Skip to main content
Top
Published in: Metallurgical and Materials Transactions B 3/2018

23-02-2018

Selective Extraction and Recovery of Nd and Dy from Nd-Fe-B Magnet Scrap by Utilizing Molten MgCl2

Authors: Sakae Shirayama, Toru H. Okabe

Published in: Metallurgical and Materials Transactions B | Issue 3/2018

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Fundamental experiments are conducted with the aim of developing an efficient recycling process for rare earth elements (REEs) from neodymium-iron-boron (Nd-Fe-B) permanent magnet scrap. Molten magnesium dichloride (MgCl2) was chosen as an extraction medium, which can selectively chlorinate and extract REEs in magnet alloys. Dysprosium-containing Nd-Fe-B magnet alloy was immersed in molten MgCl2 at 1273 K (1000 °C) for 3 to 12 hours. The results of the experiments clearly show that the REEs in the magnetic alloy were successfully extracted into the molten salt, while the Fe-B alloy remained in a solid form. The extraction ratios of Nd and Dy were at most 87 and 78 mass pct, respectively. After the extraction experiment, excess MgCl2 and Mg were removed by vacuum distillation and the rare earth chlorides were recovered. Thus, the feasibility of this method for efficient recovery of rare earths using molten MgCl2 is demonstrated.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference M. Sagawa, S. Fujimura, H. Yamamoto, Y. Matsuura, and K. Hiraga: IEEE Trans. on Magnetics, 1984, vol. MAG-20, pp. 1584-1589.CrossRef M. Sagawa, S. Fujimura, H. Yamamoto, Y. Matsuura, and K. Hiraga: IEEE Trans. on Magnetics, 1984, vol. MAG-20, pp. 1584-1589.CrossRef
2.
go back to reference M. Sagawa, M. Hamano, and M. Hirabayashi: ‘EIKYU-JISHAKU’, AGNE Gijutsu Center Inc., Tokyo, 2007. M. Sagawa, M. Hamano, and M. Hirabayashi: ‘EIKYU-JISHAKU’, AGNE Gijutsu Center Inc., Tokyo, 2007.
3.
go back to reference S. Hirosawa, Y. Matsuura, H. Yamamoto, S. Fujimura, and M. Sagawa: J. Appl. Phys., 1986, vol. 59, pp.873-879.CrossRef S. Hirosawa, Y. Matsuura, H. Yamamoto, S. Fujimura, and M. Sagawa: J. Appl. Phys., 1986, vol. 59, pp.873-879.CrossRef
4.
go back to reference K. Machida: Kinzoku, 2004, vol. 74, pp. 3-12. K. Machida: Kinzoku, 2004, vol. 74, pp. 3-12.
5.
go back to reference T.H. Okabe: Kinzoku, 2007, vol. 77, pp. 10-16. T.H. Okabe: Kinzoku, 2007, vol. 77, pp. 10-16.
6.
go back to reference S. Shirayama and T.H. Okabe: Molten Salts, 2009, vol. 52, pp.71-82. S. Shirayama and T.H. Okabe: Molten Salts, 2009, vol. 52, pp.71-82.
7.
go back to reference O. Takeda and T.H. Okabe: Metallur. and Mater. Trans. E, 2014, vol. 1A, pp.160-173. O. Takeda and T.H. Okabe: Metallur. and Mater. Trans. E, 2014, vol. 1A, pp.160-173.
8.
go back to reference Y. Yu, L.S. Chumbley, and F.C. Laabs: J. Mater. Res., 2000, vol. 15, pp. 2296-2304.CrossRef Y. Yu, L.S. Chumbley, and F.C. Laabs: J. Mater. Res., 2000, vol. 15, pp. 2296-2304.CrossRef
9.
