016) Characterisation of cubic oak specimens from the Vasa ship and recent wood by means of quasi-static loading and resonance ultrasound spectroscopy (RUS). Holzforschung 70(5):457–465CrossRef Vorobyev A, Arnould O, Laux D, Longo R, van Dijk NP, Gamstedt EK (2016) Characterisation of cubic oak specimens from the Vasa ship and recent wood by means of quasi-static loading and resonance ultrasound spectroscopy (RUS). Holzforschung 70(5):457–465CrossRef
go back to reference Yamamoto H, Okuyama T, Yoshida M (1993) Method of determining the mean microfibril angle of wood over a wide range by the improved Cave’s method. Mokuzai Gakkaishi 39(4):375–381 Yamamoto H, Okuyama T, Yoshida M (1993) Method of determining the mean microfibril angle of wood over a wide range by the improved Cave’s method. Mokuzai Gakkaishi 39(4):375–381
go back to reference Yoshihara H (2012) Off-axis Young’s modulus and off-axis shear modulus of wood measured by flexural vibration tests. Holzforschung 66:207–213 Yoshihara H (2012) Off-axis Young’s modulus and off-axis shear modulus of wood measured by flexural vibration tests. Holzforschung 66:207–213
go back to reference Zhang W, Sliker A (1991) Measuring shear moduli in wood with small tension and compression samples. Wood Fiber Sci 23(1):58–68 Zhang W, Sliker A (1991) Measuring shear moduli in wood with small tension and compression samples. Wood Fiber Sci 23(1):58–68
Metadata
Title
Elastic characterization of wood by Resonant Ultrasound Spectroscopy (RUS): a comprehensive study
Authors
R. Longo
D. Laux
S. Pagano
T. Delaunay
E. Le Clézio
O. Arnould
Publication date
12-12-2017
Publisher
Springer Berlin Heidelberg
Published in
Wood Science and Technology / Issue 2/2018
Print ISSN: 0043-7719
Electronic ISSN: 1432-5225
DOI
https://doi.org/10.1007/s00226-017-0980-z

Other articles of this Issue 2/2018

Wood Science and Technology 2/2018 Go to the issue

IAWS NEWS

IAWS News