Top

Published in:

2018 | OriginalPaper | Chapter

15. Understanding Adhesion

Authors : Daniel MacDonald, Aleksandra Nastic, Bertrand Jodoin

Published in: Cold-Spray Coatings

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Adhesion strength is often cited as the most important characteristic of cold spray coatings, especially in regard to repair applications. The bonded interface between coating and substrate is complex and calls into play many mechanical and chemical facets. Exploring this phenomenon has been of great interest to the scientific community in recent years. Adhesion research can be separated into two streams; one focuses on the mechanism of metallic bonding and the influence that cold spray parameters have on particle deformation, oxide removal, and the resulting particle/substrate interface. The other stream focuses on characterizing the influence of substrate preparation prior to deposition on adhesion. The experimental observations reported in this chapter are often supported with finite element modeling, as the high strain rates and very short impact times in cold spray processing make it difficult to observe local behavior. This chapter aims to summarize the current state of understanding with respect to the different adhesion mechanisms and the physics involved in the bonding process—with the goal of providing concise information that can be applied to the prediction and improvement of cold spray adhesion strength, particularly for structural repairs and coating applications.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter High Temperature Oxidation Performance of Cold Spray Coatings

next chapter Residual Stresses in Cold Spray Coatings

Ajdelsztajn L et al (2005) Cold spray deposition of nanocrystalline aluminum alloys. Metall Mater Trans A 36A:657–662CrossRef

Akbarimousavi A, Alhassani S (2005) Numerical and experimental studies of the mechanism of the wavy interface formations in explosive/impact welding. J Mech Phys Solids 53(11):2501–2528CrossRef

Alkhimov AP (1994) US patent-gas-dynamic spraying method for applying a coating. US5302414 A

Alkhimov AP, Kosarev VF, Klinkov SV (2001) The features of cold spray nozzle design. J Therm Spray Technol 10:375–381CrossRef

Assadi H et al (2003) Bonding mechanism in cold gas spraying. Acta Mater 51(15):4379–4394CrossRef

Assadi H et al (2011) On parameter selection in cold spraying. J Therm Spray Technol 20(6):1161–1176CrossRef

Assadi H et al (2016) Cold spraying – a materials perspective. Acta Mater 116:382–407CrossRef

Bae G et al (2008) General aspects of interface bonding in kinetic sprayed coatings. Acta Mater 56(17):4858–4868CrossRef

Bae G et al (2009) Bonding features and associated mechanisms in kinetic sprayed titanium coatings. Acta Mater 57(19):5654–5666CrossRef

Barradas S et al (2007) Laser shock flier impact simulation of particle-substrate interactions in cold spray. J Therm Spray Technol 16(4):548–556CrossRef

Bolesta AV et al (2001) Investigation of interface boundary occurring during cold gas-dynamic spraying of metallic particles. Nucl Instrum Methods Phys Res, Sect A 470(1–2):249–252CrossRef

Borchers C et al (2004) Microstructural bonding features of cold sprayed face centered cubic metals. J Appl Phys 96(8):4288CrossRef

Branicio PS, Rino JP (2000) Large deformation and amorphization of Ni nanowires under uniaxial strain: a molecular dynamics study. Phys Rev B: Condens Matter Mater Phys 62(24):16950–16955CrossRef

Bray M, Cockburn A, Neill WO (2009) Surface and coatings technology the laser-assisted cold spray process and deposit characterisation. Surf Coat Technol 203(19):2851–2857CrossRef

Burlacov I et al (2007) Cold gas dynamic spraying (CGDS) of TiO 2 (anatase) powders onto poly(sulfone) substrates: microstructural characterisation and photocatalytic efficiency. J Photochem Photobiol A Chem 187:285–292CrossRef

Callister W, Rethwisch D (2008) Materials science and engineering: an introduction, 8th edn. Wiley, Hoboken

Champagne VK et al (2005) Interface material mixing formed by the deposition of copper on aluminum by means of the cold spray process. J Therm Spray Technol 14(3):330–334CrossRef

Christoulis DK et al (2010) Cold-spraying coupled to nano-pulsed Nd-YaG laser surface pre-treatment. J Therm Spray Technol 19(5):1062–1073CrossRef

