Issue 8-10/2005
Content (87 Articles)
JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment, Yokohama, 2003
Y. Mitsuya, Mike Suk
A method for calculating the electromagnetic noise of a motor-driven thin blade fan
H. Ota, T. Sato, C. Baup, J. Okamoto, M. Nagai, K. Nagahashi
Basic study on filtering using the frequency characteristics of reflected waves from underground radar
Yoshikazu Sudo, Yoshihiko Nomura, Yuji Nagashima
A quick intelligent control system for a mobile robot to avoid collision with moving obstacles
Weihong Yang, Keiichi Watanuki, Shen Zhao
A basic study of a face-to-face image presentation system
Masatoshi Ohnishi, Yoshihiko Nomura, Norihiko Kato, Satoshi Takahama
Development of an optical stylus displacement sensor for surface profiling instruments
Hiroya Fukatsu, Kazuhisa Yanagi
Antenna stabilizing control system using a strapdown 2-axis Azimuth/Elevation method
Takao Murakoshi
A piezoelectric micro-actuator with extended base-plate for HDD
Gih Keong Lau, Hejun Du
Finite element method analysis and control of micro actuator with piezoelectric element for spinstand
Akihiro Naganawa, Shigeki Mori, Hirohiko Tada, Yotsugi Shibuya, Goro Obinata, Kazuhiro Ouchi
Integrated fabrication of electrostatic microactuator for HDD R/W head positioning
J. Chen, Y. Lu, J. P. Yang
An iterative learning approach to compensation for the servo track writing error in high track density disk drives
Chang-Ik Kang, Chang-Hwan Kim
An adaptive notch filter for suppressing mechanical resonance in high track density disk drives
Chang-Ik Kang, Chang-Hwan Kim
Suppressing sensitivity hump in HDD dual-stage servo systems
Chee Khiang Pang, Daowei Wu, Guoxiao Guo, Tow Chong Chong, Youyi Wang
Realization of an adaptive voltage driver for voice coil motor
Roberto Oboe, Riccardo Antonello, Paolo Capretta
A design based on final-state control for residual vibrationless seeking in hard disk drives
Atsushi Okuyama, Masahito Kobayashi, Takao Horiguchi, Kazuhisa Shishida
Servo design for high-TPI computer disk drives using a delay-accommodating state estimator
Young-Hoon Kim, Sang-Hoon Chu, Seong-Woo Kang
A pivot nonlinearity compensation by use of variable structure estimator for hard disk drives
Keitaro Ohno, Roberto Horowitz
Optimal design of smart carriage arm in magnetic disk drive for vibration suppression
Fumitake Ohashi, Itsuro Kajiwara, Motoko Iwadare, Toshihiro Arisaka
Linear actuator for precise track following
Shigeki Mori, Takayuki Hoshino, Hirohiko Tada, Goro Obinata, Kazuhiro Ouchi
Position error reduction in magnetic disk drives using a head gimbal assembly with radial head motion capability
Dong-Ho Oh, Seong-Woo Kang
Stability analysis of a disk-spindle supported by a plain journal bearing and pivot bearing
Kyosuke Ono, Seiji Murashita, Hiroshi Yamaura
Aerodynamically induced power loss in hard disk drives
Sung-Oug Cho, Seung-Yop Lee, Yoon-Chul Rhim
Pawl latch mechanism design and control for load/unload technology
J. Chang, R. Monajemy, T. Pham, D. Baral, Y. Byun
Performances of journal bearing with MoS2-shot coating for spindle of magnetic recording storage system
Tomoko Hirayama, Noriaki Hishida, Hisashi Ishida, Hiroshi Yabe
Improvement of dynamic characteristics of a HDD spindle system supported by ball bearing at elevated temperature
G. H. Jang, D. K. Kim, C. S. Kim, H. S. Lee
Finite element modal analysis of a spinning flexible disk-spindle system in a HDD considering the flexibility of complicated supporting structure
G. H. Jang, J. H. Han
Experimental studies and simulation for air flow on rotating drum in helical scan system
Kenji Hasegawa, Yoshiaki Mizoh
