Top

Journal of Materials Engineering and Performance

Published in:

22-12-2017

Formulation and Assessment of a Wash-Primer Containing Lanthanum “Tannate” for Steel Temporary Protection

Authors: Oriana D’Alessandro, Gonzalo J. Selmi, Cecilia Deyá, Alejandro Di Sarli, Roberto Romagnoli

Published in: Journal of Materials Engineering and Performance | Issue 2/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Tannins are polyphenols synthesized by plants and useful for the coating industry as corrosion inhibitors. In addition, lanthanum salts have a great inhibitory effect on steel corrosion. The aim of this study was to obtain lanthanum “tannate” with adequate solubility to be incorporated as the corrosion inhibitor in a wash-primer. The “tannate” was obtained from commercial “Quebracho” tannin and 0.1 M La(NO₃)₃. The soluble tannin was determined by the Folin–Denis reagent, while the concentration of Lanthanum was obtained by a gravimetric procedure. The protective action of “tannate” on SAE 1010 steel was evaluated by linear polarization curves and corrosion potential measurements. Lanthanum “tannate” was incorporated in a wash-primer formulation and tested by corrosion potential and ionic resistance measurements. The corrosion rate was also determined by the polarization resistance technique. Besides, the primer was incorporated in an alkyd paint system and its anticorrosion performance assessed in the salt spray cabinet and by electrochemical impedance spectroscopy. Results showed that lanthanum “tannate” primer inhibits the development of deleterious iron oxyhydroxides on the steel substrate and incorporated into a paint system had a similar behavior to the primer formulated with zinc tetroxychromate.

previous article Stress Wave Attenuation in Aluminum Alloy and Mild Steel Specimens Under SHPB Tensile Testing

next article Mechanical Properties and Microstructure Evolution During Bending–Unbending Deformation of Pure Titanium Sheet

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

BS 1133 Section 6:1966—Packaging Code. Temporary Protection of Metal Surfaces Against Corrosion (During Transport and Storage)

Guide to Temporary Corrosion Protectives. National Physical Laboratory (NPL), National Corrosion Service, UK, 2003, 1-16. http://www.npl.co.uk/upload/pdf/temporary_corrosion_protectives.pdf

D.R. Gabe and D.W. Hopkins, Principles of Metal Surface Treatment and Protection, 2nd ed., Elsevier, Oxford, 1978, p 116–129CrossRef

L.L. Shreir, Corrosion Vol. II, Corrosion Control. (Newnes-Butterworth, London, 1976), Chapter 16

S. Paul, Surface Coatings: Science and Technology, 2nd ed., Wiley, Chichester, 1996, p 477–512

J.M. Waldie, Surface Coatings, Vol II: Paints and their Applications, OCCA, Oxford, 1974

E. Groshart, Preparation of Nonferrous Metals for Painting, Met. Finish., 2010, 108(11–12), p 64–68CrossRef

H. Rosenbloom, Chemistry of Wash-Primers, Ind. Eng. Chem., 1953, 45, p 2561–2568CrossRef

S. Wilbur, H. Abadin, M. Fay, D. Yu, and M.S. Tencza, Toxicological Profile for Chromium, Agency for Toxic Substances and Disease Registry (US), Atlanta, 2012

10.

L. Chromy and E. Kaminska, Non-Toxic Anticorrosion Pigments, Prog. Org. Coat., 1990, 18, p 319–324CrossRef

11.

M.J. Prior and M. Cohen, The Inhibition of the Corrosion of Iron by Some Anodic Inhibitors, J. Electrochem. Soc., 1953, 100, p 203–215CrossRef

12.

M. Gharagozlou, B. Ramezanzadeh, and Z. Baradaran, Synthesize and Characterization of a Novel Anticorrosive Cobalt Ferrite Nanoparticles Dispersed in Silica Matrix (CoFe₂O₄-SiO₂) to Improve the Corrosion Protection Performance of Epoxy Coating, Appl. Surf. Sci., 2016, 377, p 86–98CrossRef

13.

