Top

Metallurgist

Published in:

01-03-2023

Experimental Mold for Producing Concast Billets from High-Alloyed Steels and Alloys. Part 1. Preliminary Thermal Testing and Design of the Mold

Authors: V. V. Stulov, O. M. Shafiev

Published in: Metallurgist | Issue 9-10/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

An experimental cylindrical mold of patented design with electric heating and a two-circuit cooling system, including an evaporation–condensation circuit, for producing cylindrical billets from high-alloy steels was manufactured and tested. A mandatory element of this design is its preheating to a temperature of 120–150°C before pouring steel and supplying cooling water to the system. The temperatures of the cooling water and walls are recorded automatically. A design calculation of mold cooling at a minimum heat flux of 0.5 MW/m² is performed.

previous article Thermal Design of CCM Mold with Slotted Water Cooling Channels

next article Research for Replacement of Gray Cast Irons for Manufacturing Electrolyzer Gas Collection Bell Cast Components

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

V. V. Stulov, “Cooling of a mold in producing concast cylindrical steel billets,” Probl. Mashinostr. Nadezhn. Mashin., No. 1, 67–72 (2017).

V. V. Stulov, Z. A. Tskhadaia, and O. M. Shafiev, “Production of steel castings in cylindrical molds,” Steel in Transl., 48, No. 5, 307–312 (2018).CrossRef

V. V. Stulov and O. M. Shafiev, “Simulating the solidification of a cylindrical steel billet,” Stal’, No. 3, 22–25 (2019).

A. S. El’darkhanov, A. S. Rubinov, and S. S-S. Akhtaev, “Control over the formation of continuously cast billets with the use of vibrating molds in machines for continuous casting,” Metallurgist, 61, No. 11–12, 1067–1074 (2018).

K. N. Vdovin, A. E. Pozin, A. A. Podosyan, and I. E. Petrov, “Mold of continuous-casting machines,” Metallurgist, 59, No. 3–4, 305–307 (2015).CrossRef

K. N. Vdovin, O. A. Marochkin, and V. V. Tochilkin, “Improvement of steel pouring in a section CBCM,” Metallurgist, 58, No. 3–4, 306–309 (2014).CrossRef

M. Hanao, M. Kawamoto, and A. Yamanaka, “Influence of mold flux on initial solidification of hypo-peritectic steel in a continuous casting mold,” Tetsu-to-Hagane. J. Iron and Steel Institute Japan, 100, No. 4, 581–590 (2014).CrossRef

H. Kania, K. Nowacki, and T. Lis, “Impact of the density of the mould powder on thickness of the layer of liquid slag in the continuous caster mould,” Metalurgija, 52, No. 2, 204–206 (2013).

V. V. Stulov, Mold for Producing Continuous Cylindrical Billets [in Russian], Patent No. 2651083 RF, IPC B22D11/055, Publ. Apr. 18, 2018; Byull. No. 11.

10.

V. V. Stulov and O. M. Shafiev, “Deformation of the crust of a steel billet in a CCM mold,” Stal’, No. 6, 13–16 (2021).

11.

V. V. Stulov, “Energy-saving technology and cooling of a slab mold for producing concast billets from high-alloyed steels,” Stal’, No. 11, 19–23 (2019).

12.

P. B. Lee, O. E. Ramirez-Lopez, K. C. Mills, et al., “Rev.: the “butterfly effect” in continuous casting,” Ironmaking and Steelmaking, 39, No. 4, 244–253 (2012).CrossRef

13.

Huixiang Yu, Xiaohuan Deng, Xinhua Wand Dong, et al., “Characteristics of subsurface inclusions in deep-drawing steel slabs at high casting speed,” Metallurg. Res. Technol., 112, 608–612 (2015).

14.

S. Street, K. James, N. Minor, et al., “Production of high-aluminium steel slabs,” Iron Steel Technol., July, 38–49 (2008).

15.

Yoichi Inoue, Mizuno Yasuhiro, Tada Kozo, et al., “Quality improvement of continuously cast slab for heavy plate,” Zairyo to Prosesu, CAMP ISIJ, 23, 24 (2010).

16.

E. V. Ametistov, V. A. Grigor’ev, B. T. Emtsev, et al., Heat and Mass Exchange: Thermotechnical Experiment [in Russian], Energoizdat, Moscow (1982).

Title: Experimental Mold for Producing Concast Billets from High-Alloyed Steels and Alloys. Part 1. Preliminary Thermal Testing and Design of the Mold
Authors: V. V. Stulov
O. M. Shafiev
Publication date: 01-03-2023
Publisher: Springer US
Published in: Metallurgist / Issue 9-10/2023
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-023-01432-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9-10/2023

Design of a Dry Slag Granulation Plant for Blast Furnace No. 5 of Severstal

Application of Mathematical Statistics to Improve Hadfield Steel Casting Impact Strength

Structure and Properties of Steel for Producing Hydrogen Sulfide Resistant Oil and Gas High Strength Pipes

Aspects of the Production Technology of Largesized Clad Plates and Large Diameter Pipes Made From Them

Influence of the Content of Reducing Agent and Scheelite Concentrate in Thermite Charges on the Physical and Mechanical Properties of Alloys Produced by Aluminothermy

Effect of Deformation by Ecap-Drawing Method on Change in Steel-Aluminum Wire Properties

Premium Partners