Top

Cellulose

Published in:

07-04-2021 | Original Research

Printability of variative nanocellulose derived papers

Authors: Arif Ozcan, Ayhan Tozluoglu, Emine Arman Kandirmaz, Ahmet Tutus, Hakan Fidan

Published in: Cellulose | Issue 8/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The printability properties of the paper can be increased by some processes applied to the surface. The use of non-recyclable materials derived from petroleum is decreasing day by day, and the demand for recyclable materials obtained from renewable sources is increasing. These materials include cellulose derivatives, starch types and polyvinyl alcohol. The materials ratios, sizes, physical and chemical properties of these materials used in the processes applied to the paper and the content of the paper will affect the strength of the paper as well as change the surface properties and significantly affect the printability. The aim of this study is to obtain better printability properties by improving the paper surface with CNF/CNF-OX coating. In this study, fluting and core board papers coated with different amounts of cellulose nanofiber (CNF)/cellulose nanofiber-oxidized (CNF-OX) were produced. Surface properties, contact angle, surface energy, color and gloss of the produced papers were measured by optical microscope, goniometer, spectrophotometer and glossmeter. The papers were printed with the IGT C1 offset printability tester. As a result, in terms of printability, it was determined that CNF/CNF-OX coated papers have smoother surfaces and give better results in terms of both gloss properties and printability.

Graphic abstract

previous article Thermochromic luminescent fiber based on yellow thermochromic microcapsules: preparation, properties, and potential application areas

next article Fabrication of durable and sustainable superhydrophobic‐superoleophilic paper for efficient oil/water separation

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Afra E, Yousefi H, Lakani SA (2014) Properties of chemi-mechanical pulp filled with nanofibrillated and microcrystalline cellulose. J Biobased Mater 8:489–494. https://doi.org/10.1166/jbmb.2014.1462CrossRef

Afra E, Mohammadnejad S, Saraeyan A (2016) Cellulose nanofibils as coating material and its effects on paper properties. Prog Org Coat 101:455–460. https://doi.org/10.1016/j.porgcoat.2016.09.018CrossRef

Arbatan T, Zhang L, Fang XY, Shen W (2012) Cellulose nanofibers as binder for fabrication of superhydrophobic paper. Chem Eng J 210:74–79. https://doi.org/10.1016/j.cej.2012.08.074CrossRef

Aspler J, Bouchard J, Hamad W, Berry R, Beck S, Drolet F, Zou X (2013) Review of nanocellulosic products and their applications. In: Dufresne A, Thomas S, Pothen LA (eds) Biopolymer nanocomposites: processing, properties, and applications, 1st edn. John Wiley & Sons, New York, pp 461–508CrossRef

Aulin C, Ström G (2013) Multilayered alkyd resin/nanocellulose coatings for use in renewable packaging solutions with a high level of moisture resistance. Ind Eng Chem Res 52:2582–2589. https://doi.org/10.1021/ie301785aCrossRef

Aulin C, Gällstedt M, Lindström T (2010) Oxygen and oil barrier properties of microfibrillated cellulose films and coatings. Cellulose 17:559–574. https://doi.org/10.1007/s10570-009-9393-yCrossRef

Bardet R, Belgacem MN, Bras J (2013) Different strategies for obtaining high opacity films of MFC with TiO₂ pigments. Cellulose 20:3025–3037. https://doi.org/10.1007/s10570-013-0025-1CrossRef

Bayer IS, Fragouli D, Attanasio A, Sorce B, Bertoni G, Brescia R, Corato RD, Pellegrino T, Kalyva M, Sabella S, Pompa PP, Cingolani R, Athanassiou A (2011) Water-repellent cellulose fiber networks with multifunctional properties. ACS Appl Mater Interfaces 3:4024–4031. https://doi.org/10.1021/am200891fCrossRefPubMed

Campano C, Merayo N, Negro C, Blanco Á (2018) Low-fibrillated bacterial cellulose nanofibers as a sustainable additive to enhance recycled paper quality. Int J Biol Macromol 114:1077–1083. https://doi.org/10.1016/j.ijbiomac.2018.03.170CrossRefPubMed