C. Deyá, G. Blustein, B. del Amo, and R. Romagnoli, Evaluation of Eco-Friendly Anticorrosive Pigments for Paints in Service Conditions, Prog. Org. Coat., 2010, 69(1), p 1–6CrossRef

14.

N.M. Ahmed, H.T.M. Abdel-Fatah, and E.A. Youssef, Corrosion Studies on Tailored Zn Co Aluminate/Kaolin Core–Shell Pigments in Alkyd Based Paints, Prog. Org. Coat., 2012, 73(1), p 76–87CrossRef

15.

M.R. Bagherzadeh, M. Ghasemi, F. Mahdavi, and H. Shariatpanahi, Investigation on Anticorrosion Performance of Nano and Micro Polyaniline in New Water-Based Epoxy Coating, Prog. Org. Coat., 2011, 72(3), p 348–352CrossRef

16.

N. Elhalawany, M.M. Saleeb, and M.K. Zahran, Novel Anticorrosive Emulsion-Type Paints Containing Organic/Inorganic Nanohybrid Particles, Prog. Org. Coat., 2014, 77(2), p 548–556CrossRef

17.

E. Shchukina, D. Shchukin, and D. Grigoriev, Effect of Inhibitor-Loaded Halloysites and Mesoporous Silica Nanocontainers on Corrosion Protection of Powder Coatings, Prog. Org. Coat., In Press, Corrected Proof, Available online 20 May 2016

18.

J.M. Falcón, F.F. Batista, and I.V. Aoki, Encapsulation of Dodecylamine Corrosion Inhibitor on Silica Nanoparticles, Electrochim. Acta, 2014, 124(1), p 109–118CrossRef

19.

D. Li, F. Wang, X. Yu, J. Wang, Q. Liu, P. Yang, Y. He, Y. Wang, and M. Zhang, Anticorrosion Organic Coating with Layered Double Hydroxide Loaded with Corrosion Inhibitor of Tungstate, Prog. Org. Coat., 2011, 71(3), p 302–309CrossRef

20.

D.N. Thuy, H.T.T. Xuan, A. Nicolay, Y. Paint, and M.-G. Olivier, Corrosion Protection of Carbon Steel by Solvent Free Epoxy Coating Containing Hydrotalcites Intercalated with Different Organic Corrosion Inhibitors, Prog. Org. Coat., 2016, 101, p 331–341CrossRef

21.

A. Yabuki, A. Kawashima, and I.W. Fathona, Self-healing Polymer Coatings with Cellulose Nanofibers Served as Pathways for the Release of a Corrosion Inhibitor, Corr. Sci., 2014, 85, p 141–146CrossRef

22.

S.H. Sonawane, B.A. Bhanvase, A.A. Jamali, S.K. Dubey, S.S. Kale, D.V. Pinjari, R.D. Kulkarni, P.R. Gogate, and A.B. Pandit, Improved Active Anticorrosion Coatings Using Layer-by-Layer Assembled ZnO Nanocontainers with Benzotriazole, Chem. Eng. J., 2012, 189–190, p 464–472CrossRef

23.

B.H. Cruz, J.M. Díaz Cruz, C. Ariño, and M. Esteban, Heavy Metal Binding by Tannic Acid, A Voltammetric Study, Electroanalysis, 2000, 12, p 1130–1137CrossRef

24.

T.K. Ross and R.A. Francis, The Treatment of Rusted Steel with Mimosa Tannin, Corros. Sci., 1978, 18, p 351–361CrossRef

25.

V.F. Vetere and R. Romagnoli, Chemical and Electrochemical Assessment of Tannins and Aqueous Primers Containing Tannins, Surf. Coat. Int., 1998, 81, p 385–391CrossRef

26.

A. Jaén, J. De Obaldía, and M.V. Rodríguez, Application of Mössbauer Spectroscopy to the Study of Tannins Inhibition of Iron and Steel Corrosion, Hyperfine Interact., 2011, 202, p 25–38CrossRef

27.

