Top

Mechanics of Composite Materials

Published in:

31-10-2023

Interlaminar Shear Strength Behavior of Carbon Fiber Reinforced Aluminum Alloy Laminate

Authors: Zijing Qu, Yibo Li, Minghui Huang, Lei Dong

Published in: Mechanics of Composite Materials | Issue 5/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The interlayer bonding ability is a crucial indicator of thermoplastic fiber metal laminates (FMLs). Using different preparation strategies and adhesive thicknesses, a series of fiber metal laminates were prepared from 2024-T3 Al alloy, unidirectional carbon fiber prepreg tapes, and films of polyether ether ketone. The span-thickness ratio for this type of laminates was examined and characterized to identify the most suitable span-thickness ratio. The effects of adhesive layer thickness on the interlaminar properties of FMLs were investigated, and the failure processes were analyzed by microscopic observation. The results show that lower span-thickness ratios have better applicability in thermoplastic carbon fiber aluminum alloy laminates. The adhesive layer presence significantly affects interlaminar properties independent of its thickness, and the FMLs with unidirectional alignment and anodized treatment possess stronger shear resistance.

previous article Shear Buckling Mode and Failure of Flat Fiber-Reinforced Specimens Under Axial Compression 1. Refined Nonlinear Mathematical Deformation Model

next article The Continual Mechanics of Frontally Growing Objects. Theory

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

M. A. Karatas and H. Gokkaya, “A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials,” Defence Technology, 14, No. 4, 318-326 (2018).CrossRef

K. Kavitha, R. Vijayan, and T. Sathishkumar, “Fibre-metal laminates: A review of reinforcement and formability characteristics,” Materials Today: Proceedings, 22, 601-605 (2020).

T. Sinmazcelik, E. Avcu, M. O. Bora, and O. Coban, “A review: Fibre metal laminates, background, bonding types and applied test methods,” Materials & Design, 32, No. 7, 3671-3685 (2011).CrossRef

A. N. Ashong, M. Lee, S.-T. Hong, Y. S. Lee, and J. H. Kim, “Refill friction stir spot welding of dissimilar AA6014 Al alloy and carbon-fiber-reinforced polymer composite,” Metals and Mater. Int., 27, No. 4, 639-649 (2021).CrossRef

A. Marx, A. Schmid, T. Haubold, L. Pursche, P. Schiebel, and A. Herrmann, “Influence of the aluminum die casting process on PEEK layered CFRP in the manufacturing of a hybrid connection,” IOP Conf. series. Mater. Sci. and Eng., 1147, No. 1, 12018 (2021).

T. Trzepiecinski, S. M. Najm, M. Sbayti, H. Belhadjsalah, M. Szpunar, and H. G. Lemu, “New advances and future possibilities in forming technology of hybrid metal-polymer composites used in aerospace applications,” J. Compos. Sci., 5, No. 8 (2021).

Y. Lu, Y. Li, Y. Zhang, and L. Dong, “Manufacture of Al/CF/PEEK curved beams by hot stamping forming process,” Mater. and Manufac. Processes, 37, No. 14, 1597-1609 (2022).CrossRef

J.-H. Sim, Y. Ha, M.-K. Kim, M.-J. Kim, and Y.-R. Cho, “Investigation on delamination characteristics of 2-ply clad metals and adhesive joints for aluminum/stainless steel via the peel test,” Metals and Mater. Int., 28, No. 2, 361-369 (2022).CrossRef

Ostapiuk, M., M. V. Loureiro, J. Bienias and A. C. Marques, “Interlaminar shear strength study of Mg and carbon fiber-based hybrid laminates with self-healing microcapsules,” Composite Structures 255 (2021).

10.

C. Zopp, A. Dittes, D. Nestler, I. Scharf, L. Kroll, and T. Lampke “Quasi-static and fatigue bending behavior of a continuous fiber-reinforced thermoplastic/metal laminate,” Compos., Part B, 174 (2019).

11.

K. Jin, S. Xuan, J. Tao, and Y. Chen, “The Synergistic effect of temperature and loading rate on deformation for thermoplastic fiber metal laminates,” Materials, 14, No. 15, 4210 (2021).

12.

C. Bellini, V. Di Cocco, F. Iacoviello, and L. Sorrentino, “Performance evaluation of CFRP/Al fibre metal laminates with different structural characteristics,” Compos. Struct., 225 (2019).

13.

T. Trzepiecinski, A. Kubit, R. Kudelski, P. Kwolek, and A. Obtloj, “Strength properties of aluminium/glass-fiberreinforced laminate with additional epoxy adhesive film interlayer,” Int. J. Adhes. and Adhes., 85, 29-36 (2018).CrossRef

14.

H. Li, Y. Hu, X. Fu, X. Zheng, H. Liu, and J. Tao, “Effect of adhesive quantity on failure behavior and mechanical properties of fiber metal laminates based on the aluminum-lithium alloy,” Compos. Struct., 152, 687-692 (2016).CrossRef

15.

