Top

Journal of Materials Engineering and Performance

Published in:

13-09-2021

Inhomogeneous Planar Distribution of γ′ Precipitates in Waspaloy Caused by Local Spatial Consumption of MC Carbides

Authors: Hongliang Liu, Xin Zhao, Jian Dong, Lei Zheng

Published in: Journal of Materials Engineering and Performance | Issue 2/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The distribution of primary γ′ precipitates in Waspaloy after solution heat treatment at various temperatures is investigated. The γ′ precipitates distribute inhomogeneously in the matrix after sub-solvus heat treatment at 1020, 1030 and 1040 °C and are fully dissolved at 1050 °C. The inhomogeneity increases as sub-solvus temperature increases, and the γ′-precipitate-free zones appear after heat treatment at 1040 °C. For the sub-solvus heat treated samples, the matrix containing less γ′ precipitates is revealed to surround the MC carbides spatially, which is caused by the fluctuation of the concentration of γ′-forming element Ti due to the consumption by MC carbides. The inhomogeneous distribution of γ′ precipitates induces hardness fluctuation within the matrix.

previous article Effect of Solution Heat Treatment on the Microstructure and Hardness of theTi-48Al-2Cr-2Nb Alloy Prepared by Electron Beam Smelting

next article Study on the Austemperability of Thin-wall Ductile Cast Iron Produced by High-Pressure Die-casting

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

S.A. Sajjadi, A. Chaichi, H.R. Ezatpour, A. Maghsoudlou, and M.A. Kalaie, Hot Deformation Processing Map and Microstructural Evaluation of the Ni-Based Superalloy IN-738LC, J. Mater. Eng. Perform., 2016, 25(4), p 1269–1275. (in English)CrossRef

C. Zhang, L.W. Zhang, W.F. Shen, C.R. Liu, and Y.N. Xia, The Kinetics of Metadynamic Recrystallization in a Ni-Cr-Mo-Based Superalloy Hastelloy C-276, J. Mater. Eng. Perform., 2016, 25(2), p 545–552. (in English)CrossRef

D.D. Gu, M.J. Xia, and D.H. Dai, On the Role of Powder Flow Behavior in Fluid Thermodynamics and Laser Processability of Ni-Based Composites by Selective Laser Melting, Int. J. Mach. Tool Manuf., 2019, 137, p 67–78. (in English)CrossRef

L. Zheng, R. Schlesiger, R. Chellali, D. Baither, and G. Schmitz, Investigation on the relationship Between Intermediate Temperature Embrittlement and Intergranular Precipitate in Ni (Bi) Alloy, Mater. Design, 2012, 34, p 155–158. (in English)CrossRef

H.L. Liu, N. Ta, M. Xu, Y. Meng, G.H. Xu, and L. Zheng, Recrystallization and Associated Twinning Evolution in Nickel-Based GH4141 Superalloy During Annealing, J. Mater. Eng. Perform., 2020, 29(12), p 7940–7951. (in English)CrossRef

L. Zheng, M.C. Zhang, R. Chellali, H. Bouchikhaoui, and J.X. Dong, Oxidation Property of Powder Metallurgy EP741NP Ni Based Superalloy at Elevated Temperatures, Mater. Technol., 2013, 28(3), p 122–128. (in English)CrossRef

D.M. Collins and H.J. Stone, A Modelling Approach to Yield Strength Optimisation in a Nickel-Base Superalloy, Int. J. Plasticity, 2014, 54, p 96–112. (in English)CrossRef

Q.H. Fang, L. Li, J. Li, H.Y. Wu, Z.W. Huang, B. Liu, Y. Liu, and P.K. Liaw, A Statistical Theory of Probability-Dependent Precipitation Strengthening in Metals and Alloys, J. Mech. Phys. Solids, 2019, 122, p 177–189. (in English)CrossRef

C. Joseph, C. Persson, and M.H. Colliander, Influence of Heat Treatment on the Microstructure and Tensile Properties of Ni-Base Superalloy Haynes 282, Mater. Sci. Eng. A, 2017, 679, p 520–530. (in English)CrossRef

10.

L. Gong, B. Chen, L. Zhang, Y.C. Ma, and K. Liu, Effect of Cooling Rate on Microstructure, Microsegregation and Mechanical Properties of Cast Ni-Based Superalloy K417G, J. Mater. Sci. Technol., 2018, 34(5), p 811–820. (in English)CrossRef

11.

Z.P. Wan, L.X. Hu, Y. Sun, T. Wang, Z. Li, and Y. Zhang, Effect of Solution Treatment on Microstructure and Tensile Properties of a U720LI Ni-Based Superalloy, Vacuum, 2018, 156, p 248–255. (in English)CrossRef

12.

L. Zhang, D. Li, X.H. Qu, M.L. Qin, X.B. He, and Z. Li, Microstructure and Tensile Properties Optimization of MIM418 Superalloy by Heat Treatment, J. Mater. Process. Tech., 2016, 227, p 71–79. (in English)CrossRef

13.

