Top

Journal of Materials Engineering and Performance

Published in:

22-09-2021

Microstructure and Properties of Modified Layer on the 65Mn Steel Surface by Pulse Detonation-Plasma Technology

Authors: Jiuming Yu, Haitao Zhou, Linwei Zhang, Lei Lu, Deping Lu

Published in: Journal of Materials Engineering and Performance | Issue 2/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The modified layers were prepared on the 65Mn steel surface by pulse detonation-plasma technology (PDT) treatment. The effects of PDT on the morphology, phase structure, microhardness, and crystallographic orientation of 65Mn steel were studied. The modified layer with uniform thickness, compact structure and high hardness can be formed on the surface of 65Mn steel after PDT treatment. It was found that the grains are refined in modified layer, the residual austenite is formed with different physical processes, and the element of electrode is implanted into the surface to cause microalloying effects. Moreover, the microhardness and the wear resistance of the modified layer improve with increasing of treatment pulse. The maximum microhardness of modified layer is up to 794.9HV, and the wear resistance can be improved to be 2.1 times that of the substrate, which might due to grain refinement, dislocation increase and impact hardening. The possible mechanisms of the changes of microstructure and properties in modified layer after PDT treatment were discussed in this paper.

previous article Acoustic Emission during Press-Brake Bending of SS 304L Sheets and its Correlation with Residual Stress Distribution after Bending

next article Enhancement in Anti-Corrosive Behavior of Ni-P Coatings by Incorporation of Carbon Nanotubes

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Yu.G. Chabak, V.I. Fedun, T.V. Pastukhova et al., Modification of Steel Surface by Pulsed Plasma Heating [J], Probl. Atom. Sci. Technol., 2017, 110(4), p 97–102.

S. Romankov, A. Mamaeva, S.D. Kaloshkin et al., Pulsed Plasma Treatment of Ti-Al Coatings Produced by Mechanical Alloying Method [J], Mater. Lett., 2007, 61(30), p 5288–5291. https://doi.org/10.1016/j.matlet.2007.04.055CrossRef

A.N. Bandura, O.V. Byrka, V.V. Chebotarev et al., Alloying and Modification of Structural Materials under Pulsed Plasma Treatment [J], Int. J. Plasma Environ. Sci. Technol., 2011, 5(1), p 2–6.

Yu.G. Chabak, V.I. Fedun, T.V. Pastukhova et al., Phase-structural Composition of Coating Obtained by Pulsed Plasma Treatment Using Eroded Cathode of T1 High Speed Steel[J], Probl. Atom. Sci. Technol., 2016, 102(4), p 102–106.

K.A. Yushchenko, Y.S. Borisov, Y.N. Tyurin et al., Theory and Practice of Plasma Detonation Modification of the Surface of Machine and Tool Components[J], Weld. Int., 1995, 9(1), p 56–58. https://doi.org/10.1080/09507119509548754CrossRef

A.D. Pogrebnjak and Y.N. Tyurin, Modification of Material Properties and Coating Deposition Using Plasma Jets [J], Phys. Usp., 2005, 48(5), p 487–514. https://doi.org/10.1070/PU2005v048n05ABEH002055CrossRef

Y.N. Tyurin, S.N. Kul, O.V. Kolisnichenko et al., Improving the Wear Resistance of Hard-alloy Rolling Disks by Pulsed-plasma Treatment [J], Steel in, Translation, 2009, 39(10), p 948–951. https://doi.org/10.3103/S0967091209100283CrossRef

S.N. Bratushka, Y. Tyurin, O.V. Kolisnichenko et al., Structure and Tribological Characteristics of Steel Under Melting by Plasma Flow and Simultaneous Mo and W Alloying [J], J. Frict. Wear, 2012, 33(1), p 22–33. https://doi.org/10.3103/S1068366612010047CrossRef

H.Y. Wang, Y.F. Zhao, X.J. Xu et al., Effects of Heat Treatment on Microstructure and Properties of Boriding Layer on 65Mn Steel [J], Trans. Mater. Heat Treat., 2012, 33(12), p 142–146. https://doi.org/10.13289/j.issn.1009-6264.2012.12.027CrossRef

10.