S. Yang, W. Xu, L. Liang, T. Wang, and Y. Wei, “An experimental study on the dependence of the strength of adhesively bonded joints with thickness and mechanical properties of the adhesives,” J. Adhes. Sci. and Technol., 28, No. 11, 1055-1071 (2014).CrossRef

16.

Q. Luo and L. Tong, “Analytical solutions for nonlinear analysis of composite single-lap adhesive joints,” Int. J. Adhes. and Adhes., 29, No. 2, 144-154 (2009).CrossRef

17.

Y. Lin, C. Liu, H. Li, K. Jin, and J. Tao, “Interlaminar failure behavior of GLARE laminates under double beam fivepoint-bending load,” Compos. Struct., 201, 79-85 (2018).CrossRef

18.

D. H. Pahr, F. G. Rammerstorfer, P. Rosenkranz, K. Humer, and H. W. Weber, “A study of short-beam-shear and doublelap-shear specimens of glass fabric/epoxy composites,” Compos., Part B, 33, No. 2, 125-132 (2002).CrossRef

19.

M. Gao, P. Gao, Y. Wang, T. Lei, and C. Ouyang, “Study on metallurgically prepared copper-coated carbon fibers reinforced aluminum matrix composites,” Metals and Mater. Int., 27, No. 12, 5425-5435 (2021).CrossRef

20.

H. G. Kotik and J. E. Perez Ipina, “Short-beam shear fatigue behavior of fiber metal laminate (Glare),” Int. J. Fatigue, 95, 236-242 (2017).

21.

F. Bahari-Sambran, J. Meuchelboeck, E. Kazemi-Khasragh, R. Eslami-Farsani, and S. A. Chirani, “The effect of surface modified nanoclay on the interfacial and mechanical properties of basalt fiber metal laminates,” Thin-Walled Struct., 144 (2019).

22.

Y. Chen, K. Jin, H. Li, Y. Lin, Y. Lu, X. Hua, Q. Yuan, H. Wang, and J. Tao, “Effect of peer ply and cooling rate on the tensile properties of Al/Gf/PP laminate prepared by hot pressing,” J. Sandwich Struct. & Mater., 22, No 8, 2567-2581 (2020).CrossRef

23.

R. K. Gupta, A. Mahato, and A. Bhattacharya, “Damage analysis of carbon fiber reinforced aluminum laminate under short beam and single edge notch beam bend test,” Int. J. Mech. Sci., 198, 106393 (2021).CrossRef

24.

C. Liu, D. Du, H. Li, Y. Hu, Y. Xu, J. Tian, G. Tao, and J. Tao, “Interlaminar failure behavior of GLARE laminates under short-beam three-point-bending load,” Compos., Part B, 97, 361-367 (2016).CrossRef

25.

A. C. M. Q. S. Santos, F. M. Monticeli, H. Ornaghi, Jr., L. F. d. P. Santos, and M. O. H. Cioffi, “Porosity characterization and respective influence on short-beam strength of advanced composite processed by resin transfer molding and compression molding,” Polymers & Polymer Compos., 29, No. 8, 1353-1362 (2021).

26.

K. Geng, W. Yang, J. Mo, H. Liu, F. Wei, Z. Ma, Y. Zhao, and A. Inoue, “Plastic Deformation Mechanism of Ductile Fe50Ni30P13C7 Metallic Glass,” Metals and Mater. Int., 25, No. 2, 487-498 (2019).CrossRef

27.

Y. Hu, Y. Zhang, X. Fu, G. Hao, and W. Jiang, “Mechanical properties of Ti/CF/PMR polyimide fiber metal laminates with various layup configurations,” Compos. Struct., 229 (2019).

28.

H. Cui, S. Koussios, Y. Li, and A. Beukers, “Measurement of adhesive shear properties by short beam shear test based on higher order beam theory,” Int. J. Adhes. and Adhes. 40, 19-30 (2013).CrossRef

29.

J. Zhang, V. S. Chevali, H. Wang, and C.-H. Wang, “Current status of carbon fibre and carbon fibre composites recycling,” Compos., Part B, 193 (2020).

Title: Interlaminar Shear Strength Behavior of Carbon Fiber Reinforced Aluminum Alloy Laminate
Authors: Zijing Qu
Yibo Li
Minghui Huang
Lei Dong
Publication date: 31-10-2023
Publisher: Springer US
Published in: Mechanics of Composite Materials / Issue 5/2023
Print ISSN: 0191-5665
Electronic ISSN: 1573-8922
DOI: https://doi.org/10.1007/s11029-023-10141-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5/2023

An Experimental Study on Residual Stresses and the Evaluation of Performance of Polymer Composite Materials

Compression Behavior of a Wood-Based Triangular Prism-Type Lattice Sandwich Structure

Free Vibration Analysis of Composite Sandwich Beams Reinforced by Functionally Graded Graphene Nanoplatelets

The Continual Mechanics of Frontally Growing Objects. Theory

Numerical Study on the Impact Resistance of a Composite Engine Hood

Investigation of the Mechanical Properties of Novel Functional Intralayer Hybrid Composites

Premium Partners