H.W. Zhang, X.Z. Qin, X.W. Li, and L.Z. Zhou, Effect of Minor Additions on the Microstructures and Stress Rupture properties of a Directionally Solidified Ni-Based Superalloy, Mater. Sci. Eng. A, 2018, 711, p 303–312. (in English)CrossRef

14.

T. Krol, D. Baither, and E. Nembach, The Formation of Precipitate free Zones Along Grain Boundaries in a Superalloy and the Ensuing Effects on its Plastic Deformation, Acta Mater., 2004, 52(7), p 2095–2108. (in English)CrossRef

15.

T. Krol, D. Baither, and E. Nembach, Quantification of the Detrimental Effects of Precipitate Free Zones on the Yield Strength of a Superalloy, Scr. Mater., 2003, 48(8), p 1189–1194. (in English)CrossRef

16.

S.G. Tian, N. Tian, H.C. Yu, X.L. Meng, and Y. Li, Influence of Solution Temperature on Microstructure and Creep Property of a Directional Solidified Nickel-Based Superalloy at Intermediate Temperatures, Mater. Sci. Eng. A, 2014, 615, p 469–480. (in English)CrossRef

17.

S.A. Sajjadi, H.R. Elahifar, and H. Farhangi, Effects of Cooling Rate on the Microstructure and Mechanical Properties of the Ni-Base Superalloy UDIMET 500, J. Alloys Compd., 2008, 455(1–2), p 215–220. (in English)CrossRef

18.

M. Donachie, A. Pinkowish, W. Danesi, J. Radavich, and W. Couts, Effect of Hot Work on the Properties of Waspaloy, Metall. Trans., 1970, 1(9), p 2623–2630. (in English)CrossRef

19.

M.C. Zhang, Q. Zhang, and K. Wei, The correlation Between Grain Orientation Evolution and Stress Rupture Properties of Waspaloy, Metall. Mater. Trans. A, 2018, 49(12), p 6063–6074. (in English)CrossRef

20.

S.F. Toh and W.M. Rainforth, Fatigue of a Nickel Base Superalloy with Bimodal Grain Size, Mater. Sci. Tech., 1996, 12(12), p 1007–1014. (in English)CrossRef

21.

K. Song and M. Aindow, Grain Growth and Particle Pinning in a Model Ni-Based Superalloy, Mater. Sci. Eng. A, 2008, 479(1–2), p 365–372. (in English)CrossRef

22.

R. Polvorosa, A. Suárez, L.L. de Lacalle, I. Cerrillo, A. Wretland, and F. Veiga, Tool Wear on Nickel Alloys with Different Coolant Pressures: Comparison of Alloy 718 and Waspaloy, J. Manuf. Process., 2017, 26, p 44–56. (in English)CrossRef

23.

S.F. Miller, A.J. Shih, and P.J. Blau, Microstructural Alterations Associated with Friction Drilling of Steel, Aluminum, and Titanium, J. Mater. Eng. Perform., 2005, 14(5), p 647–653. (in English)CrossRef

24.

J. Datsko, L. Hartwig, and B. McClory, On the Tensile Strength and Hardness Relation for Metals, J. Mater. Eng. Perform., 2001, 10(6), p 718–722. (in English)CrossRef

25.

X. An, B. Zhang, C. Chu, L. Zhou, and P.K. Chu, Evolution of Microstructures and Properties of the GH4169 Superalloy During Short-Term and High-Temperature Processing, Mater. Sci. Eng. A, 2019, 744, p 255–266. (in English)CrossRef

26.

P. Kontis, A. Kostka, D. Raabe, and B. Gault, Influence of Composition and Precipitation Evolution on Damage at Grain Boundaries in a Crept Polycrystalline Ni-Based Superalloy, Acta Mater., 2019, 166, p 158–167. (in English)CrossRef

27.

J. Andersson, G. Sjöberg, L. Viskari, and M. Chaturvedi, Effects of Different Solution Heat Treatments on the Hot Ductility of Superalloys: Part 3–Waspaloy, Mater. Sci. Tech., 2013, 29(1), p 43–53. (in English)CrossRef

28.

W. Rehrer, D. Muzyka, and G. Heydt, Solution Treatment and Al + Ti Effects on the Structure and Tensile Properties of Waspaloy, JOM, 1970, 22(2), p 32–38. (in English)CrossRef

29.

A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, and S. Yue, Mechanical Property and Microstructure of Linear Friction Welded Waspaloy, Metall. Mater. Trans. A, 2011, 42(3), p 729–744. (in English)CrossRef

30.

S. Olovsjö, A. Wretland, and G. Sjöberg, The Effect of Grain Size and Hardness of Waspaloy on the Wear of Cemented Carbide Tools, Int. J. Adv. Manuf. Tech., 2010, 50(9), p 907–915. (in English)CrossRef

31.