Optimizing servo-signal design for a hard-disk drives
Kyo Akagi, Kei Yasuna, Kazuhisa Shishida
Robust design of a microactuator for HDD head positioning
W. H. Jia, J. P. Yang, M. A. Jabbar
Numerical simulation of slider air bearings based on a mesh-free method for HDD applications
Xuhong Li, Hejun Du, Bo Liu, Gih Keong Lau
Flying characteristics in the free molecular region (influence of accommodation coefficients)
Shigehisa Fukui, Hidekazu Shimada, Kiyomi Yamane, Hiroshige Matsuoka
Dynamic characteristics of flying head slider with ultra thin spacing (CIP method and linearized method)
Shigehisa Fukui, Hidetoshi Matsui, Kiyomi Yamane, Hiroshige Matsuoka
Simulation of a pad slider flying on a wavy surface
Zhisheng Deng, Yoshihiro Ueno, Tatsuhiko Inagaki
Corrected expression of the van der Waals pressure for multilayered system with application to analyses of static characteristics of flying head sliders with an ultrasmall spacing
H. Matsuoka, S. Ohkubo, S. Fukui
Friction control by micro-vibration of a magnetic recording head under micro-load
Lizhi Su, Junguo Xu, Masayuki Kurita, Koji Kato, Koshi Adachi
Active-head sliders using piezoelectric thin films for flying height control
Kenji Suzuki, Takayuki Akimatsu, Kenji Sasaki, Masayuki Kurita
Mechanical stability of the interface between a padded slider and magnetic recording disk
Richard Martin, Brian Strom
Effect of mechanical design of the suspension on dynamic loading process
M. Suk, D. Gillis
Slider vibration reduction using slider surface texture
Lin Zhou, Michael Beck, Hans H. Gatzen, Kenneth J. Altshuler, Frank E. Talke
Interactions between nano-spacing flying head sliders and ultra-thin liquid lubricant films with non-uniform distribution in hard disk drives
Norio Tagawa, Noritaka Yoshioka, Atsunobu Mori
Theoretical analysis of evaporation and re-adsorption of PFPE molecules on hard disk surface
Bo Zhang, Akira Nakajima
The dynamic behavior of ultrathin lubricant films
Yiao-Tee Hsia, Qian Guo, Satoru Izumisawa, Myung S. Jhon
Evaluation of ultraviolet assisted bonding between lubricant and diamond-like carbon through spreading of molecularly thin perfluoropolyether lubricant
Y. Mitsuya, Y. Hayashi, K. Goto, H. Zhang, K. Fukuzawa
Optimization of dynamic shear force measurement for fiber wobbling method
S. Itoh, K. Fukuzawa, K. Takahashi, T. Ando, H. Zhang, Y. Mitsuya
Quantitative study of magnetic tape abrasivity using accelerated wear testing
Patrick Chou, Michael Lamers
Examination of flying height of magnetic head slider in simulations and measurements at nanometer-order spacing
Yoshinori Takeuchi, Katsuyuki Tanaka, Toshiko Odaka, Fumitaka Muranushi
Pin-on-disk wear study on thin-film disks for contact recording systems
S. Kobatake, S. Nakazawa, K. Nagata, S. Miyazawa, Y. Kawakubo
FEM analysis of multilayered MEMS device under thermal and residual stress
Jun-Hyub Park, Hyeon-Chang Choi
Mental tasks discrimination by neural networks with wavelet transform
Choi Kyoung Ho, Minoru Sasaki
Piezo micro probe sensor system to detect environmental stresses induced in living cells and tissues
Tadashi Kosawada, Ken-ichi Konno, Shingo Yamamura, Toshikatsu Kanazawa
Nanotechnology advances and applications in information storage
Jia-Yang Juang, David B. Bogy
Vibration-based automatic power-generation system
Ken Sasaki, Yuji Osaki, Jun Okazaki, Hiroshi Hosaka, Kiyoshi Itao
Motion error correction for non-contact ultrasonic motor driven by multi-layered piezoelectric actuators
Hiromi Isobe, Akira Kyusojin
Selective and in-situ determination of carbonate and oxide particles in aqueous solution using laser-induced breakdown spectroscopy (LIBS) for wearable information equipment