go back to reference T.H. Okabe, O. Takeda, K. Fukuda, and Y. Umetsu: Mater. Trans., 2003, vol. 44, pp. 798-801.CrossRef T.H. Okabe, O. Takeda, K. Fukuda, and Y. Umetsu: Mater. Trans., 2003, vol. 44, pp. 798-801.CrossRef
10.
go back to reference O. Takeda, T.H. Okabe, and Y. Umetsu: J. Alloy. Compd., 2005, vol. 392, pp. 206-313.CrossRef O. Takeda, T.H. Okabe, and Y. Umetsu: J. Alloy. Compd., 2005, vol. 392, pp. 206-313.CrossRef
11.
go back to reference O. Takeda, T.H. Okabe, and Y. Umetsu: J. Alloy. Compd., 2006, vol. 408-412, pp. 387-390.CrossRef O. Takeda, T.H. Okabe, and Y. Umetsu: J. Alloy. Compd., 2006, vol. 408-412, pp. 387-390.CrossRef
12.
go back to reference O. Takeda, T.H. Okabe, and Y. Umetsu: J. Alloy. Compd., 2004, vol. 379, pp. 305-313.CrossRef O. Takeda, T.H. Okabe, and Y. Umetsu: J. Alloy. Compd., 2004, vol. 379, pp. 305-313.CrossRef
13.
go back to reference K. Murase, K. Shinozaki, Y. Hirashima, K. Machida, and G. Adachi: J. Alloy. Compd., 1993, vol. 198, pp. 31-38.CrossRef K. Murase, K. Shinozaki, Y. Hirashima, K. Machida, and G. Adachi: J. Alloy. Compd., 1993, vol. 198, pp. 31-38.CrossRef
14.
go back to reference K. Murase, K. Machida, and G. Adachi: J. Alloy. Compd., 1995, vol. 217, pp. 218-215.CrossRef K. Murase, K. Machida, and G. Adachi: J. Alloy. Compd., 1995, vol. 217, pp. 218-215.CrossRef
15.
go back to reference J. Jiang, T. Ozaki, K. Machida, and G. Adachi: J. Alloy. Compd., 1997, vol. 260, pp. 222-235.CrossRef J. Jiang, T. Ozaki, K. Machida, and G. Adachi: J. Alloy. Compd., 1997, vol. 260, pp. 222-235.CrossRef
16.
go back to reference T. Uda, K.T. Jacob, and M. Hirasawa: Science, 2000, vol. 289, pp. 2326-2329.CrossRef T. Uda, K.T. Jacob, and M. Hirasawa: Science, 2000, vol. 289, pp. 2326-2329.CrossRef
17.
go back to reference T. Uda, S. Komarov, and M. Hirasawa: Mater. Trans., 2001, vol. 42, pp. 1813-1819.CrossRef T. Uda, S. Komarov, and M. Hirasawa: Mater. Trans., 2001, vol. 42, pp. 1813-1819.CrossRef
18.
go back to reference T. Saito, H. Sato, S. Ozawa, J. Yu, and T. Motegi: J. Alloy. Compd., 2003, vol. 353, pp. 189-193.CrossRef T. Saito, H. Sato, S. Ozawa, J. Yu, and T. Motegi: J. Alloy. Compd., 2003, vol. 353, pp. 189-193.CrossRef
19.
20.
go back to reference T. Saito, H. Sato, and T. Motegi: J. Alloy. Compd., 2005, vol. 387, pp. 274-278.CrossRef T. Saito, H. Sato, and T. Motegi: J. Alloy. Compd., 2005, vol. 387, pp. 274-278.CrossRef
21.
go back to reference T. Saito, H. Sato, T. Motegi, and K. Kobayashi: J. Alloy. Compd., 2005, vol. 403, pp. 341-344.CrossRef T. Saito, H. Sato, T. Motegi, and K. Kobayashi: J. Alloy. Compd., 2005, vol. 403, pp. 341-344.CrossRef
22.
go back to reference H. Sekimoto, T. Kubo and K. Yamaguchi: J. MMIJ, 2014, vol. 130, pp. 494-500. (in Japanese).CrossRef H. Sekimoto, T. Kubo and K. Yamaguchi: J. MMIJ, 2014, vol. 130, pp. 494-500. (in Japanese).CrossRef
23.
go back to reference T. Oishi, H. Konishi, T. Nohira, M. Tanaka and T. Usui: Kogaku Kagaku Ronbunshu, 2010, vol. 36, pp. 299-303. (in Japanese).CrossRef T. Oishi, H. Konishi, T. Nohira, M. Tanaka and T. Usui: Kogaku Kagaku Ronbunshu, 2010, vol. 36, pp. 299-303. (in Japanese).CrossRef