Cormier Y et al (2015) Finite element analysis and failure mode characterization of pyramidal fin arrays produced by masked cold gas dynamic spray. J Therm Spray Technol 24(8):1549–1565CrossRef

Danlos Y et al (2010) Ablation laser and heating laser combined to cold spraying. Surf Coat Technol 205(4):1055–1059CrossRef

Danlos Y et al (2017) Surface & coatings technology ablation laser and heating laser combined to cold spraying. Surf Coat Technol 205(4):1055–1059CrossRef

Day J, Huang X, Richards NL (2005) Examination of a grit-blasting process for thermal spraying using statistical methods. J Therm Spray Technol 14(4):471–479CrossRef

Dosta S et al (2017) Plastic deformation phenomena during cold spray impact of WC-Co particles onto metal substrates. Acta Mater 124:173–181CrossRef

Drehmann R et al (2014a) Interface characterization and bonding mechanisms of cold gas-sprayed Al coatings on ceramic substrates. J Therm Spray Technol 24(1–2):92–99

Drehmann R et al (2014b) Splat formation and adhesion mechanisms of cold gas-sprayed al coatings on Al2O3 substrates. J Therm Spray Technol 23(1-2):68–75CrossRef

Dykhuizen RC, Smith MF (1998) Gas dynamic principles of cold spray. J Therm Spray Technol 7(June):205–212CrossRef

Fernandez R et al (2016) Enhancement and prediction of adhesion strength of copper cold spray coatings on steel substrates for nuclear fuel repository. J Therm Spray Technol 25(8):1577–1587CrossRef

Fukumoto M et al (2007) Effect of substrate temperature on deposition behavior of copper particles on substrate surfaces in the cold spray process. J Therm Spray Technol 16(5–6):643–650CrossRef

Ganesan A et al (2012) Bonding behavior studies of cold sprayed copper coating on the PVC polymer substrate. Surf Coat Technol 207:262–269CrossRef

Gao H, Liu C, Song FH (2013) Molecular dynamics simulation of the influence factors of particle depositing on surface during cold spray. Adv Mater Mater Processing Pts 1-3:1916–1924

Gärtner F et al (2003) Numerical and microstructural investigations of the bonding mechanisms in cold spraying. In: Prodceedings of the 2003 Thermal Spray Conference “Thermal Spray 2003: advancing the science and applying the technology.”, ITSC 2003. ASM International, Materials Park USA

Ghelichi R et al (2011) Numerical simulation of cold spray coating. Surf Coat Technol 205(23–24):5294–5301CrossRef

Gilmore DL et al (1999) Particle velocity and deposition efficiency in the cold spray process. J Therm Spray Technol 8(December):576–582CrossRef

Goldbaum D et al (2012) The effect of deposition conditions on adhesion strength of Ti and Ti6Al4V cold spray splats. J Therm Spray Technol 21(2):288–303CrossRef

Grujicic M et al (2003) Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process. Appl Surf Sci 219(3–4):211–227CrossRef

Grujicic M et al (2004) Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process. Mater Des 25(8):681–688CrossRef

Guetta S et al (2009) Influence of particle velocity on adhesion of cold-sprayed splats. J Therm Spray Technol 18(3):331–342CrossRef

Hamaker HC (1937) The London—van der Waals attraction between spherical particles. Physica 4(10):1058–1072CrossRef

Harris AF, Beevers A (1999) The effects of grit-blasting on surface properties for adhesion. J Adhes 19(November 1998):445–452

Huang RZ, Fukanuma H (2009) The influence of spray conditions on deposition characteristics of aluminum coatings in cold spraying. Proceeding of the International Thermal Spray Conference:279–284. Available at: http://plasma.co.jp/about/pdf/2009-3.pdf

Huang R, Fukanuma H (2012) Study of the influence of particle velocity on adhesive strength of cold spray deposits. J Therm Spray Technol 21(3–4):541–549CrossRef

Hussain T et al (2009) Bonding mechanisms in cold spraying: the contributions of metallurgical and mechanical components. J Therm Spray Technol 18(3):364–379CrossRef

Ikeda H et al (1999) Strain rate induced amorphization in metallic nanowires. Phys Rev Lett 82(14):2900–2903CrossRef

Irissou E, Arsenault B (2007) Corrosion study of cold sprayed aluminum coatings onto Al 7075 alloy. Coating (January 2007):549–554