Charani PR, Dehghani-Firouzabadi M, Afra E, Blademo Å, Naderi A, Lindström T (2013) Production of microfibrillated cellulose from unbleached kraft pulp of Kenaf and Scotch Pine and its effect on the properties of hardwood kraft: microfibrillated cellulose paper. Cellulose 20:2559–2567. https://doi.org/10.1007/s10570-013-9998-zCrossRef

Chen P, Yu H, Liu Y, Chen W, Wang X, Ouyang M (2013) Concentration effects on the isolation and dynamic rheological behavior of cellulose nanofibers via ultrasonic processing. Cellulose 20:149–157. https://doi.org/10.1007/s10570-012-9829-7CrossRef

Dimic-Misic K, Puisto A, Gane P, Nieminen K, Alava M, Paltakari J, Maloney T (2013) The role of MFC/NFC swelling in the rheological behavior and dewatering of high consistency furnishes. Cellulose 20:2847–2861. https://doi.org/10.1007/s10570-013-0076-3CrossRef

Dulany MA, Batten GL Jr, Peck MC, Farley CE (2011) Papermaking additives. Kirk-Othmer Encycl Chem Technol. https://doi.org/10.1002/0471238961.1601160504211201.a01.pub2CrossRef

Fillat A, Martínez J, Valls C, Cusola O, Roncero MB, Vidal T, Valenzuela SV, Diaz P, Pastor FJ (2018) Bacterial cellulose for increasing barrier properties of paper products. Cellulose 25:6093–6105. https://doi.org/10.1007/s10570-018-1967-0CrossRef

Gatti A (2005) Risk assessment of micro and nanoparticles and the human health. Handbook of nanostructured biomaterials. American Scientific Publisher

Holik H (2006) Handbook of paper and board. WileyCrossRef

Hult EL, Iotti M, Lenes M (2010) Efficient approach to high barrier packaging using microfibrillar cellulose and shellac. Cellulose 17:575–586. https://doi.org/10.1007/s10570-010-9408-8CrossRef

Karlovits I, Lavrič G, Pleša T, Kavčič U (2018) The influence of MFC and NFC addition in an uncoated paper on flexography optical print quality. Pap Technol Ind 59:14–18

Klass CP (2011) Biobased materials for paper coating. In: Proceedings of the Papercon conference, Covington, KY, USA, pp 2249–2081

Lavoine N, Desloges I, Dufresne A, Bras J (2012) Microfibrillated cellulose—its barrier properties and applications in cellulosic materials: a review. Carbohydr Polym 90:735–764. https://doi.org/10.1016/j.carbpol.2012.05.026CrossRefPubMed

Lavoine N, Desloges I, Khelifi B, Bras J (2014) Impact of different coating processes of microfibrillated cellulose on the mechanical and barrier properties of paper. J Mater Sci 49:2879–2893. https://doi.org/10.1007/s10853-013-7995-0CrossRef

Lavric G, Medvescek D, Skocaj M (2020) Papermaking properties of bacterial nanocellulose produced from mother of vinegar, a waste product after classical vinegar production. Tappi J 19:197–203

Luo MR, Cui G, Rigg B (2001) The development of the CIE 2000 colour‐difference formula: CIEDE2000. In: Color research & application: endorsed by Inter‐Society Color Council, The Colour Group (Great Britain), Canadian Society for Color, Color Science Association of Japan, Dutch Society for the Study of Color, The Swedish Colour Centre Foundation, Colour Society of Australia, Centre Français de la Couleur, vol 26, pp 340–350. https://doi.org/10.1002/col.1049

Martins NCT, Freire CSR, Pinto RJB, Fernandes SCM, Neto CP, Silvestre AJD, Causio J, Baldi G, Sadocco P, Trindade T (2012) Electrostatic assembly of Ag nanoparticles onto nanofibrillated cellulose for antibacterial paper products. Cellulose 19:1425–1436. https://doi.org/10.1007/s10570-012-9713-5CrossRef

Mashkour M, Afra E, Resalati H, Mashkour M (2015) Moderate surface acetylation of nanofibrillated cellulose for the improvement of paper strength and barrier properties. RSC Adv 5:60179–60187. https://doi.org/10.1039/C5RA08161KCrossRef