24.
go back to reference T. Nohira, S. Kobayashi, K. Kobayashi, R. Hagiwara, T. Oishi, and H. Konishi: ECS Trans., 2010, vol. 33, pp. 205-212.CrossRef T. Nohira, S. Kobayashi, K. Kobayashi, R. Hagiwara, T. Oishi, and H. Konishi: ECS Trans., 2010, vol. 33, pp. 205-212.CrossRef
25.
go back to reference S. Kobayashi, K. Kobayashi, T. Nohira, R. Hagiwara, T. Oishi, and H. Konishi: J. the Electrochem. Soc., 2011, vol. 158, pp. E142-E146.CrossRef S. Kobayashi, K. Kobayashi, T. Nohira, R. Hagiwara, T. Oishi, and H. Konishi: J. the Electrochem. Soc., 2011, vol. 158, pp. E142-E146.CrossRef
26.
go back to reference M. Ito, K. Miura, and K. Machida: J. Alloy. Compd., 2009, vol. 477, pp. 484-487.CrossRef M. Ito, K. Miura, and K. Machida: J. Alloy. Compd., 2009, vol. 477, pp. 484-487.CrossRef
28.
go back to reference S. Shirayama, and T.H. Okabe: Proc. MMIJ Annual Meeting. 2008. vol. II, pp. 69-70. S. Shirayama, and T.H. Okabe: Proc. MMIJ Annual Meeting. 2008. vol. II, pp. 69-70.
29.
go back to reference T.H. Okabe, and S. Shirayama: Japanese patent No. 5424352 (2013 Dec 6) (PCT application: PCT/JP2009/056079 (2009 Mar 26)). T.H. Okabe, and S. Shirayama: Japanese patent No. 5424352 (2013 Dec 6) (PCT application: PCT/JP2009/056079 (2009 Mar 26)).
30.
go back to reference I. Barin: Thermochemical Data of Pure Substances, 3rd ed., VCH Verlagsgesellschaft mbH, Weinheim, 1995.CrossRef I. Barin: Thermochemical Data of Pure Substances, 3rd ed., VCH Verlagsgesellschaft mbH, Weinheim, 1995.CrossRef
31.
go back to reference T. Uda, T.H. Okabe, Y. Waseda, and K.T. Jacob: J. Alloys Compd., 1999, vol. 284, pp. 282-288.CrossRef T. Uda, T.H. Okabe, Y. Waseda, and K.T. Jacob: J. Alloys Compd., 1999, vol. 284, pp. 282-288.CrossRef
32.
go back to reference A. Roine: HSC Chemistry ®, ver 6.0, Outokumpu Research Oy, Pori, Finland, 2006. A. Roine: HSC Chemistry ®, ver 6.0, Outokumpu Research Oy, Pori, Finland, 2006.
33.
go back to reference T. Uda, K.T. Jacob, and M. Hirasawa: Science, 2000, vol. 289, pp. 2326-2329.CrossRef T. Uda, K.T. Jacob, and M. Hirasawa: Science, 2000, vol. 289, pp. 2326-2329.CrossRef
Metadata
Title
Selective Extraction and Recovery of Nd and Dy from Nd-Fe-B Magnet Scrap by Utilizing Molten MgCl2
Authors
Sakae Shirayama
Toru H. Okabe
Publication date
23-02-2018
Publisher
Springer US
Published in
Metallurgical and Materials Transactions B / Issue 3/2018
Print ISSN: 1073-5615
Electronic ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-018-1176-0

Other articles of this Issue 3/2018

Metallurgical and Materials Transactions B 3/2018 Go to the issue

Topical Collection: Advances in Materials Manufacturing and Processing

Dependence of Crystallographic Orientation on Pitting Corrosion Behavior of Ni-Fe-Cr Alloy 028

Topical Collection: Advances in Materials Manufacturing and Processing

Analysis of Brazing Effect on Hot Corrosion Behavior of a Nickel-Based Aerospace Superalloy

Premium Partners