I.B. Obot and A. Madhankumar, Enhanced Corrosion Inhibition Effect of Tannic Acid in the Presence of Gallic Acid at Mild Steel/HCl Acid Solution Interface, J. Ind. Eng. Chem., 2015, 25, p 105–111CrossRef

28.

K. Chang and T. Viswanathan, Electrochemical Studies of Tannin for Corrosion Protection of Steel, Polym. Mater. Sci. Eng., 2001, 84, p 1055–1060

29.

S. Martinez and I. Štern, Thermodynamic Characterization of Metal Dissolution and Inhibitor Adsorption Processes in the Steel/Mimosa Tannin/Sulfuric Acid, Appl. Surf. Sci., 2002, 199, p 83–89CrossRef

30.

B. Qian, M. Hou, and B. Zheng, The Inhibition Effect of Tannic Acid on Mild Steel Corrosion in Seawater Wet/Dry Cyclic Conditions, Corr. Sci., 2013, 72, p 1–9CrossRef

31.

S. Martinez and I. Štern, Inhibitory Mechanism of Low-Carbon Steel Corrosion by Mimosa Tannin in Sulphuric Acid Solutions, J. Appl. Electrochem., 2001, 31, p 973–978CrossRef

32.

S. Martinez and I. Štern, Ferric-Tannate Formation and Anticorrosion Properties of Mimosa Tannin in Acid Solutions, Chem. Biochem. Eng. Q., 1999, 13, p 191–199

33.

S. Martinez, Inhibitory Mechanism of Mimosa Tannin Using Molecular Modeling and Substitutional Adsorption Isotherms, Mater. Chem. Phys., 2002, 77, p 97–102CrossRef

34.

K. Tan and M.J. Kassim, A Correlation Study on the Phenolic Profiles and Corrosion Inhibition Properties of Mangrove Tannins (Rhizophora Apiculata) as Affected by Extraction Solvents, Corr. Sci., 2011, 53(2), p 569–574CrossRef

35.

H. Gerengi, K. Schaefer, and H.I. Sahin, Corrosion-Inhibiting Effect of Mimosa Extract on Brass-MM55 Corrosion in 0.5 M H₂SO₄ Acidic Media, J. Ind. Eng. Chem., 2012, 18(6), p 2204–2210CrossRef

36.

O.R. Pardini, J.I. Amalvy, A.R. Di Sarli, R. Romagnoli, and V.F. Vetere, Formulation and Testing of a Water-Borne Primer Containing Chestnut Tannin, J. Coat. Tech., 2001, 73, p 99–106CrossRef

37.

S. Hornus Sack, R. Romagnoli, V.F. Vetere, C.I. Elsner, O. Pardini, J.I. Almalvy, and A.R. Di Sarli, Evaluation of Steel/Primer Based on Chestnut Tannin/Paint Film Systems by EIS, J. Coat. Tech., 2002, 74, p 63–69CrossRef

38.

G. Matamala, W. Smeltzer, and G. Droguett, Comparison of Steel Anticorrosion Protection Formulated with Natural Tannins Extracted from Acacia and from Pine Bark, Corr. Sci., 1994, 42, p 1351–1362CrossRef

39.

A.A. Rahim, E. Rocca, J. Steinmetz, M.J. Kassim, R. Adnan, and M. Sani Ibrahim, Mangrove Tannins and Their Flavanoid Monomers as Alternative Steel Corrosion Inhibitors in Acidic Medium, Corr. Sci., 2007, 49, p 402–417CrossRef

40.

A.A. Rahim, E. Rocca, J. Steinmetz, and M.J. Kassim, Inhibitive Action of Mangrove Tannins and Phosphoric Acid on Pre-rusted Steel via Electrochemical Methods, Corr. Sci., 2008, 50, p 1546–1550CrossRef

41.