McCracken A, Sadeghian P (2018) Corrugated cardboard core sandwich beams with bio-based flax fiber composite skins. J Build Eng 20:114–122. https://doi.org/10.1016/j.jobe.2018.07.009CrossRef

Mertaniemi H, Laukkanen A, Teirfolk J-E, Ikkala O, Ras RHA (2012) Functionalized porous microparticles of nanofibrillated cellulose for biomimetic hierarchically structured superhydrophobic surfaces. RSC Adv 2:2882–2886. https://doi.org/10.1039/C2RA00020BCrossRef

Morsy FA, El-Sherbiny S, Samir M, Fouad OA (2016) Application of nanostructured titanium dioxide pigments in paper coating: a comparison between prepared and commercially available ones. J Coat Technol Res 13:307–316. https://doi.org/10.1007/s11998-015-9735-7CrossRef

Nair SS, Zhu JY, Deng Y, Ragauskas AJ (2014) High performance green barriers based on nanocellulose. Sustain Chem Process 2:1–7. https://doi.org/10.1186/s40508-014-0023-0CrossRef

Nunes T, Lourenço AF, Gamelas JA, Ferreira PJ (2015) Cellulose nanofibrils in papermaking—filler retention, wet web resistance and printability. In: Proceedings of the second international conference on natural fibers, pp 27–29

Ozcan A, Kandirmaz EA, Hayta P, Mutlu B (2019) Examination of the effect of melamine as a filler in paper coatings on print quality. Cellul Chem Technol 53:307–313. https://doi.org/10.35812/CelluloseChemTechnol.2019.53.30CrossRef

Ozcan A, Arman Kandirmaz E, Zelzele OB (2020) The effect of deinking and binder type on inkjet print quality. In: Proceedings of the 10th international symposium on graphic engineering and design, GRID2020, Novi Sad, pp 387–394. https://doi.org/10.24867/GRID-2020-p43

Ozcan A, Kasikovic N, Arman Kandirmaz E, Durdevic S, Petrovic S (2020) Highly flame retardant photocured paper coatings and printability behavior. Polym Adv Technol 31:2647–2658. https://doi.org/10.1002/pat.4991CrossRef

Penttilä A, Sievänen J, Torvinen K, Ojanperä K, Ketoja JA (2013) Filler-nanocellulose substrate for printed electronics: experiments and model approach to structure and conductivity. Cellulose 20:1413–1424. https://doi.org/10.1007/s10570-013-9883-9CrossRef

Petroudy SRD, Syverud K, Chinga-Carrasco G, Ghasemain A, Resalati H (2014) Effects of bagasse microfibrillated cellulose and cationic polyacrylamide on key properties of bagasse paper. Carbohydr Polym 99:311–318. https://doi.org/10.1016/j.carbpol.2013.07.073CrossRef

Puceković N, Hooimeijer A, Lozo B (2015) Cellulose nanocrystals coating—a novel paper coating for use in the graphic industry. Acta graphica znanstveni časopis za tiskarstvo i grafičke komunikacije 26:21–26

Rautkoski H, Pajari H, Koskela H, Sneck A, Moilanen P (2015) Use of cellulose nanofibrils (CNF) in coating colors. Nord Pulp Pap Res J 30:511–518. https://doi.org/10.3183/NPPRJ-2015-30-03-p511-518CrossRef

Reshmy R, Philip E, Paul SA, Madhavan A, Sindhu R, Binod P, Pandey A, Sirohi R (2020) Nanocellulose-based products for sustainable applications-recent trends and possibilities. Rev Environ Sci Biotechnol 19:779–806. https://doi.org/10.1007/s11157-020-09551-zCrossRef

Richmond F, Co A, Bousfield D (2012) The coating of nanofibrillated cellulose onto paper using flooded and metered size press methods. In: Paper conference and trade show 2012: growing the future, PaperCon 2012—co-located with control systems 2012, New Orleans, LA, USA

