Top

Journal of Materials Engineering and Performance

Published in:

01-07-2014

Development of Stress-Induced Martensitic Transformation in TiNi Shape Memory Alloy

Authors: Elzbieta Alicja Pieczyska, Maria Staszczak, Vladimir Dunić, Radovan Slavković, Hisaaki Tobushi, Kohei Takeda

Published in: Journal of Materials Engineering and Performance | Issue 7/2014

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

TiNi shape memory alloy (SMA) was subjected to tension at strain-controlled test on quasistatic testing machine. The nucleation, development, and saturation of the stress-induced martensitic transformation were investigated, taking into account the obtained dependency of mechanical parameters and the specimen temperature changes measured by an infrared camera (IR). Three kinds of data obtained by the IR system were analyzed: the temperature distribution on the SMA sample surface, the temperature changes derived as average from the chosen sample area, and the temperature profiles obtained along the sample length. The temperature distribution shows nucleation of the transformation process and a creation of the transformation bands. The average temperature reflects the effects of thermomechanical coupling, accompanying exothermic martensitic forward and endothermic reverse transformation. The temperature profiles revealed the temperature difference between the band and the rest of the sample. The experimental results were supported with finite element method numerical analysis (FEM). The FEM software components for structural and heat transfer problems, coupled in partitioned approach, were used for thermomechanical analysis.

previous article NiTiCu Shape Memory Alloy Characterization Through Microhardness Tests

next article A Comparison of Zero Mean Strain Rotating Beam Fatigue Test Methods for Nitinol Wire

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

K. Yamauchi, I. Ohkata, K. Tsuchya, and S. Miyazaki, Shape Memory and Superelastic Alloys, Woodhead Publishing Limited, Philadelphia, 2011CrossRef

E.A. Pieczyska, S.P. Gadaj, W.K. Nowacki, J. Luckner, and H. Tobushi, Martensite and Reverse Transformation During Simple Shear of NiTi Shape Memory Alloy, Strain, 2009, 45, p 93–100CrossRef

D. Favier, H. Louche, P. Schlosser, L. Orgeas, P. Vacher, and L. Debove, Homogeneous and Heterogeneous Deformation Mechanisms in Austenitic Polycrystalline Ti-50.8 at.%Ni Thin Tube Under Tension. Investigation Via Temperature and Strain Fields Measurements, Acta Mater., 2007, 55, p 5310–5322CrossRef

E.A. Pieczyska, Activity of Stress-Induced Martensite Transformation in Shape Memory Alloy Studied by Infrared Technique, J. Mod. Opt., 2010, 57, p 1700–1707CrossRef

E.A. Pieczyska, H. Tobushi, K. Kulasinski, and K. Takeda, Impact of Strain Rate on Thermomechanical Coupling Effects in TiNi SMA Subjected to Compression, Mater. Trans., 2012, 53, p 1905–1909CrossRef

J.A. Shaw and S. Kyriakides, On the Nucleation and Propagation of Phase Transformation Fronts in a TiNi Alloy, Acta Mater., 1997, 45, p 683–700CrossRef

G. Murasawa, M. Koushinbou, S. Yoneyama, T. Sakuma, and M. Takashi, Measurement of Inhomogeneous Deformation Behavior Arising in SMA, J. Soc. Mater. Sci., 2004, 53, p 999–1005CrossRef

L.C. Brinson, L. Schmidt, and R. Lammering, Stress-Induced Transformation Behavior of a Polycrystalline NiTi Shape Memory Alloy: Micro and Macromechanical Investigation Via in Situ Optical Microscopy, J. Mech. Phys. Solids, 2004, 52, p 1549–1571CrossRef

G. Tan, Y. Liu, P. Sittner, and M. Saunders, Luders-Like Deformation Associated with Stress-Induced Martensite Transformation in TiNi, Scr. Mater., 2004, 50, p 193–198CrossRef

10.