J. Aguilar López, J.C. Jaén Jiménez, A.S. Vargas Abarca, P. Jiménez Bonilla, I. Vega Guzmán, J. Herrera Núñez, H. Borbón Alpízar, and R.M. Soto Fallas, Extracción y evaluación de taninos condensados a partir de la corteza de once especies maderables de Costa Rica, Tecnología en Marcha, 2012, 25, p 15–22CrossRef

42.

N. Rhazi, H. Hannache, M. Oumam, A. Sesbou, B. Charrier, A. Pizzi, and F. Charrier-El Bouhtoury, Green Extraction Process of Tannins Obtained from Moroccan Acacia Mollissima Barks by Microwave: Modeling and Optimization of the Process Using the Response Surface Methodology RSM, Arabian J. Chem., In Press, Corrected Proof, Available online 21 May 2015

43.

M.I. González and A. Abreu, Utilización de las Curvas de Polarización Anódica Para Determinar la Efectividad de un Convertidor de Óxidos, Revista de Ciencias Químicas de Cuba, 1984, 15, p 315–317

44.

M. Morcillo, M. García, J.R. Gancedo, and F.S. Estudio del comportamiento de diferentes productos convertidores de óxido (Study of the behavior of different products to convert rust), II Congreso Iberoamericano de Corrosión y Protección, 09–14 Nov 1986, Maracfaibo, Venezuela, Memorias, 221

45.

A.T. Ochoa, N. Polianskaya and Z.E. Álvarez, Estudio comparativo de primarios modificadores de herrumbre, (Comparative study of primers to modify rust), II Congreso Iberoamericano de Corrosión y Protección, 09–14 November 1986, Maracaibo, Venezuela, Memorias, 259

46.

G. Joseph and R. Vallejos, Determinación mediante espectroscopía Mössbauer de la formación de Fe₃O₄ en una superficie de acero cubierta con pintura anticorrosiva estabilizadora de óxido, Rev. Iberoamericana de Corrosión y Protección., 1988, 19, p 379

47.

A. Collazo, X.R. Nóvoa, C. Pérez, and B. Puga, EIS Study of the Rust Converter Effectiveness Under Different Conditions, Electrochim. Acta, 2008, 53, p 7565–7574CrossRef

48.

L.M. Ocampo, I.C.P. Margarit, O.R. Mattos, S.I. Córdoba-de-Torresi, and F.L. Fragata, Performance of Rust Converter Based in Phosphoric and Tannic Acids, Corr. Sci., 2004, 46, p 1515–1525CrossRef

49.

C.A. Giúdice, J.C. Benítez, and M.L. Tonello, Tin Tannates and Iron Tannates in Corrosion-Inhibiting Coatings, Pitt. Ver. Eur., 1998, 74, p 23–29

50.

C.A. Giúdice, J.C. Benítez, and M.L. Tonello, Testing the Use of Metallic Tannates as Inhibitors in Anticorrosion Coatings, Prot. Coat. Eur., 1999, 4, p 13–19

51.

C.A. Giúdice, J.C. Benítez, and M.L. Tonello, Chromium (VI) Tannates as Inhibitors in Anticorrosion Coatings: Influence of the Metal Content, Eur. Coat. J., 2000, 6, p 48–54

52.

A. Hadzich, S. Flores, R. Romagnoli, and J. Caprari, Estudios de tanatos de cinc preparados con polvo de tara (Caesalpinia spinosa) como pigmentos anticorrosivos en pinturas alquídicas y formulaciones de wash primers, to be held at X Latincorr 2016, México 25–28 October

53.

S. Flores, J. Caprari, L. Figueroa, and R. Romagnoli, Inhibición de la corrosión del acero por “tanatos” metálicos. Estudio comparativo de pinturas epoxídicas formuladas con tanatos metálicos en ensayos de corrosión acelerada, Intercorr 2014, Fortaleza, Brasil. 19–23 may 2014. Trabajos en CD, INTERCOORR2014_119

54.