P.J. Bocchini, C.K. Sudbrack, R.D. Noebe, and D.N. Seidman, Temporal Evolution of a Model Co-Al-W superalloy Aged at 650 and 750° C, Acta Mater., 2018, 159, p 197–208. (in English)CrossRef

32.

G. He, F. Liu, L. Huang, and L. Jiang, Analysis of Forging Cracks during Hot Compression of Powder Metallurgy Nickel-Based Superalloy on Simulation and Experiment, Adv. Eng. Mater., 2016, 18(10), p 1823–1832. (in English)CrossRef

33.

H.L. Liu, M.C. Zhang, M. Xu, Y. Meng, G.H. Xu, N. Ta, and L. Zheng, Microstructure evolution dependence of work-hardening characteristic in cold deformation of a difficult-to-deform nickel-based superalloy, Mater. Sci. Eng. A, 2021, 800, p 140280. (in English)CrossRef

34.

X. Zhou, H. Fu, F. Xue, Y. Zhang, and J. Xie, Abnormal Precipitation of the μ Phase During Solution Treatment of γ′-Strengthened Co-Ni-Al-W-Based Superalloys, Scr. Mater., 2020, 181, p 30–34. (in English)CrossRef

35.

A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, and S. Yue, Analysis of Integrity and Microstructure of Linear Friction Welded Waspaloy, Mater. Charact., 2015, 104, p 149–161. (in English)CrossRef

36.

Z.H. Gong, Y.Y. Ma, H.S. Bao, and G. Yang, Effect of W on Formation and Properties of Precipitates in Ni-based Superalloys, J. Iron Steel Res. Int., 2021, 28(7), p 910–919. (in English)CrossRef

37.

A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, and S. Yue, Evolution of Flow Stress and Microstructure During Isothermal Compression of Waspaloy, Mater. Sci. Eng. A, 2014, 615, p 497–510. (in English)CrossRef

38.

M. Jackson and R. Reed, Heat Treatment of UDIMET 720Li: The Effect of Microstructure on Properties, Mater. Sci. Eng. A, 1999, 259(1), p 85–97. (in English)CrossRef

39.

H.S. Liu, L. Zhang, X.B. He, X.H. Qu, and G.Q. Zhang, The Precipitation Behavior of Secondary γ′ Phase in Superalloy FGH96 During Aging Treatment, High Temp. Mater. Process., 2014, 33(5), p 485–488. (in English)CrossRef

40.

L.Z. He, Q. Zheng, X.F. Sun, H.R. Guan, Z.Q. Hu, A.K. Tieu, C. Lu, and H.T. Zhu, Effect of Heat Treatment on Microstructures and Tensile Properties of Ni-Base Superalloy M963, Mater. Sci. Eng. A, 2005, 398(1–2), p 128–136. (in English)CrossRef

41.

T. Osada, Y. Gu, N. Nagashima, Y. Yuan, T. Yokokawa, and H. Harada, Optimum Microstructure Combination for Maximizing Tensile Strength in a Polycrystalline Superalloy with a Two-Phase Structure, Acta Mater., 2013, 61(5), p 1820–1829. (in English)CrossRef

42.

M. Zhang, F. Li, Z. Yuan, J. Li, and S. Wang, Effect of Heat Treatment on the Micro-Indentation Behavior of Powder Metallurgy Nickel Based Superalloy FGH96, Mater. Design, 2013, 49, p 705–715. (in English)CrossRef

43.

H. Zhang, A. Wang, Z. Wen, Z. Yue, and C. Zhang, Effects of Hot Isostatic Pressing (HIP) on Microstructure and Mechanical Properties of K403 Nickel-Based Superalloy, High Temp. Mater. Process., 2016, 35(5), p 463–471. (in English)CrossRef

Title: Inhomogeneous Planar Distribution of γ′ Precipitates in Waspaloy Caused by Local Spatial Consumption of MC Carbides
Authors: Hongliang Liu
Xin Zhao
Jian Dong
Lei Zheng
Publication date: 13-09-2021
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 2/2022
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-06238-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2022

Effect of Pre-corrosion on the Fatigue Failure of Additive Manufactured AlSi10Mg Alloy

An Investigation on the Microstructure, Interface, and Mechanical Properties of Spark Plasma Sintered Ni/Ni-Ni3Al/Ni Compound

Dynamic Recrystallization and Phase-Specific Corrosion Performance in a Super Duplex Stainless Steel

Investigation into Coating Structure and Wear Environment Effects on Tribological Properties of Piston Ring Coated with Monolayer TiAlN and Multilayer TiN/TiAlN

Impact of Carbon Fiber Reinforcement on Mechanical and Tribological Behavior of 3D-Printed Polyethylene Terephthalate Glycol Polymer Composites—An Experimental Investigation

Hot Deformation Behavior and Processing Map of Cu-Cr-Nb-Zr Alloy

Premium Partners