Top

Journal of Materials Engineering and Performance

Published in:

01-02-2018

Microstructures, Martensitic Transformation, and Mechanical Behavior of Rapidly Solidified Ti-Ni-Hf and Ti-Ni-Si Shape Memory Alloys

Authors: X. L. Han, K. K. Song, L. M. Zhang, H. Xing, B. Sarac, F. Spieckermann, T. Maity, M. Mühlbacher, L. Wang, I. Kaban, J. Eckert

Published in: Journal of Materials Engineering and Performance | Issue 3/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this work, the microstructure and mechanical properties of rapidly solidified Ti_50−x/2Ni_50−x/2Hf_x (x = 0, 2, 4, 6, 8, 10, and 12 at.%) and Ti_50−y/2Ni_50−y/2Si_y (y = 1, 2, 3, 5, 7, and 10 at.%) shape memory alloys (SMAs) were investigated. The sequence of the phase formation and transformations in dependence on the chemical composition is established. Rapidly solidified Ti-Ni-Hf or Ti-Ni-Si SMAs are found to show relatively high yield strength and large ductility for specific Hf or Si concentrations, which is due to the gradual disappearance of the phase transformation from austenite to twinned martensite and the predominance of the phase transformation from twinned martensite to detwinned martensite during deformation as well as to the refinement of dendrites and the precipitation of brittle intermetallic compounds.

previous article Al2O3-TiC Composite Prepared by Spark Plasma Sintering Process: Evaluation of Mechanical and Tribological Properties

next article Determination of Strain Rate Sensitivity of Micro-struts Manufactured Using the Selective Laser Melting Method

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

G. Welsch, R. Boyer, and E.W. Collings, Ed., Materials Properties Handbook: Titanium Alloys, ASM International, USA, 1994

J. Mohd Jani, M. Leary, A. Subic, and M.A. Gibson, A Review of Shape Memory Alloy Research, Applications and Opportunities, Mater. Des., 2014, 56, p 1078–1113CrossRef

K. Otsuka and X. Ren, Physical Metallurgy of Ti-Ni-Based Shape Memory Alloys, Prog. Mater Sci., 2005, 50, p 511–678CrossRef

K. Otsuka and X. Ren, Recent Developments in the Research of Shape Memory Alloys, Intermetallics, 1999, 7, p 511–528CrossRef

Q. Sun, R. Matsui, K. Takeda, and E.A. Pieczyska, Ed., Advances in Shape Memory Materials, Springer, Cham, 2017

S. Miyazaki and K. Otsuka, Deformation and Transition Behavior Associated with the R-Phase in Ti-Ni Alloys, Metall. Trans. A, 1986, 17A, p 53–63CrossRef

J. Frenzel, J. Pfetzing, K. Neuking, and G. Eggeler, On the Influence of Thermomechanical Treatments on the Microstructure and Phase Transformation Behavior of Ni-Ti-Fe Shape Memory Alloys, Mater. Sci. Eng. A, 2008, 481-482, p 635–638CrossRef

M. Nishida, C.M. Wayman, and T. Honma, Phase Transformations in a Ti₅₀Ni_47.5Fe_2.5 Shape Memory Alloy, Metallography, 1986, 19, p 99–113CrossRef

S.F. Hsieh and S.K. Wu, A Study on a Ti₅₂Ni₄₇Al₁ Shape Memory Alloy, J. Mater. Sci., 1999, 34, p 1659–1665CrossRef

10.

S.F. Hsieh and S.K. Wu, A Study on the Nickel-Rich Ternary Ti-Ni-Al Shape Memory Alloys, J. Mater. Sci., 1997, 32, p 989–996CrossRef

11.

T.H. Nam, T. Saburi, and Y. Kawamura, Shape Memory Characteristics Associated with the \({\text{B}}2 \rightleftharpoons {\text{B}}19\) and \({\text{B19}} \rightleftharpoons {\text{B}}19^{\prime }\) Transformations in a Ti-40Ni-10Cu (at.%) Alloy, Mater. Trans., 1990, 31, p 262–269CrossRef

12.

T.H. Nam, T. Saburi, and K.I. Shimizu, Cu-Content Dependence of Shape Memory Characteristics in Ti-Ni-Cu Alloys, Mater. Trans., 1990, 31, p 959–967CrossRef

13.

A.S. Paulas, J.P.H.G. Canejo, R.M.S. Martins, and F.M. Braz, Fernandes, Effect of Thermal Cycling on the Transformation Temperatures of Ti-Ni Alloys, Mater. Sci. Eng. A, 2004, 378, p 92–96CrossRef

14.

X.L. Meng, W. Cai, F. Chen, and L.C. Zhao, Effect of Aging on Martensitic Transformation and Microstructure in Ni-Rich TiNiHf Shape Memory Alloy, Scr. Mater., 2006, 54, p 1599–1604CrossRef

15.

S.F. Hsieh and S.K. Wu, Room-Temperature Phases Observed in Ti_53−xNi₄₇Zr_x High-Temperature Shape Memory Alloys, J. Alloys Compd., 1998, 266, p 276–282CrossRef

16.