B. Davó and J.J. de Damborenea, Use of Rare Earth Salts as Electrochemical Corrosion Inhibitors for an Al–Li–Cu (8090) Alloy in 3.56% NaCl, Electrochim. Acta, 2004, 49, p 4957–4965CrossRef

55.

M. Forsyth, K. Wilson, T. Behrsing, C. Forsyth, G.B. Deacon, and A. Phanasgoankar, Effectiveness of Rare-Earth Metal Compounds as Corrosion Inhibitors for Steel, Corrosion, 2002, 58(11), p 953–960CrossRef

56.

Y. Zhu, J. Zhuang, Y. Yu, and X. Zeng, Research on anti-corrosion property of rare earth inhibitor for X70 steel, J. Rare Earths, 2013, 31(7), p 734–740CrossRef

57.

C. Motte, M. Poelman, A. Roobroeck, M. Fedel, F. Deflorian, and M.-G. Olivier, Improvement of Corrosion Protection Offered to Galvanized Steel by Incorporation of Lanthanide Modified Nanoclays in Silane Layer, Prog. Org. Coat., 2012, 74(2), p 326–333CrossRef

58.

A. Santana, I. Pepe, E. Jimenez-Pique, S. Pellice, I. Milošev, and S. Ceré, Corrosion Protection of Carbon Steel by Silica-Based Hybrid Coatings Containing Cerium Salts: Effect of Silica Nanoparticle Content, Surf. Coat. Tech., 2015, 265(15), p 106–116CrossRef

59.

K. Juchi and Y. Huang, Effect of Rare Earth on the Coating-Forming and Mechanism of Phosphatization, J. Rare Earths, 2010, 28, p 132–135CrossRef

60.

M.F. Montemor, W. Trabelsi, M. Zheludevich, and M.G.S. Ferreira, Modification of Bis-silane Solutions with Rare-Earth Cations for Improved Corrosion Protection of Galvanized Steel Substrates, Prog. Org. Coat., 2006, 57, p 67–77CrossRef

61.

P.B. Raja and M. Golalakrishnan Sethuraman, Natural Products as Corrosion Inhibitor for Metals in Corrosive Media. A Review, Mater. Lett., 2008, 62, p 113–116CrossRef

62.

N. Bellotti, C. Deya, B. del Amo, and R. Romagnoli, Antifouling Paints with Zinc “Tannate”, Ind. Eng. Chem. Res., 2010, 49, p 3386–3390CrossRef

63.

S.B. Erdemoglu and S. Gucer, Selective Determination of Aluminium Bound with tannin in Tea Infusion, Anal. Sci., 2005, 21(8), p 1005–1008CrossRef

64.

E.C. Ferreira, A.R.A. Nogueira, G.B. Souza, and L.A.R. Batista, Effect of Drying Method and Length of Storage on Tannin and Total Phenol Concentrations in Pigeon Pea Seeds, Food Chem., 2004, 86(1), p 17–23CrossRef

65.

M. Stern and A.L. Geary, Electrochemical Polarization: I. A Theoretical Analysis of the Shape of Polarization Curves, J. Electrochem. Soc., 1957, 104, p 56–63CrossRef

66.

S. Wolynec, Técnicas eletroquímicas en corroção, Universidade de São Paulo, San Pablo, 2003, p 73

67.

SSPC STANDARDS—SSPC-PAINT 27, Basic Zinc Chromate-Vinyl Butyral Wash Primer

68.

Butvar. Polyvinyl Butiral Resin. Properties and Uses. Publication No 2008084E, Coatings Performance Materials by SOLUTIA, http://www.butvar.com

69.

C. Hare, Protective Coatings: Fundamentals of Chemistry and composition, Technology Publishing Company, Pennsylvania, 1994

70.

J. Koleske, Paint and Coating Testing Manual, ASTM, Pennsylvania, 1995

71.

G.W. Walter, A Review of Impedance Plot Methods Used for Corrosion Performance Analysis of Painted Metals, Corr. Sci., 1986, 26, p 681–703CrossRef

72.