E.A. Pieczyska, H. Tobushi, W.K. Nowacki, S.P. Gadaj, and T. Sakuragi, Subloop Deformation Behavior of TiNi Shape Memory Alloy Subjected to Stress-Controlled Loadings, Mater. Trans., 2007, 48, p 2679–2686CrossRef

11.

S. Daly, G. Ravichandran, and K. Bhattacharya, Stress-Induced Martensitic Phase Transformation in Thin Sheets of Nitinol, Acta Mater., 2007, 55, p 3593–3600CrossRef

12.

H.G. Matthies, R. Niekamp, and J. Steindorf, Algorithms for Strong Coupling Procedures, Comput. Methods Appl. Mech. Eng., 2006, 195(17–18), p 2028–2049CrossRef

13.

M. Kojić, R. Slavković, M. Živković, and N. Grujović, PAK-S: Program for FE Structural Analysis, Faculty of Mechanical Engineering, University of Kragujevac, Kragujevac, 1999

14.

M. Kojić, R. Slavković, M. Živković, and N. Grujović, PAK-T: Program for Heat Transfer Analysis, Faculty of Mechanical Engineering, University of Kragujevac, Kragujevac, 1999

15.

R. Niekamp, CTL Manual for Linux/Unix for the Usage with C++, Institut für Wissenschaftliches Rechnen, TU Braunschweig, Germany, 2005

16.

M. Kojić and K.J. Bathe, Inelastic Analysis of Solids and Structures, Computational Fluid and Solid Mechanics, Springer, Berlin, 2005

17.

J.C. Simo and T.J.R. Hughes, Computational Inelasticity, Interdisciplinary Applied Mathematics: Mechanics and Materials, Springer, Berlin, 1998

18.

D.C. Lagoudas, D. Hartl, Y. Chemisky, L. Machado, and P. Popov, Constitutive Model for the Numerical Analysis of Phase Transformation in Polycrystalline Shape Memory Alloys, Int. J. Plast., 2012, 32–33, p 2155–2183

19.

D.C. Lagoudas, Shape Memory Alloys: Modeling and Engineering Applications, Springer, Berlin, 2010

20.

M.A. Qidwai and D.C. Lagoudas, Numerical Implementation of a Shape Memory Alloy Thermomechanical Constitutive Model Using Return Mapping Algorithms, Int. J. Numer. Method Eng., 2000, 6(47), p 1123–1168CrossRef

21.

J.G. Boyd and D.C. Lagoudas, A Thermodynamical Constitutive Model for Shape Memory Materials. Part I. The Monolithic Shape Memory Alloy, Int. J. Plast., 1996, 12(6), p 805–842CrossRef

22.

E.A. Pieczyska, Analiza doswiadczalna wlasciwosci termomechanicznych stopow TiNi oraz poliuretanu z pamiecia ksztaltu, Prace IPPT-IFTR Reports, Institute of Fundamental Technological Research of the Polish Academy of Sciences, 2008, (in Polish)

23.

E.A. Pieczyska, H. Tobushi, and K. Kulasiński, Development of Transformation Bands in TiNi SMA for Various Stress and Strain Rates Studied by a Fast and Sensitive Infrared Camera, Smart Mater. Struct., 2013, 22, p 035007CrossRef

Title: Development of Stress-Induced Martensitic Transformation in TiNi Shape Memory Alloy
Authors: Elzbieta Alicja Pieczyska
Maria Staszczak
Vladimir Dunić
Radovan Slavković
Hisaaki Tobushi
Kohei Takeda
Publication date: 01-07-2014
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 7/2014
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-014-0959-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7/2014

Accumulation of Residual Strain in TiNi Alloy During Thermal Cycling

Atomic Layer-Deposited Al2O3 Coatings on NiTi Alloy

Microstructure, Phase Transformations, and Properties of Hot-Extruded Ni-Rich NiTi Shape Memory Alloy

Improvement of Superelastic Performance of Ti-Nb Binary Alloys for Biomedical Applications

Corrosion of NiTi Wires with Cracked Oxide Layer

Simulations of Self-Expanding Braided Stent Using Macroscopic Model of NiTi Shape Memory Alloys Covering R-Phase

Premium Partners