S. Han, W. Zou, S. Jin, Z. Zhang, and D. Yang, The Studies of the Martensite Transformations in a Ti_36.5Ni_48.5Hf₁₅ Alloy, Scr. Metall. Mater., 1995, 32, p 1441–1446CrossRef

17.

S.F. Hsieh and S.K. Wu, A Study on Ternary Ti-Rich TiNiZr Shape Memory Alloys, Mater. Charact., 1998, 41, p 151–162CrossRef

18.

S. Sanjabi, Y.Z. Cao, and Z.H. Barber, Multi-Target Sputter Deposition of Ni₅₀Ti_50−xHf_x Shape Memory Thin Films for High Temperature Microactuator Application, Sens. Actuat. A Phys., 2005, 121, p 543–548CrossRef

19.

Y.X. Tong, P.C. Jiang, F. Chen, B. Tian, L. Li, Y.F. Zheng, D.V. Gunderov, and R.Z. Valiev, Microstructure and Martensitic Transformation of an Ultrafine-Grained TiNiNb Shape Memory Alloy Processed by Equal Channel Angular Pressing, Intermetallics, 2014, 49, p 81–86CrossRef

20.

S.S. Leu, Y.C. Chen, and R.D. Jean, Effect of Rapid Solidification on Mechanical Properties of Cu-Al-Ni Shape Memory Alloys, J. Mater. Sci., 1992, 27, p 2792–2798CrossRef

21.

G.A. Lara-Rodriguez, G. Gonzalez, H. Flores-Zúñiga, and J. Cortés-Pérez, The Effect of Rapid Solidification and Grain Size on the Transformation Temperatures of Cu-Al-Be Melt Spun Alloys, Mater. Charact., 2006, 57, p 154–159CrossRef

22.

K.P. Gupta, The Hf-Ni-Ti (Hafnium-Nickel-Titanium) System, J. Phase Equilib., 2001, 22, p 69–72CrossRef

23.

A. Sibirev, S. Belyaev, and N. Resnina, Unusual Multistage Martensitic Transformation in TiNi Shape Memory Alloy After Thermal Cycling, Mater. Sci. Forum, 2013, 738, p 372–376CrossRef

24.

T.H. Nam, J.H. Kim, M.S. Choi, Y.W. Kim, H.J. Im, J.S. Ahn, and T. Mitani, R Phase Transformation in Equiatomic TiNi Alloy Ribbons Fabricated by Rapid Solidification, J. Mater. Sci. Lett., 2002, 21, p 685–688CrossRef

25.

Y. Tong, F. Chen, B. Tian, L. Li, and Y. Zheng, Microstructure and Martensitic Transformation of Ti₄₉Ni_51−xHf_x High Temperature Shape Memory Alloys, Mater. Lett., 2009, 63, p 1869–1871CrossRef

26.

R. Nagarajan and K. Chattopadhyay, Intermetallic Ti₂Ni/TiNi Nanocomposite by Rapid Solidification, Acta Metall. Mater., 1994, 42, p 947–958CrossRef

27.

W.A. Elliott, F.P. Gagliano, and G. Krauss, Rapid Cooling by Laser Melt Quenching, Appl. Phys. Lett., 1972, 21, p 23–25CrossRef

28.

J. Khalil-Allafi, G. Eggeler, W.W. Schmahl, and D. Sheptyakov, Quantitative Phase Analysis in Microstructures Which Display Multiple Step Martensitic Transformations in Ni-Rich NiTi Shape Memory Alloys, Mater. Sci. Eng. A, 2006, 438, p 593–596CrossRef

29.

J. Khalil-Allafi, G. Eggeler, A. Dlouhy, W.W. Schmahl, and C. Somsen, On the Influence of Heterogeneous Precipitation on Martensitic Transformations in a Ni-Rich NiTi Shape Memory Alloy, Mater. Sci. Eng. A, 2004, 378, p 148–151CrossRef

30.

K. Otsuka and C.M. Wayman, Ed., Shape Memory Materials, Cambridge University Press, Cambridge, 1998

31.

S. Miyazaki, Y. Igo, and K. Otsuka, Effect of Thermal Cycling on the Transformation Temperatures of Ti-Ni Alloys, Acta Metall., 1986, 34, p 2045–2051CrossRef

32.

J. Perkins and W. Muesing, Martensitic Transformation Cycling Effects in Cu-Zn-Al Shape Memory Alloys, Metall. Mater. Trans. A, 1983, 14, p 33–36CrossRef

33.

J.C. Li and G. Ansell, The Effect of Thermal Cycling on the Thermoelastic Martensitic Transformation in a Cu-Zn-Al Alloy, Metall. Mater. Trans. A, 1983, 14, p 1293–1297CrossRef

34.

F. Frank, On Spontaneous Asymmetric Synthesis, Biochim. Biophys. Acta, 1953, 11, p 459–463CrossRef

35.