Irissou E et al (2007) Investigation of Al-Al 2O 3 cold spray coating formation and properties. J Therm Spray Technol:661–668

Israelachvili JN (1974) The nature of van der Waals forces. Contemp Phys 15(2):159–178CrossRef

Ji G-C et al (2013) Characterization of cold-sprayed multimodal WC-12Co coating. Surf Coat Technol 235:536–543CrossRef

Jodoin B (2002) Cold spray nozzle Mach number limitation. J Therm Spray Technol 11(December):496–507CrossRef

Jodoin B, Raletz F, Vardelle M (2006) Cold spray modeling and validation using an optical diagnostic method. Surf Coat Technol 200(14–15):4424–4432CrossRef

Johnson GR, Cook WH (1983) A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. Proceedings of the 7th International Symposium on Ballistics 547:541–547

Johnson GR, Holmquist TJ (1994) An improved computational constitutive model for brittle materials. AIP Conf Proc J Appl Phys 309(74):1639–1752

Kapoor R, Nemat-Nasser S (1998) Determination of temperature rise during high strain rate deformation. Mech Mater 27(1):1–12CrossRef

Karimi A, Martin JL (1986) Cavitation erosion of materials. Int Mater Rev 31(1):1–26CrossRef

Kim K, Watanabe M, Kuroda S (2009) Jetting-out phenomenon associated with bonding of warm-sprayed titanium particles onto steel substrate. J Therm Spray Technol 18(4):490–499CrossRef

Kim K, Watanabe M, Kuroda S (2010) Bonding mechanisms of thermally softened metallic powder particles and substrates impacted at high velocity. Surf Coat Technol 204(14):2175–2180CrossRef

King PC, Jahedi M (2010) Relationship between particle size and deformation in the cold spray process. Appl Surf Sci 256(6):1735–1738CrossRef

King PC, Zahiri SH, Jahedi M (2008) Focused ion beam micro-dissection of cold-sprayed particles. Acta Mater 56(19):5617–5626CrossRef

King PC et al (2010) An experimental and finite element study of cold spray copper impact onto two aluminum substrates. J Therm Spray Technol 19(3):620–634CrossRef

King PC et al (2013) Embedment of copper particles into polymers by cold spray. Surf Coat Technol 216:60–67CrossRef

King PC et al (2014) Interface melding in cold spray titanium particle impact. Surf Coat Technol 239:191–199CrossRef

Klinkov SV, Kosarev VF (2006) Measurements of cold spray deposition efficiency. J Therm Spray Technol 15(3):364–371CrossRef

Kromer R et al (2016) Laser surface texturing to enhance adhesion bond strength of spray coatings – cold spraying, wire-arc spraying, and atmospheric plasma spraying. Surf Coat Technol. 2017. https://doi.org/10.1016/j.surfcoat.2017.05.007

Kwon EH et al (2005) Particle behavior in supersonic flow during the cold spray process. Met Mater Int 11(5):377–381CrossRef

Lee HY et al (2005) Correlation between Al2O3 particles and interface of Al–Al2O3 coatings by cold spray. Appl Surf Sci 252(5):1891–1898CrossRef

Legoux JG, Irissou E, Moreau C (2007) Effect of substrate temperature on the formation mechanism of cold-sprayed aluminum, zinc and tin coatings. J Therm Spray Technol 16(5–6):619–626CrossRef

Li W-Y, Gao W (2009) Some aspects on 3D numerical modeling of high velocity impact of particles in cold spraying by explicit finite element analysis. Appl Surf Sci 255:7878–7892CrossRef

Li C-J, Li W-Y, Wang Y-Y (2005) Formation of metastable phases in cold-sprayed soft metallic deposit. Surf Coat Technol 198(1–3):469–473CrossRef

Li C-J, Li W-Y, Liao H (2006) Examination of the critical velocity for deposition of particles in cold spraying. J Therm Spray Technol 15(2):212–222CrossRef

Li W-Y, Liao H et al (2007a) Numerical simulation of deformation behavior of Al particles impacting on Al substrate and effect of surface oxide films on interfacial bonding in cold spraying. Appl Surf Sci 253(11):5084–5091CrossRef

Li W-Y, Zhang C et al (2007b) Study on impact fusion at particle interfaces and its effect on coating microstructure in cold spraying. Appl Surf Sci 254(2):517–526CrossRef