A. Li, Hu. Mengjuan et al., Microstructure and Properties of 65Mn Steel After Austenite Inverse Phase Transformation by Sub-temperature Quenching [J], Adv. Mater. Res., 2011, 194–196, p 89–94.

11.

X.M. Yuan, H.Y. Wang, Y.F. Zhao et al., Process Design of Strengthening and Toughening Treatment for 65Mn Steel by Powder RE-Boronizing Method under Low Temperature [J], Adv. Mater. Res., 2014, 941–944, p 1414–1419. CrossRef

12.

C. Dong, J. Zhang, J. Xu et al., Microstructures and Properties of Electrical Discharge Strengthened Layers on 65Mn Steel [J], Appl. Surf. Sci., 2011, 257(7), p 2843–2849. https://doi.org/10.1016/j.apsusc.2010.10.078CrossRef

13.

H.L. Wang, Y.J. Shen, Q.D. Li et al., Effect of Laser Hardening Process Parameters on Hardened Layer Depth of 65Mn Steel [J], Trans. Mater. Heat Treat., 2015, 36(9), p 213–218. https://doi.org/10.13289/j.issn.1009-6264.2015.09.037CrossRef

14.

J.M. Luo, Y.H. Chen, J.L. Xu et al., Effect of Plasma-pulses Detonation Treatment on Microstructure and Properties of the Ti-6Al-4V Surface [J], Surf. Coat. Technol., 2019, 366, p 164–169. https://doi.org/10.1016/j.surfcoat.2019.03.033CrossRef

15.

L.I. Markashova, Y.N. Tyurin, O.V. Kolisnichenko et al., Influence of Structure Parameters of Mechanical Properties of R6M5 Steel Under the Conditions of Strengthening Surface Treatment [J], Paton Weld. J., 2013, 12, p 16–21.

16.

M.A. Li, Influence of Pretreatment Process on Microstructure and Properties of 65Mn Steel after Subcritical Quenching [J], Appl. Mech. Mater., 2013, 310, p 55–58. CrossRef

17.

Z.H. Zheng, W.L. Zhang, D.X. Zhu et al., Inverse Heat Conduction Ananlysis of Surface Heat Transfer Coefficients for Typical Steels During Quenching with Phase Transformation [J], Trans. Mater. Heat Treat., 2010, 31(5), p 143–146. https://doi.org/10.1016/S1876-3804(11)60008-6CrossRef

18.

F. Landry and P. Schaaf, Laser Nitriding of Iron: Influence of the Spatial Laser Intensity Distribution [J], Appl. Surf. Sci., 1999, 138, p 266–270. CrossRef

19.

Y. Ivanov, W. Matz, V. Rotshtein et al., Pulsed Electron-beam Melting of High-speed Steel: Structural Phase Transformations and Wear Resistance [J], Surf. Coat. Technol., 2002, 150(2–3), p 188–198. https://doi.org/10.1016/S0257-8972(01)01542-0CrossRef

20.

G. Stahli and C.H. Sturzenegger, On the Formation of Austentic Boundary Layers by Short Laser-pulse Reaction with Steel[J], Scr. Metall., 1978, 12(7), p 617–622. https://doi.org/10.1016/0036-9748(78)90273-9CrossRef

21.

C.A. Apple and G. Krauss, The Effect of Heating Rate on the Martensite to Austenite Transformation in Fe-Ni-C Alloys [J], Acta Metall., 1972, 20(7), p 849–856. https://doi.org/10.1016/0001-6160(72)90077-6CrossRef

22.

Y.B. Xu, Y. Zou et al., Correlation Between Deformation Behavior and Austenite Characteristics in a Mn-Al Type TRIP Steel [J], Mater. Sci. Eng., A, 2017, 698, p 126–135. https://doi.org/10.1016/j.msea.2017.05.058CrossRef

23.