Hiroyasu Hotokezaka, Noboru Aoyagi, Yasuhiro Kawahara, Noriko U. Yamaguchi, Shinya Nagasaki, Ken Sasaki, Satoru Tanaka
Modified photo-sensors for grating-image type micro-encoder
Y. Kanamori, R. Kamata, M. Mitamura, Y. Ito, K. Hane
Fabrication of a rotary micromirror for fiber-optic switching
M. Hu, H. Du, S. Ling, B. Liu, G. Lau
Dynamic characteristic of miniature molding pantograph mechanisms for surface mount systems
Yuki Ishii, Thomas Thümmel, Mikio Horie
Development of a micromanipulator made of diamond having reversal mechanism
Yuichi Nakazato, Akiyoshi Sekine, Hajime Miyazawa, Sadao Takeuchi, Yukinori Ariga, Masao Murakawa
Design of servo control systems with quadratic optimal control and observed-state feedback control for mems-based storage device
Hongjun Jeon, Dirk Grunwald
Design and manufacturing of micromechanism elements of 2-DOF micromanipulator
Daiki Kamiya, Taketo Gozu, Mikio Horie
Intra-body data transmission for the personal area network
Keisuke Hachisuka, Teruhito Takeda, Yusuke Terauchi, Ken Sasaki, Hiroshi Hosaka, Kiyoshi Itao
Development of a wrist-worn calorie monitoring system using bluetooth
Chika Sugimoto, Hartaman Ariesanto, Hiroshi Hosaka, Ken Sasaki, Noriyoshi Yamauchi, Kiyoshi Itao
Automatic classification of ambulatory movements and evaluation of energy consumptions utilizing accelerometers and a barometer
Yasuaki Ohtaki, Mitsutoshi Susumago, Akihiro Suzuki, Koichi Sagawa, Ryoichi Nagatomi, Hikaru Inooka
Design of optical path of pickup for small form factor optical disk drive
K.-S. Jung, H.-M. Kim, S.-J. Lee, N.-C. Park, S.-I. Kang, Y.-P. Park
Design of wafer-based NA 0.85 micro objective lens and integrated pick up module for small sized optical drive
Y.-S. Kim, S.-J. Lee, N.-C. Park, Y.-P. Park
Effect of thermal deformations of an optical pick-up base on the optical properties of DVD optical system
Hongmin Kim, Sunghoon Cho, Shinill Kang
A new direct Seek Control Design of Optical Disk Drives
Fengdan Dong, Youyi Wang, Jianying Zhou
Development of an optical flying head for a next-generation magneto-optical recording system
Goroh Kawasaki, Tsuyoshi Matsumoto, Nobuyuki Kanto, Koichi Tezuka
Design of swing arm type actuator and suspension for micro optical disk drive
E.-J. Hong, D.-W. Kim, N.-C. Park, H.-S. Yang, Y.-P. Park, S.-K. Kim
Contact force detection on a minute aperture mounted optical contact slider using an acoustic emission sensor
Toshifumi Ohkubo, Kenji Tanaka, Terunao Hirota, Hiroshi Hosaka, Kiyoshi Itao, Yoko Shinohara, Hideo Maeda, Kenji Kato, Yasuyuki Mitsuoka, Kunio Nakajima
Simulation on chemical mechanical polishing using atomic force microscope
Atsushi Miyoshi, Hiroyuki Nakagawa, Koei Matsukawa
Flow resistance of a liquid droplet confined between two hydrophobic surfaces
Kenji Suzuki
On stress singularity at the interface edge between piezoelectric thin film and elastic substrate
F. Shang, T. Kitamura
Membrane microcantilever arrays fabrication with PZT thin films for nanorange movement
Hong Zhu, Jianmin Miao, Bangtao Chen, Zhihong Wang, Weiguang Zhu
Micro-rheometry of pressurized lubricants and micro-nanorheology
Y. Nakamura, Y. Kurosaki
Micro-tribological properties of heat treated hard disk evaluated by force modulation method
Tadashi Saitoh, Shojiro Miyake, Satoshi Matsunuma
Molecular dynamics simulation of ultra-thin liquid bridging between surfaces having two-dimensional roughness
S. Ogata, K. Fukuzawa, Y. Mitsuya, Y. Ohshima
Tape edge wear and its relationship to lateral tape motion
Jason H. Wang, Frank E. Talke
High frequency lateral tape motion and the dynamics of tape edge contact
Ryan J. Taylor, Frank E. Talke