Ridgway CJ, Gane PA (2012) Constructing NFC-pigment composite surface treatment for enhanced paper stiffness and surface properties. Cellulose 19:547–560. https://doi.org/10.1007/s10570-011-9634-8CrossRef

Ridgway CJ, Gane PA (2013) Size-selective absorption and adsorption in anionic pigmented porous coating structures: case study cationic starch polymer versus nanofibrillated cellulose. Cellulose 20:933–951. https://doi.org/10.1007/s10570-013-9878-6CrossRef

Santos SM, Carbajo JM, Gómez N, Ladero M, Villar JC (2017) Paper reinforcing by in situ growth of bacterial cellulose. J Mater Sci 52:5882–5893. https://doi.org/10.1007/s10853-017-0824-0CrossRef

Sharma M, Aguado R, Murtinho D, Valente AJ, De Sousa APM, Ferreira PJ (2020) A review on cationic starch and nanocellulose as paper coating components. Int J Biol Macromol 162:578–598. https://doi.org/10.1016/j.ijbiomac.2020.06.131CrossRefPubMed

Shen J, Qian X (2012) Application of fillers in cellulosic paper by surface filling: an interesting alternative or supplement to wet-end addition. BioResources 7:1385–1388

Shen J, Fatehi P, Ni Y (2014) Biopolymers for surface engineering of paper-based products. Cellulose 21:3145–3160. https://doi.org/10.1007/s10570-014-0380-6CrossRef

Skočaj M (2019) Bacterial nanocellulose in papermaking. Cellulose 26:6477–6488. https://doi.org/10.1007/s10570-019-02566-yCrossRef

Spence KL, Venditti RA, Rojas OJ, Pawlak JJ, Hubbe MA (2011) Water vapor barrier properties of coated and filled microfibrillated cellulose composite films. BioResources 6:4370–4388CrossRef

Syverud K, Stenius P (2009) Strength and barrier properties of MFC films. Cellulose 16:75–85. https://doi.org/10.1007/s10570-008-9244-2CrossRef

Tang Y, Zhou D, Zhang J, Zhu X (2013) Fabrication and properties of paper coatings with the incorporation of nanoparticle pigments: rheological behavior. Dig J Nanomater Biostruct 8:1699–1710

Tang Y, Yang S, Zhang N, Zhang J (2014) Preparation and characterization of nanocrystalline cellulose via low-intensity ultrasonic-assisted sulfuric acid hydrolysis. Cellulose 21:335–346. https://doi.org/10.1007/s10570-013-0158-2CrossRef

Tozluoglu A, Fidan H, Tutuş A, Arslan R, Sertkaya S, Poyraz B, Küçük SD, Sozbir T, Yemsen B, Gucus MO (2021) Reinforcement potential of modified nanofibrillated cellulose in recycled paper production. BioResources 16:911–941

Xiang Z, Jin X, Liu Q, Chen Y, Li J, Lu F (2017) The reinforcement mechanism of bacterial cellulose on paper made from woody and non-woody fiber sources. Cellulose 24:5147–5156. https://doi.org/10.1007/s10570-017-1468-6CrossRef

Title: Printability of variative nanocellulose derived papers
Authors: Arif Ozcan
Ayhan Tozluoglu
Emine Arman Kandirmaz
Ahmet Tutus
Hakan Fidan
Publication date: 07-04-2021
Publisher: Springer Netherlands
Published in: Cellulose / Issue 8/2021
Print ISSN: 0969-0239
Electronic ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-021-03861-3

Springer Professional

Abstract

Graphic abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Other articles of this Issue 8/2021

Nonuniformly modifying high-aspect-ratio rigid cellulose nanocrystals to enhance percolation advantage in weakly compatible biomass polymer systems

Smart flame retardant coating containing carboxymethyl chitosan nanoparticles decorated graphene for obtaining multifunctional textiles

Synergistic benefits for hydrogen production through CO2-cofeeding catalytic pyrolysis of cellulosic biomass waste

Superhydrophobic corn straw as a versatile platform for oil/water separation

Cellulose cryogels prepared by regeneration from phosphoric acid solutions

Swelling and dissolution of cellulose in binary systems of three ionic liquids and three co-solvents