Li W-Y et al (2008) Effect of standoff distance on coating deposition characteristics in cold spraying. Mater Des 29(2):297–304CrossRef

Li WY, Yin S, Wang XF (2010) Numerical investigations of the effect of oblique impact on particle deformation in cold spraying by the SPH method. Appl Surf Sci 256(2010):3725–3734CrossRef

Luo X-T et al (2014) High velocity impact induced microstructure evolution during deposition of cold spray coatings: a review. Surf Coat Technol 254:11–20CrossRef

MacDonald D et al (2016) Effect of nozzle material on downstream lateral injection cold spray performance. J Therm Spray Technol 25(6):1149–1157CrossRef

Mäkinen H, Lagerbom J, PV (2007) Adhesion of cold sprayed coatings: effect of powder, substrate, and heat treatment. In: Prodceedings of the 2007 Thermal Spray Conference “Thermal Spray 2007: global coating solutions”, ITSC 2007. ASM International, Materials Park USA

Marrocco T et al (2006) Production of titanium deposits by cold-gas dynamic spray: numerical modeling and experimental characterization. J Therm Spray Technol 15(2):263–272CrossRef

McDonald AG et al (2013) Gas-substrate heat exchange during cold-gas dynamic spraying. J Therm Spray Technol 22(2–3):391–397CrossRef

Mohamed HA, Washburn J (1975) Mechanism of solid state pressure welding. Weld J 54:302–310s

Ning XJ et al (2008) Cold spraying of Al-Sn binary alloy: coating characteristics and particle bonding features. Surf Coat Technol 202(9):1681–1687CrossRef

Ozdemir OC et al (2016) Estimating the effect of helium and nitrogen mixing on deposition efficiency in cold spray. J Therm Spray Technol 25(4):660–671CrossRef

Papyrin A (2001) Cold spray technology. Adv Mater Proc 159(9):49–52

Pattison J et al (2008) Standoff distance and bow shock phenomena in the cold spray process. Surf Coat Technol 202(8):1443–1454CrossRef

Preston DL et al (2003) Model of plastic deformation for extreme loading conditions. J Appl Phys 931(10):1498–1528

Price MC, Kearsley AT, Burchell MJ (2013) Validation of the Preston–Tonks–Wallace strength model at strain rates approaching ∼1011 s−1 for Al-1100, tantalum and copper using hypervelocity impact crater morphologies. Int J Impact Eng 52:1–10CrossRef

Rafaja D et al (2009) Microstructural characterisation of titanium coatings deposited using cold gas spraying on Al 2 O 3 substrates. Surf Coat Technol 203:3206–3213CrossRef

Rahmati S, Ghaei A (2014) The use of particle/substrate material models in simulation of cold-gas dynamic-spray process. J Therm Spray Technol 23(3):530–540CrossRef

Raletz F, Vardelle M, Ezo’o G (2006) Critical particle velocity under cold spray conditions. Surf Coat Technol 201(5):1942–1947CrossRef

Rollot Y, Régnier S, Guinot J-C (1999) Simulation of micro-manipulations: adhesion forces and specific dynamic models. Int J Adhes Adhes 19(1):35–48CrossRef

Samson T et al (2015) Effect of pulsed waterjet surface preparation on the adhesion strength of cold gas dynamic sprayed aluminum coatings. J Therm Spray Technol 24(August):984–993CrossRef

Schmidt T, Gaertner F, Kreye H (2006a) New developments in cold spray based on higher gas and particle temperatures. J Therm Spray Technol 15(December):488–494CrossRef

Schmidt T et al (2006b) Development of a generalized parameter window for cold spray deposition. Acta Mater 54(3):729–742CrossRef

Schmidt T et al (2009) From particle acceleration to impact and bonding in cold spraying. J Therm Spray Technol 18(5–6):794–808CrossRef

Schmidt K et al (2017) Ti surface modification by cold spraying with TiO2 microparticles. Surf Coat Technol 309:749–758CrossRef

Semenov AP (1961) The phenomenon of seizure and its investigation. Wear 4(1):1–9CrossRef