W.J. Kaluba, R. Taillard and J. Foct, The Bainitic Mechanism of Austenite Formation During Rapid Heating [J], Acta Mateialia, 1998, 46(16), p 5917–5927. https://doi.org/10.1016/S1359-6454(98)00210-9CrossRef

24.

A.N. Valyaev, V.S. Ladysev, D.R. Mendygaliev et al., Defects in α-Fe Induces by Intense- Pulsed Ion Beam (IPIB) [J], Nucl. Instrum. Methods Phys. Res. B, 2000, 171(4), p 481–486. https://doi.org/10.1016/S0168-583X(00)00294-9CrossRef

25.

G.E. Remnev, I.F. Isakov, M.S. Opekounov et al., High Intensity Pulsed Ion Beam Sources and Their Industrial Applications [J], Surf. Coat. Technol., 1999, 114(2/3), p 206–212. https://doi.org/10.1016/S0257-8972(99)00058-4CrossRef

26.

X. Jin, B.Q. Fu, C.L. Zhang and W. Liu, Evolution of the Texture and Mechanical Properties of 2060 Alloy During Bending [J], Int. J. Miner. Metall. Mater., 2015, 22, p 966–971. https://doi.org/10.1007/s12613-015-1156-1CrossRef

27.

A.T. Lim, D.J. Srolovitz, M. Haataja et al., Low-angle Grain Boundary Migration in the Presence of Eatrinsic Dislocations [J], Acta Mater., 2009, 57(17), p 5013–5022. https://doi.org/10.1016/j.actamat.2009.07.003CrossRef

28.

Y.S. Borisov, O.V. Kolisnichenko et al., Effect of Plasma-detonation Treatment of Surface on Thermal State and Phase Composition of Modified Layers of Steel U8 [J], Sci. Tech., 2003, 4, p 22–25.

29.

A. Ludwig, B. Pustal and D.M. Herlach, General Concept for a Stability Analysis of a Planar Interface Under Rapid Solidification Conditions in Multi-component Alloy Systems [J], Mater. Sci. Eng., A, 2001, 304–306, p 277–280. https://doi.org/10.1016/S0921-5093(00)01451-9CrossRef

30.

S. Takaki, Reversion of Deformation Induced Materials to Austenite and Mechanism of Ultra Grain Refining [J], Tetsu- to- Hagane, 2010, 80(12), p 529–535. https://doi.org/10.1117/12.463751CrossRef

31.

Xu. Cao Yupeng, F.A. Ying et al., Experimental study of residual stress formation mechanism of 7050 aluminum alloy sheet by laser shock processing [J], Chin. J. Lasers, 2016, 43(7), p 1–8. https://doi.org/10.3788/CJL201643.0702008CrossRef

32.

A. Leyland and A. Matthews, On the Significance of the H/E Ratio in Wear Control: A Nanocomposite Coating to Optimized Tribological Behavior [J], Wear, 2000, 246(1–2), p 1–11. https://doi.org/10.1016/S0043-1648(00)00488-9CrossRef

Title: Microstructure and Properties of Modified Layer on the 65Mn Steel Surface by Pulse Detonation-Plasma Technology
Authors: Jiuming Yu
Haitao Zhou
Linwei Zhang
Lei Lu
Deping Lu
Publication date: 22-09-2021
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 2/2022
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-06258-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2022

Effect of Annealing Treatment on the Microstructure and Hardness of AlxCoCrFeNi (x = 0.75, 1.25) High Entropy Alloys

Bending Fatigue Life Prediction Model of Carburized Gear Based on Microcosmic Fatigue Failure Mechanism

Effect of Aluminum Content on the Tribological Properties of AlxCrTiMo Refractory High-Entropy Alloys

Tribological Behavior and Corrosion Resistance of S30432 Steel after Different Shot Peening Processes

Reducing Anisotropy in High Yttria Ferritic Oxide Dispersion Strengthened Steels by Powder Forging

Microstructure and Mechanical Properties of Laser Welded Al-Si Coated 22MnB5 Hot Stamping Steel and Galvanized Steel

Premium Partners