R.C. Pond, S. Celotto, and J.P. Hirth, A Comparison of the Phenomenological Theory of Martensitic Transformations with a Model Based on Interfacial Defects, Acta Mater., 2003, 51, p 5385–5398CrossRef

36.

P. McCormick and Y. Liu, Thermodynamic Analysis of the Martensitic Transformation in NiTi-II. Effect of Transformation Cycling, Acta Metall. Mater., 1994, 42, p 2407–2413CrossRef

37.

J. Olbricht, A. Yawny, A.M. Condó, F.C. Lovey, and G. Eggeler, The Influence of Temperature on the Evolution of Functional Properties During Pseudoelastic Cycling of Ultra Fine Grained NiTi, Mater. Sci. Eng. A, 2008, 481, p 142–145CrossRef

38.

S. Miyazaki, T. Imai, Y. Igo, and K. Otsuka, Effect of Cyclic Deformation on the Pseudoelasticity Characteristics of Ti-Ni Alloys, Metall. Trans. A, 1986, 17, p 115–120CrossRef

39.

P.L. Potapov, A.V. Shelyakov, A.A. Gulyaev, E.L. Svistunova, N.M. Matveeva, and D. Hodgson, Effect of Hf on the Structure of Ni-Ti Martensitic Alloy, Mater. Lett., 1997, 32, p 247–250CrossRef

40.

V.G. Pushin, N.N. Kuranova, A.V. Pushin, A.N. Uksusnikov, and N.I. Kourov, Structure and Thermoelastic Martensitic Transformations in Ternary Ni-Ti-Hf Alloys with a High-Temperature Shape Memory Effect, Tech. Phys., 2016, 61, p 1009–1014CrossRef

41.

J.H. Kim, M.S. Choi, and T.H. Nam, Phase Transformation Behavior and Shape Memory Characteristics of Ti-Ni-Si Alloys, Met. Mater. Int., 2001, 7, p 207–212CrossRef

42.

S.F. Hsieh, S.K. Wu, and H.C. Lin, Transformation Temperatures and Second Phases in Ti-Ni-Si Ternary Shape, J. Alloys Compd., 2002, 339, p 162–166CrossRef

43.

K.M. Ibrahim, N. Elbagoury, and Y. Fouad, Microstructure and Martensitic Transformation of Cast TiNiSi Shape Memory Alloys, J. Alloys Compd., 2011, 509, p 3913–3916CrossRef

44.

M. Zarinejad and Y. Liu, Dependence of Transformation Temperatures of NiTi-Based Shape-Memory Alloys on the Number and Concentration of Valence Electrons, Adv. Funct. Mater., 2008, 18, p 2789–2794CrossRef

45.

G. Jakob, T. Eichhorn, M. Kallmayer, and H.J. Elmers, Correlation of Electronic Structure and Martensitic Transition in Epitaxial Ni₂MnGa Films, Phys. Rev. B, 2007, 76, p 174407CrossRef

46.

J.J. Gilman, R.W. Cumberland, and R.B. Kaner, Design of Hard Crystals, Int. J. Refract. Met. Hard Mater., 2006, 24, p 1–5CrossRef

47.

J. Gilman, Electronic Basis of the Strength of Materials, 1st ed., Cambridge University Press, Cambridge, 2003

48.

E.M. Mazzer, P. Gargarella, C.S. Kiminami, C. Bolfarini, R.D. Cava, and M. Galano, On the Valence Electron Theory to Estimate the Transformation Temperatures of Cu-Al-Based Shape Memory Alloys, J. Mater. Res., 2017, 32, p 1–10CrossRef

49.

T. Fukuda, T. Saburi, K. Doi, and S. Nenno, Nucleation and Self-Accommmodation of the R-Phase in Ti-Ni Alloys, Mater. Trans., 1992, 33, p 271–277CrossRef

Title: Microstructures, Martensitic Transformation, and Mechanical Behavior of Rapidly Solidified Ti-Ni-Hf and Ti-Ni-Si Shape Memory Alloys
Authors: X. L. Han
K. K. Song
L. M. Zhang
H. Xing
B. Sarac
F. Spieckermann
T. Maity
M. Mühlbacher
L. Wang
I. Kaban
J. Eckert
Publication date: 01-02-2018
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 3/2018
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-018-3209-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2018

High Cycle Fatigue Performance in Laser Shock Peened TC4 Titanium Alloys Subjected to Foreign Object Damage

Effect of Post-deformation Annealing Treatment on the Microstructural Evolution of a Cold-Worked Corrosion-Resistant Superalloy (CRSA) Steel

Evolution of Dynamic Recrystallization in 35CrMo Steel During Hot Deformation

Evaluations of Silica Aerogel-Based Flexible Blanket as Passive Thermal Control Element for Spacecraft Applications

Controlled High Filler Loading of Functionalized Al2O3-Filled Epoxy Composites for LED Thermal Management

Weldability and Impact Energy Properties of High-Hardness Armor Steel

Premium Partners