Sharma MM, Eden TJ, Golesich BT (2014) Effect of surface preparation on the microstructure, adhesion, and tensile properties of cold-sprayed aluminum coatings on AA2024 substrates. J Therm Spray Technol 24(3):410–422CrossRef

Stoltenhoff T, Kreye H, Richter HJ (2002) An analysis of the cold spray process and its coatings. J Therm Spray Technol 11(4):542–550CrossRef

Van Steenkiste T, Smith JR (2004) Evaluation of coatings produced via kinetic and cold spray processes. J Therm Spray Technol 13(2):274–282CrossRef

Vijay MM et al (2013) US patent-method and apparatus for prepping surfaces with a high-frequency forced pulsed waterjet. 8,550,873 B2

Villafuerte J (ed) (2015) Modern cold spray. Springer International Publishing, Windsor

Vlcek J et al (2005) A systematic approach to material eligibility for the cold-spray process. J Therm Spray Technol 14(1):125–133CrossRef

Wang Q et al (2010) The influence of ceramic particles on bond strength of cold spray composite coatings on AZ91 alloy substrate. Surf Coat Technol 205:50–56CrossRef

Wang Q et al (2014) High resolution microstructure characterization of the interface between cold sprayed Al coating and Mg alloy substrate. Appl Surf Sci 289:366–369CrossRef

Wank A et al (2006) High-resolution microstructural investigations of interfaces between light metal alloy substrates and cold gas-sprayed coatings. J Therm Spray Technol 15(2):280–283CrossRef

Watanabe Y et al (2014) Influence of substrate temperature on adhesion strength of cold-sprayed coatings. J Therm Spray Technol 24(1–2):86–91

Wigren J (1988) Technical note: grit blasting as surface preparation before plasma spraying. Surf Coat Technol 34(1):101–108CrossRef

Wong W et al (2011) Influence of helium and nitrogen gases on the properties of cold gas dynamic sprayed pure titanium coatings. J Therm Spray Technol 20(1–2):213–226CrossRef

Wu J et al (2006) The bond strength of Al–Si coating on mild steel by kinetic spraying deposition. Appl Surf Sci 252(22):7809–7814CrossRef

Xie Y, Planche MP et al (2016a) Effect of substrate preheating on adhesive strength of SS 316L cold spray coatings. J Therm Spray Technol 25(1–2):123–130CrossRef

Xie Y, Yin S et al (2016b) New insights into the coating/substrate interfacial bonding mechanism in cold spray. Scr Mater 125:1–4CrossRef

Xiong Y et al (2008) Dynamic amorphization and recrystallization of metals in kinetic spray process. Appl Phys Lett 92(19):194101CrossRef

Xiong Y et al (2011) Dependence of bonding mechanisms of cold sprayed coatings on strain-rate-induced non-equilibrium phase transformation. J Therm Spray Technol 20(4):860–865CrossRef

Yamada M et al (2010) Cold spraying of TiO2 photocatalyst coating with nitrogen process gas. J Therm Spray Technol 19(6):1218–1223CrossRef

Yin S et al (2011) Examination on substrate preheating process in cold gas dynamic spraying. J Therm Spray Technol 20(4):852–859CrossRef

Yin S et al (2012) Deformation behavior of the oxide film on the surface of cold sprayed powder particle. Appl Surf Sci 259:294–300CrossRef

Yin S et al (2013) Deposition behavior of thermally softened copper particles in cold spraying. Acta Mater 61(14):5105–5118CrossRef

Yin S et al (2015) Effect of substrate temperature on interfacial bonding for cold spray of Ni onto Cu. J Mater Sci 50(22):7448–7457CrossRef

Zhou XL et al (2011) Preparation of metallic coatings on polymer matrix composites by cold spray. Surf Coat Technol 206(1):132–136CrossRef

Zou Y et al (2009) Dynamic recrystallization in the particle/particle interfacial region of cold-sprayed nickel coating: electron backscatter diffraction characterization. Scr Mater 61:899–902CrossRef

Title: Understanding Adhesion
Authors: Daniel MacDonald
Aleksandra Nastic
Bertrand Jodoin
Publisher: Springer International Publishing
Book: Cold-Spray Coatings
Print ISBN: 978-3-319-67182-6

Electronic ISBN: 978-3-319-67183-3

Copyright Year: 2018
DOI: https://doi.org/10.1007/978-3-319-67183-3_15

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners