Top

Journal of Materials Engineering and Performance

Published in:

01-10-2011

Cyclic Oxidation Behavior of Simulated Post-Weld Heat-Treated P91

Authors: S. Rajendran Pillai, R. K. Dayal

Published in: Journal of Materials Engineering and Performance | Issue 7/2011

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

For long-term service life it is desirable that the high-temperature components posses slow-growing oxide scale. The growth and degradation of the oxide scale on P91 were studied by a thermal cycling method. The oxidation temperature was 780 °C and the duration of each cycle was 2 h. The mass gain and integrity of the scale was examined using a thermogravimetric balance. Any lack of integrity is monitored by the transient mass gain associated with the exposure of fresh surface. The scale retained the integrity throughout 100 cycles. Post-oxidation examination was carried out by scanning electron microscopy, energy dispersive spectroscopy and laser Raman spectroscopy. The nature of the scale was characterized and the reason for the compositional segregation is analyzed.

previous article Study on the Formability and Deformation Behavior of AZ31B Tube at Elevated Temperature by Tube Bulging Test

next article A Simple Relationship Between Axial and Torsional Cyclic Parameters

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

S. Rajendran Pillai and R.K. Dayal, Cyclic Oxidation of P91 by Thermogravimetry and Investigation of the Integrity of the Scale by Transient Mass Gain Method, Oxid. Met., 2008, 69(3–4), p 131–142CrossRef

S. Rajendran Pillai, P. Shankar, and H.S. Khatak, Cyclic Oxidation of P91 at 1073, 1123 and 1173 K, High Temp. Mater. Process., 2004, 23(3), p 196–204

M. Schuetze, Deformation and Cracking Behaviour of Protective Oxide Scale on Heat-Resistant Steels Under Tensile Strain, Oxid. Met., 1985, 24(3/4), p 199–232CrossRef

S. Rajendran Pillai, Life History of Oxide Scales in Metals and Alloys, Corros. Rev., 2005, 23(4–6), p 277–328CrossRef

W.J. Quadakkers and K. Bongartz, The Prediction of Breakaway Oxidation for Alumina Forming ODS Alloys Using Oxidation Diagram, Werkst. Korros., 1994, 45, p 232–241CrossRef

M. Schuetze, Plasticity of Protective Oxide Scale, Mater. Sci. Technol., 1990, 6, p 32–38

R. Hales, The High Temperature Oxidation Behaviour of Austenitic Stainless Steel, Werkst. Korros., 1978, 29, p 393–399CrossRef

D. Monceau and D. Poquillon, Continuous Thermogravimetry Under Cyclic Conditions, Oxid. Met., 2004, 61(1/2), p 143–153CrossRef

R. Peraldi and B. Pint, Effect of Cr and Ni Contents on the Oxidation Behaviour of Ferritic and Austenitic Model Alloys in Air with Water Vapour, Oxid. Met., 2004, 61, p 463–483CrossRef

10.

S. Jianian, Z. Longjiang, and L. Tiefan, High Temperature Oxidation of Fe-Cr Alloy in Wet Oxygen, Oxid. Met., 1997, 48(3/4), p 347–356CrossRef

11.

D. Jeremy Ramsaey, L. Richard, and L. McCreery, Raman Microscopy of Chromate Interactions with Corroding Aluminum Alloy 2024–T3, Corros. Sci., 2004, 46, p 1729–1739CrossRef

12.

D.S. Dunn, M.B. Bogart, C.S. Brossiand, and G.A. Cragnolino, Corrosion of Iron Under Alternate Wet and Dry Conditions, Corrosion, 2000, 56, p 470–488CrossRef

13.

X.J. Wang, H.D. Li, Y.J. Fei, X. Wang, Y.Y. Xiong, Y.X. Nie, and K.A. Feng, XRD and Raman Studies of Vanadium Oxide Thin Films Deposited on Fused Silica Substrate by RF Magnetron Sputtering, Appl. Surf. Sci., 2001, 177, p 8–14CrossRef

14.

T. Onfroy, O.V. Manoilova, S.B. Nukallah, D.M. Hercules, G. Clet, and M. Haoullah, Surface Structure and Catalytic Performance of Niobium Oxide Supported on Titania, Appl. Catal. A, 2007, 316, p 184–190CrossRef

Title: Cyclic Oxidation Behavior of Simulated Post-Weld Heat-Treated P91
Authors: S. Rajendran Pillai
R. K. Dayal
Publication date: 01-10-2011
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 7/2011
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-010-9747-5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7/2011

Preparation and Performance of Ordered Porous TiO2 Film Doped with Gd3+

Optimal Weld Parameters, Weld Microstructure, Mechanical Properties, and Hydrogen Absorption: An Effective Analysis

Effect of Stretch Orientation and Rolling Orientation on the Mechanical Properties of 2195 Al-Cu-Li Alloy

Synthesis of SnFe2O4 Nanomaterials Via High Energy Ball Milling of SnO (Stannous) and α-Fe2O3 (Hematite) Solid Precursors

The Influence of the Preparation Conditions on Initial Permeability of Cu0.5Zn0.5Fe2−x R x O4

Carbon Transfer in Sodium System Under Thermal Cycling-Possibility of “Metal Dusting”

Premium Partners