B. del Amo, R. Romagnoli, and V.F. Vetere, Study of the Anticorrosive Properties of Zinc Phosphate and Zinc Molybdophosphate in Alkyd Paints, Corros. Rev., 1996, 14, p 121–131

73.

A. Gerhard and A. Bittner, Second Generation Phosphate Anti-Corrosive Pigments. Formulating Rules for Full Replacement of New Anti-Corrosive Pigments, J. Coat. Technol., 1986, 58, p 59–65

74.

A. Bittner, Advanced Phosphate Anticorrosion Pigments for Compliant Primers, J. Coat. Technol., 1989, 61, p 111–118

75.

B.A. Boukamp, Report CT88/265/128, CT89/214/128, University of Twente, Enschede, 1989

76.

T. Szauer, Electrical and Electrochemical Resistance for Protective non Metallic Coatings, Prog. Org. Coat., 1982, 10, p 157–170CrossRef

77.

H. Leidheiser, Electrical and Electrochemical Measurements as Predictors of Corrosion at the Metal-Organic Coatings Interface, Prog. Org. Coat., 1979, 7, p 79–104CrossRef

78.

Z. Szklarska-Smialowska and J. Mankowsky, Cathodic Inhibition of the Corrosion of Mild Steel in Phosphate, Tungstate, Arsenate and Silicate Solutions Containing Ca²⁺ Ions, Br. Corros. J., 1969, 4, p 271–275

79.

M. Kendig and J. Scully, Basic Aspects of Electrochemical Impedance Application for the Life Prediction of Organic Coatings on Metals, Corrosion, 1990, 46, p 22–29CrossRef

80.

T. Szauer, Impedance Measurements for the Evaluation of Protective Nonmetallic Coatings, Prog. Org. Coat., 1982, 10, p 171–183CrossRef

81.

S. Skale, V. Doleček, and M. Slemnik, Electrochemical Impedance Studies of Corrosion Protected Surfaces Covered with Epoxy Polyamide Coating System, Prog. Org. Coat., 2008, 62, p 387–392CrossRef

82.

C. Haynes and R. Baboian, Electromechanical Impedance Tests for Protective Coatings, ASTM, Philadelphia, 1985

83.

O. Ferraz, E. Cavalcanti, and A.R. Di Sarli, The Characterization of Protective Properties for Some Naval Steel/Polymeric Coatings/3%NaCl Solution Systems by EIS and Visual Assessment, Corr. Sci., 1995, 37, p 1267–1280CrossRef

84.

A. Amirudin and D. Thierry, Application of Electrochemical Impedance Spectroscopy to Study Efficiency of Anticorrosion Pigments in Epoxy-Polyamide Resin, Br. Corr. J., 1995, 30, p 128–134CrossRef

Title: Formulation and Assessment of a Wash-Primer Containing Lanthanum “Tannate” for Steel Temporary Protection
Authors: Oriana D’Alessandro
Gonzalo J. Selmi
Cecilia Deyá
Alejandro Di Sarli
Roberto Romagnoli
Publication date: 22-12-2017
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 2/2018
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-017-3103-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2018

Effect of Temper Condition on the Corrosion and Fatigue Performance of AA2219 Aluminum Alloy

Austenitic Reversion of Cryo-rolled Ti-Stabilized Austenitic Stainless Steel: High-Resolution EBSD Investigation

Improving the Fatigue Crack Propagation Resistance and Damage Tolerance of 2524-T3 Alloy with Amorphous Electroless Ni-P Coating

Soluble Graphene Nanosheets from Recycled Graphite of Spent Lithium Ion Batteries

A Metallurgical Investigation of the Direct Energy Deposition Surface Repair of Ferrous Alloys

Influence of Near-Surface Severe Plastic Deformation of Mild Steel on the Inhibition Performance of Sodium Molybdate and 1H-Benzotriazole in Artificial Sea Water

Premium Partners